• Title/Summary/Keyword: Blade-To-Blade

Search Result 3,209, Processing Time 0.04 seconds

( Studies on the Grassland Development in the Forest II. Effect of fertilizer ievel on qrowth and dry matter yield of grass-clover mixtures grown under pine trees (임간초지 개발에 관한 연구 II. 임간혼파초지에서 3요소 시비수준이 목초의 생육과 수량에 미치는 영향)

  • Han, Y.C.;Park, M.S.;Seo, S.
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.5 no.2
    • /
    • pp.136-142
    • /
    • 1985
  • For better grassland development in the forest, this field experiment was carried out to investigate the effect of thirteen different fertilizer levels of nitrogen(N), phosphorus ($P_2O_5$) and potassium ($K_2O$) on the botanical composition, growth and dry matter yield of grass-clover mixtures grown under trees with 40-50% of shading level. This experiment was arranged as a randomized block design with replications, and performed on the experimental field in the suburban forest of Suweon in 1984. The results obtained are summarized as follows: 1. Plant height and cover degree of grasses found to be high with 28 and 42kg N fertilizer per 10a, while those were the lowest with zero and N-zero fertilizer levels. The degree of bare land after the fourth cut was also high in the low N level. 2. A significant higher degree of leaf green and chlorophyll content of leaf blade was observed in the plot of 28 and 42 kg N per 10a when compared with low N fertilizer plot. However, leaf decay and plant type of grasses tended to be a little poor as the high N was applied. 3. the regrowth plant length and dry weight of grasses after the first cut increased significantly with 28 and 42 kg N fertilizer. However, those showed slightly increased regrowth in the plot of zero and N-zero fertilizer levels. 4. The dry matter yield of grasses was higher with 28 and 42 kg N than that of low N fertilizer level. Higher yields were obtained in the plot of standard ($N-P_2O_5-K_2O$=28-20-24 kg/10a), 50% increase of $N,P_2O_5K_2O$ and N-50% increase, although there were no significant differences among three fertilizer levels. 5. Growth, botanical composition, regrowth and yield of grasses grown under pine trees were significantly influenced by N fertilizer level, regardless of $P_2O_5\;and\;K_2O$. The fertilizer level of $N-P_2O_5-K_2O$ was 28-20-24 kg per 10a for more forage production in the forest. Considering economic yield in this study, however, the optimum fertilizer level of N, $P_2O_5\;and\;K_2O$ was suppose to be 21-28, 10-15, and 12-18kg per 10a, respectively.

  • PDF

Growth responses of kelp species Ecklonia cava to different temperatures and nitrogen sources (온도와 질소원 종류에 따른 대형갈조류 감태(Ecklonia cava)의 생장)

  • Choi, Sun Kyeong;Kang, Yun Hee;Park, Sang Rul
    • Korean Journal of Environmental Biology
    • /
    • v.38 no.3
    • /
    • pp.404-415
    • /
    • 2020
  • We investigated the seasonal variations in growth and physiological responses of the kelp species Ecklonia cava to different nitrogen sources to establish indoor culture conditions for mass production. Ecklonia cava was cultivated for 10 days in 16 combinations of seawater temperatures (15, 17, 21, and 25℃) and different nitrogen sources (control; NH-NH4+ 100 μM; NO-NO3- 100 μM; and NHNO-NH4+ 50 μM+NO3- 50 μM). The growth and growth rate of the blade were affected by temperature. The mean fresh weight and area-based daily growth rate were the highest (5.8±0.5 and 6.6±0.5% day-1, respectively) at 15℃ and the lowest (2.2±0.2 and 3.0±0.3% day-1, respectively) at 25℃. The daily growth rate was the highest in the NH and NO treatments and lowest in the control. The nitrate reductase activity of E. cava varied with water temperature (season). The highest activity was in the control (1.32±0.10 μmol NO2- g-1 dry weight h-1) and the lowest was in the NH treatment (0.25±0.02 μmol NO2- g-1 dry weight h-1). The photosynthetic pigment concentrations reached a maximum value in the NHNO treatment and a minimum value in the control. These results showed that water temperature played an important role in the cultivation of E. cava and that a single supply of NH4+ or NO3- may induce the accelerated growth of E. cava. The growth and physiological responses of E. cava to different nitrogen sources during each season provide valuable information for determining the optimal nitrogen source in E. cava cultivation under indoor conditions.

