Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Improving The Coefficient of Utilization of Material in Deep Drawing Process

딥드로잉공정에서의 재료 수율 향상에 관한 연구

  • 하종호 (전남과학대학 자동차과) ;
  • 강형선 (조선이공대학 하이테크 CAD/CAM과) ;
  • 백호현 (광주.전남지방 중소기업청)
  • Published : 2009.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding force and the punch load. As a result, if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum value of process variables.

Keywords

References

  1. Hyunbo Shim, Kichan Son, Kwanghee Kim, "Optimum blank shape design by sensitivity analysis," Journal of Materials Processing Technology. 104, pp. 191-199, 2000 https://doi.org/10.1016/S0924-0136(00)00556-2
  2. 이충호, 허훈, '박판금속 성형공정에서의 블랭크 설게 및 변형률 예측,' 대한기계학회논문집(A), 제20권, 제6호, pp. 1810-1818, 1996
  3. 김상도, 박민호, 서대교, '유한요소법을 이용한 임의의 단면 딮드로잉 제품의 소재형상설계,' 한국소성가공학회지, 제4권, 제4호, pp302-321, 1995
  4. 배원병, 허병우, 김호윤, 이영석, "사각 컵 드로잉 공정에서의 최적 블랭크 형상 결," 한국정밀공학회지, 제15권, 제12호, pp.68-71, 1998
  5. H. Gloeckl, K. Lange, "Computer aided design of blanks for deep drawn irregular shaped components," in: Proceedings of the 11th NAMRC, pp. 243-251, 1983
  6. X. Chen, R. Sowerby, "The development of ideal blank shapes by the method of plane stress characteristics," Int. J. Mech. Sci. 2, pp. 159-166, 1992
  7. T. Kuwabara, W.H. Si, "PC-based blank design system for deep drawing irregularly shaped prismatic shells with arbitrarily shaped flange," J. Mater. Process. Technol. 63, pp. 89-94, 1997 https://doi.org/10.1016/S0924-0136(96)02605-2
  8. H. Iseki, R. Sowerby, "Determination of the optimal blank shape when deep drawing nonaxisymmetric cups using a finite element method," JSME Int. J. Ser. A 38(4), pp. 473-479, 1995
  9. O. Barlat, J.L. Batoz, Y.Q. Guo, F. Mercier, H. Naceur, C. Knopf Lenoir, "Optimum blank design of blank contours using the inverse approach and a mathematical programming technique," in: Proceedings of the NUMISHEET'96, pp. 178-185, 1996
  10. 정동원, 양경부, 김광희, "원형컵 드로잉 공정에 미치는 영향인자에 관한 실험적 연구," 한국 소성가공학회지, 제8권, 제5호, pp. 449-453, 1999