• Journal of IKEEE
• /
• v.8 no.2 s.15
• /
• pp.161-165
• /
• 2004

In this paper, an 8bit wave pipelined adder using the static CMOS plus Edge-Sensing Completion Detection Logic is presented. The clockless wave-pipelining algorithm was implemented in the circuit design. The Edge-Sensing Completion Detection (ESCD) in the algorithm is consisted of edge-sensing circuits and latches. Using the algorithm, skewed data at the output of 8bit adder could be aligned. Simulation results show that the adder operates at 1GHz in $0.35{\mu}m$ CMOS technology with 3.3V supply voltage.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.383-388
• /
• 2007

In this paper, we propose a new signal frame structure based on Alamouti code that can maintain the same performance as Alamouti code and increase spectral efficiency. The proposed signal frame structure can increase spectrum efficiency to approach 1(bit/s/Hz) since it can process n bit data during (n+1) time slot. In order to verify two performances, we derive closed form BER via mathematical approach, and compare with the simulation result in Rayleigh fading plus AWGN channel. Then we find that the two performances are exactly same.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.05a
• /
• pp.42-43
• /
• 1997

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.44-44
• /
• 2001

본 논문에서는 CMOS로 구현된 3.3V 8-bit 200MSPS의 Folding / Interpolation 구조의 A/D 변환기를 제안한다. 회로에 사용된 구조는 FR(Folding Rate)이 8, NFB(Number of Folding Block)가 4, Interpolation rate 이 8이며, 분산 Track and Hold 구조를 회로를 사용하여 Sampling시 입력주파수를 Hold하여 높은 SNDR을 얻을 수 있었다. 고속동작과 저 전력 기능을 위하여 향상된 래치와 디지털 Encoder를 제안하였고 지연시간 보정을 위한 회로도 제안하였다. 제안된 ADC는 0.35㎛, 2-Poly, 3-Metal, n-well CMOS 공정을 사용하여 제작되었으며, 유효 칩 면적은 1070㎛×650㎛ 이고, 3.3V전압에서 230mW의 전력소모를 나타내었다. 입력 주파수 10MHz, 샘플링 주파수 200MHz에서의 INL과 DNL은 ±1LSB 이내로 측정되었으며, SNDR은 43㏈로 측정되었다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.38-47
• /
• 1999

We have designed a 16bit adder which reduces the power consumption at each level of architecture, logic and transistor. The conventional ELM adder has a major disadvantage which makes glitch in the G cell when the particular input bit patterns are applied, because of the block carry generation signal computed by the input bit pattern. Thus, we propose a low power adder architecture which can automatically transfer each block carry generation signal to the G cell of the last level to avoid glitches for particular input bit patterns at the architecture level. We also use a combination of logic styles which is suitable for low power consumption with static CMOS and low power XOR gate at the logic level. Futhermore, The variable-sized cells are used for reduction of power consumption according to the logic depth of the bit propagation at the transistor level. As a result of HSPICE simulation with $0.6\mu\textrm{m}$ single-poly triple-metal LG CMOS standard process parameter, the proposed adder is superior to the conventional ELM architecture with fixed-sized cell and fully static CMOS by 23.6% in power consumption, 22.6% in power-delay-product, respectively.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.201-210
• /
• 2005

This paper proposes a power efficient 2-dimensional DCT/IDCT architecture driven by input data to be processed. The architecture achieves low power by taking advantage of the typically large fraction of zero and small-valued input processing data in video and image data compression. In particular, it skips multiplication by zero and dynamically activates/deactivates required bit-slices of fine-grain bit partitioned adders within multipliers and accumulators using simple input ANDing and bit-slice MASKing. The processed results from 1-D DCT/IDCT do not have unnecessary sign extension bits (SEBs), which are used for further power reduction in matrix transposer. The results extracted by bit-level transition activity simulations indicate significant power reduction compared to conventional designs.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.6
• /
• pp.77-87
• /
• 2001

This paper describes a design of cryptographic processor that implements the Rijndael cipher algorithm, the Advanced Encryption Standard algorithm. It can execute both encryption and decryption, and supports only 128-bit block and 128-bit keys. As the processor is implemented only one round, it must iterate 11 times to perform an encryption/decryption. We implemented the ByteSub and InvByteSub transformation using the algorithm for minimizing the increase of area which is caused by different encryption and decryption. It could reduce the memory size by half than implementing, with only ROM. We estimate that the cryptographic processor consists of about 15,000 gates, 32K-bit ROM and 1408-bit RAM, and has a throughput of 1.28 Gbps at 110 MHz clock based on Samsung 0.5um CMOS standard cell library. To our knowledge, this offers more reduced memory size compared to previously reported implementations with the same performance.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.13-19
• /
• 1999

This paper describes a design of an 8-bit 100KSPS 1mW CMOS A/D Converter. Using a novel systematic offset cancellation technique, we reduce the systematic offset voltage of operational amplifiers. Further, a new Gain amplifier is proposed. The proposed A/D Converter is fabricated with a $0.6{\mu}m$ single-poly triple-metal n-well CMOS technology. INL and DNL is within ${\pm}1LSB$, and SNR is about 43dB at the sampling frequency of 100KHz. The power consumption is $980{\mu}W$ at +3V power supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.67-74
• /
• 2005

Crypto-systems have difficulties in designing hardware due to the various standards. We propose a programmable and configurable architecture for cryptography coprocessors to accommodate various crypto-systems. The proposed architecture has a 32 bit I/O interface and internal bus width, and consists of a programmable finite field arithmetic unit, an input/output unit, a register file, and a control unit. The crypto-system is determined by the micro-codes in memory of the control unit, and is configured by programming the micro-codes. The coprocessor has a modular structure so that the arithmetic unit can be replaced if a substitute has an appropriate 32 bit I/O interface. It can be used in many crypto-systems by re-programming the micro-codes for corresponding crypto-system or by replacing operation units. We implement an elliptic curve crypto-processor using the proposed architecture and compare it with other crypto-processors

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.1
• /
• pp.56-63
• /
• 2008

This paper describes a 12 bit 1GS/s current mode segmented DAC for WCDMA communication. The proposed circuit in this paper employes segmented structure which consists of 4bit binary weighted structure in the LSB and 4bit thermometer decoder structure in the mSB and MSB. The proposed DAC uses delay time compensation circuits in order to suppress performance decline by delay time in segmented structure. The delay time compensation circuit comprises of phase frequency detector, charge pump, and control circuits, so that suppress delay time by binary weighted structure and thermometer decoder structure. The proposed DAC uses CMOS $0.18{\mu}m$ 1-poly 6-metal n-well process, and measured INL/DNL are below ${\pm}0.93LSB/{\pm}0.62LSB$. SFDR is approximately 60dB and SNDR is 51dB at 1MHz input frequency. Single DAC's power consumption is 46.2mW.