Leaf epidermal structure of the Allium L. and its taxonomic significance (부추속(Allium L.) 잎 표피의 구조와 이의 분류학적 중요성)

  • Choi, Hyeok-Jae;Jang, Chang-Gee;Ko, Sung-Chul;Oh, Byoung-Un
    • Korean Journal of Plant Taxonomy
    • /
    • v.34 no.2
    • /
    • pp.97-118
    • /
    • 2004
  • A comparative anatomical and ultrastructural study was undertaken to investigare on the leaf epidermis by light microscopy (LM) and scanning electron microscopy (SEM). On the basis of results from this study, it was grasped major characters of taxa and variation range of each character on the level of species, section and subgenus respectively. The shape of leaf epidermal cell was oblong to linear, which was varied by each taxon. Epidermal cell of taxa in sects. Microscordum, Anguinum, and Rhizirideum, which had wide leaf blade, oblong instead of linear shape in others examined taxa in this study. The leaf of taxa in sect. Anguinum was hypostomatic, while the rest of taxa had amphistomatic leaf. This was also one of characters which could discriminate taxa of sect. Anguinum from others. The guard cell in investigated taxa had not so much variation in the respect of its size. The number of stomata per unit area reduced by increasing size of epidermal cell, the fewest number of stomata per unit area was found in the taxa of sect. Anguinum. The type of stomatal apparatus of observed all taxa was anomocytic. It was found to know ultrastructural variation in the epidermal cell, like as patterns of sculpture on the cell wall, and features of deposition of wax by SEM. There were no depositions of wax in the taxa of sect. Microscordum and Anguinum, but fine thread-like structures which were parallel or cross to axis was found on the surface of epidermal cell respectively. The patterns of sculpture on the cell were prominent straight in sects. Recticulato-bulbosa and Rhizirideum, discontinuous line in the sect. Oreiprason. The epicuticular wax had been deposited on the surface of its epidermal cell in all taxa except sects. Microscordum and Anguinum.

A Study of Production Techniques of the Handles of Swords with Round Pommel Excavated from Jeollabuk-do Made in Before 6 Century (6세기 이전 제작된 전라북도 출토 소환두도의 병부(柄部) 제작기법 연구)

  • Lee, Young-Beom;Seo, Jeong-Ho
    • Journal of Conservation Science
    • /
    • v.25 no.1
    • /
    • pp.1-16
    • /
    • 2009
  • Jeollabuk-do is bounded by the sea, and Mahan Baekje culture have been established around a wide plain. Also, in southeastern, it was closed by Gaya kingdom where iron culture was prosperous at that time, a variety of the handles of swords with round pommel is excavated at present. The handles of swords with round pommel is the best amount of excavated objects among the swords with round pommel and producted object for the time. It supposes them to become the foundation of making the decorated swords with round pommel. But, the handles of swords with round pommel that don't have a pattern in handle is indifferent to study because the production method is simple in spite of that the value of archaeological data is sufficient. Therefore, in this study, it examined changed production techniques with the change of times concerning the handles of swords with round pommel of Mahan Baekje Gaya period(before 6C) excavated from Jeollabukdo through using X-rays in order to clarify a variety of production techniques of the handles of swords with round pommel correctly in accordance with a period of production and excavated place. As a result, identified production techniques using X-rays of the handles of swords with round pommel excavated around remains of Mahan Baekje Gaya period shows that production progress improved in order of all-in-one shape, hammer welding shape of the handle of round pommel, and two in body formation in accordance with age. Especially, in two in body shape, it products the handle of round pommel separately, after that it welds the handle of swords and then links the sword blade like a riveting or bottleneck and so on. Despite of improved hammer welding technique, the reason why it didn't utilize is it regards as inlay or gilt will be damaged. And it is judged by using riveting or bottleneck. Also, it appears to techniques of metal craft such as decoration of the handle, decoration of point of sword, inlay, and silver-plating in the period of appearing two in body shape. As clarifying correctly, it provides fundamental database of scientific research about a study of production techniques of handle of swords with round pommel.

  • PDF

Studies on the Productivity of Native Reed ( Phragmites communis Trinius ) III. Effect of cutting time on the regrowth and Feed composition of native reed (갈대의 생산력에 관한 연구 III. 예취시기가 갈대의 재생 및 사료성분에 미치는 영향)

  • Chun, W.B.;Yoon, C.;Son, M.H.
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.6 no.2
    • /
    • pp.78-83
    • /
    • 1986
  • This experiment was carried out in order to study the effect of cutting time on the regrowth and the feed composition in native reed. The first growth crops cut in June, July and October and the ratoon crops after cutting cut in October. The samples measured the plant height, leaf blade & sheath-stem ratio, grass yield, feed composition and invitro dry matter digestibility. The results are summarized as follow: 1. As the result of the grass productivity and nutrient yield, it was indicated that suitable cutting time of the native reed was from middle of June to middle of July. The yield of dry matter and in vitro digestible dry matter were much more in the first crops than in the ratoon crops in both of non-fertilizer and fertilizer(P < 0.01), and more in the fertilizer than in non-fertilizer in both of the first and ratoon crops(P < 0.01). 2. The contents of feed composition in native reed of non-fertilizer and fertilizer showed different trends between the first and ratoon crops. In case of the first crops, the contents of C. protein and C.fat were higher in fertilizer than in non-fertilizer and the contents of C. fiber, NDF and ADF were lower in fertilizer than in non-fertilizer, but these contents were not significantly different between non-fertilizer and fertilizer. In the ratoon crops, these contents between non-fertilizer and fertilizer were shown in a opposite manner to those in the first crops.

  • PDF

Removal Efficiency of Water Pollutants and Malodor of Pig Slurry using Biofiltration System (여재순환장치를 이용한 돈분뇨 슬러리의 오염물질 및 악취제거 효율)

  • Choi, D.Y.;Kwag, J.H.;Jeong, K.H.;Park, K.H.;Huh, M.Y.;Kim, J.H.;Kang, H.S.;Jeon, K.H.;Park, C.H.;Jeong, J.W.
    • Journal of Animal Environmental Science
    • /
    • v.15 no.3
    • /
    • pp.217-224
    • /
    • 2009
  • The pig slurry is one of important fertilizer source for production of crops in recent years, but it has many controversial points of utilization such as offensive odor, lack of spread equipment and farmland possession, respectively. This study was carried out in order to remove water pollutants and malodor of pig slurry using biofiltration system. The biofiltration system consists of pig slurry separator, mixing shift and attached blade for sawdust or ricehull, air injection nozzle and outlet for pig slurry and sawdust or ricehull. The characteristics pH, $BOD_5$ (Biochemical Oxygen Demand), $COD_{Mn}$ (Chemical Oxygen Demand), SS (Suspended Solid), T-N (Total Nitrogen), T-P (Total Phosphorus) of the untreated pig slurry used in this study were 7.2, 34,450, 24,604, 71,000, 4,194, $1,631\;ml/{\ell}$, respectively. The $NH_3$ (Ammonia) and $H_2S$(Hydrogen Sulfide) concentration were 70.0, 9.6 ppm, respectively. The initial total microorganisms of pig slurry were $5.0{\times}10^3\;cfu/ml$, and Salmonella, Bacillus were $5.8{\times}10^2$, $1.1{\times}10^3\;cfu/ml$, respectively. The filtration system was very effective on removal of water pollutants of pig slurry. The removal efficiency of the offensive odor of ammonia and hydrogen sulfide in sawdust was higher than those of ricehull. The total microorganisms and bacillus of pig slurry are on the increase by sawdust and ricehull, but Salmonella showed a tendency to decrease in number after that time. Accordingly, the filtration system was very effective to produce a good quality pig slurry.

  • PDF

CUTTING EFFICACY OF Er:YAG LASER AND CONVENTIONAL BUR IN DECIDUOUS AND PERMANENT TEETH (Er:YAG laser와 Conventional bur의 유치와 영구치 치아삭제효과 비교)

  • Park, In-Cheon;Lee, Chang-Seop;Lee, Nan-Young;Lee, Sang-Ho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.30 no.2
    • /
    • pp.272-285
    • /
    • 2003
  • This study was conducted to observe the microscopic structures of cavities formed after ablation of primary teeth, permanent teeth, enamel and dentin in using a bur and cavities formed after ablation using laser and the following results were obtained after comparing the effects of ablation. Using a #330 bur and Er:YAG laser irradiated at 150 mJ, 200 mJ, 250 mJ and 300 mJ all at the frequency of 5 Hz, 1 mm enamel and dentin samples were ablated and the ablation time was measured. In order to measure the surfaces ablated, 5 each of primary teeth and permanent teeth were ablated using a #330 bur and Er:YAG laser at 150 mJ, 200 mJ, 250 mJ and 300 mJ for 1 sec and the cross section and vertical section were observed. The following results were obtained : 1. Cutting time of Er:YAG laser was longer than that of conventinal high-speed bur regardless of teeth type. 2. Cutting on enamel, Cutting time of conventional high-speed bur in deciduous teeth was longer than in permanent teeth(P<0.05). But Er:YAG laser was not showed any difference between the deciduous and permanent teeth(P>0.05). 3. Cutting on dentin, Cutting time of conventional high-speed bur in permanent teeth was longer than deciduous teeth. Er:YAG laser of 150 mJ, 5 Hz in permanent teeth was longer than in deciduous teeth(p<0.05). But laser of other power did not showed mean difference. 4. The cavity surface treated with the convetional high-speed bur revealed a relatively flat appearance, almost covered with a debris-like smear layer. Cavity wall showed striped appearance because of blade of bur. 5. The cavity surface treated by the Er:YAG laser system was irregular or rough surface with the absence charring, carbonization, or cracking of the dentin. In addition, there was an absence of a smear layer. Cavity floor was round and relatively smooth. According to these results, cutting time of Er:YAG laser was almostly same in permanent and deciduous teeth, but more effective in dentin than enamel. Cutting the sample, Er:YAG laser was needed more time than conventional bur. But SEM findings suggested that laser device produced favorable surface characteristic(i.e, no smear layer, irregular surface, cracking).

  • PDF

Blue-green algae as a Potential agent Causing Turf Leaf Disease (잔디 엽병을 유발하는 잠재인자로서의 남조류(Blue-Green algae)에 대한 관찰보고)

  • Park, Dae-Sup;Lee, Hyung-Seok;Hong, Beom-Seok;Choi, Byoung-Man;Cheon, Jae-Chan
    • Asian Journal of Turfgrass Science
    • /
    • v.22 no.2
    • /
    • pp.161-170
    • /
    • 2008
  • Recently irregular dark-colored patches were found on the Kentucky teeing ground in a golf course in Gyunggi providence. Interestingly, blue-green algae from the leaf tissue sample containing black spot-stained symptoms were largely observed through microscopic study. In general, algae present on the upper soil surface or in the upper layer of root zone form dark brown layers of scum or crust, which invoked harmful effects to turf growth such as poor drainage, inhibition of new root development. In this observation, unlike the algae were sometime found in senescing leaves on contacted soil in July and August, the blue-green algae were detected within black spot-stained Kentucky bluegrass leaf tissues including leaf blade, ligule, auriclea as well as leaf sheath. The blue-green algae were also detected on the leaf and stem tissue adjacent to the symptomatic leaf tissues. Two species of blue-green algae, Phomidium and Oscillatoria, were greatly observed. Oscillatoria species was more commonly notified in all samples. In addition, the two species were found on a putting green showing yellow spot disease at another golf course in Gyunggi providence. The data from chemical control assay revealed that chemicals such as propiconazole, iprodione, and azoxystrobin decreased blue-green algae population and leaf spots, which finally resulted in enhanced leaf quality. All taken together, we strongly suggested that the disease-like phenomenon by blue-green algae might be very closely mediated with infection/translocation process in relation with turfgrass. It indicates that blue-green algae in turf management may play an adverse role as a secondary barrier as well as a pathogenic agent. This report may be helpful for superintendents to recognize and understand the fact that algae control should be provided more cautiously and seriously than we did previously in upcoming golf course management.

Fundamental Studies for the Production of Korea Ginseng(Panax ginseng)(II) -Study on the Variations and the Correlations of Important Quantitative characters of Korea Ginseng according to Environmental Conditions (우량인삼생산(優良人蔘生産)을 위(爲)한 육종생리학적(育種生理學的) 연구(硏究)(II) -재식위치(栽植位置)에 따르는 인삼(人蔘)의 주요량적(主要量的) 형질(形質)의 변이(變異)와 그 상호간(相互間)의 관계(關係))

  • Choi, B.Y.;Park, J.S.;Kim, Y.R.;Kim, M.K.;Jo, J.S.;Kim, C.S.
    • Korean Journal of Agricultural Science
    • /
    • v.2 no.1
    • /
    • pp.131-142
    • /
    • 1975
  • This study was carried out to define the variations of important quantitative characters and correlations among them accoding to the planted location under the shadow by planting density. The results obtained are summarized as follows; 1. Growth of leaf and stem of 6 rows and 8 rows planting plots was decreased at front and back rows, but that of root was increased at front row and also decreased at back row. However, at 4 rows planting plots, front row was better for the growth of leaf, stem and root. 2. Average root weight of 6 rows planting plot was 34.29g but that of 8 rows planting plot was ]8.20 g. And total weight of root per unit area was increased and quality of ginseng was better in 6 rows planting plot compaired with 8 rows. 3. Variation by planting locations under the shadow was smallest in stem diameter and highest in root length at 8 row planting plot, but at 6 rows planting plot, that was smallest in leaf blade and greatest in stem length. However, in 4 rows plant ing plot, variation of leaf length was smallest and that of root weight biggest. 4. In all Planting densities, root weight was significantly correlated with root diameter and high correlation was recognized between root diameter and stem diameter. 5. Rate of variations of all characters among plant individuals was different by planting location and that of correlations between quantitative Characters too.

  • PDF

Fractionation of Heavy Metals and Correlation with Their Contents in Rice Plant Grown in Paddy near Smelter Area (제련소 인근 논 토양 중 중금속 형태 분류 및 수도체중 중금속 함량과의 상관성)

  • Kim, Seong-Jo;Baek, Seung-Hwa;Moon, Kwang-Hyun
    • Korean Journal of Environmental Agriculture
    • /
    • v.15 no.1
    • /
    • pp.1-10
    • /
    • 1996
  • The contents of heavy metals in soil near the Janghang smelter area were observed to understand present status and relationship between their fraction and the absorption by rice. The soil samples were taken from the eight sites of the paddy fields in 1982 and 1990, and analysis on heavy metals including Cd, Zn, Cu and Pb was performed. The results were as follows: Total contents of heavy metals in the samples of 1990 were higher than those of 1982. The order of increasing ratio was Cu > Zn > Pb > Cd and the variation of Cd content by sequential differente extracting was residual > exchangeable > dilute acid-extractable fractions and its increasing range was from 38 to 71% during nine years. The ratio of immobile heavy metals bound within an oxide or silicate matrix of Fe-Mn oxide bound and residual in surface soil was that Cd, Pb, Cu and Zn were 31.65, 42.22, 76.57 and 79.49%, respectively, and their mobile ratios of exchangeable, dilute acid-extractable and organically bound were more than 20.28%. Those of mobile Cd, Pb, Cu and Zn were 68.35, 55.78, 23.43 and 20.28%, respectively. Correlation between the heavy metal contents in surface soil and those in tissue of rice plant, such as leaf blade, leaf sheath, stem and panicle axis, were significant, but were not significant in subsurface soil. The dilute acid-extractable and organically bound fractions of Cd, Cu, Pb and Zn in surface soil were more significantly correlated with those in tissues of paddy rice.

  • PDF