• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.424-430
• /
• 2011

Biodegradable poly[(glycine ethyl ester)-(phenylalanine ethyl ester) phosphazene](PGPP) microparticles were fabricated by electrohydrodynamic atomization to apply drug release test. Atomization parameters such as applied voltage, polymer concentration, and molecular weight were investigated to inspect their effects on the size and morphology of microparticles. The average diameter of PGPP microparticles decreased as increasing applied voltage and solution flow rate. Dichloromethane/dioxane mixture shows better results for the preparation of microparticles than single solvent owing to the different PGPP solubility in solvent. Blending PGPP polymers with proper molecular weights not only favored the production of spherical PGPP microparticles via electrohydrodynamic atomization, but also provided a way to adjust drug (rifampicin) release behavior. Drug-loaded biodegradable polyphosphazene microspheres can be fabricated via electrohydrodynamic atomization, which has potential use in biomedical applications.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.12
• /
• pp.1981-1984
• /
• 2006

Novel amphiphilic, thermo-responsive polyaspartamides which showed both LCST (lower critical solution temperature), and sol-gel transition were prepared and characterized. The polyaspartamide derivatives were synthesized from polysuccinimide, the polycondensate of aspartic acid monomer, via successive nucleophilic ring-opening reaction by using dodecylamine and N-isopropylethylenediamine (NIPEDA). At the intermediate composition ranges, the dilute aqueous solution exhibited a thermally responsive phase separation due to the presence of LCST. The phase transition temperature was controllable by changing the content of pendent groups. In addition, a physical gelation, i.e. the sol-gel transition was observed from the concentrated solutions, which was elucidated by dynamic viscoelastic measurements. These novel injectable and thermo-responsive hydrogels have potential for various biomedical applications such as tissue engineering and current drug delivery system.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.199-204
• /
• 2007

Nanomedicine is a young and rapidly emerging field, which integrates clinical medicine with nanotechnology. Although the commercial nanomedicine is still in a fairly embryonic state, the recent advances in the nanotechnology-based therapeutics and diagnosis has changed the landscape of medicine. Bibliometric analysis shows a surge in research activity over the past decade. In this review, we have discussed some of the promising materials and their applications to this nascent field, such as carbon nanomaterials, polymeric drug delivery systems, and diagnostic imaging agents.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.227-228
• /
• 1998

Lumbrokinase, potent fibrinolytic enzyme purified from earthworm, was immobilized onto polyurethane valves using photoreaction, photoreactive polyallyl-amino as a photoreactive linker. For evaluation of blood compatibility, lumbrokinase immobilized polymer valves were assembled into the total artificial heart (TAH). This TAH was implanted to 60kg healthy lamb for 1-3 days with the cardiac output 5 L/min. In the control lamb, the valves were untreated, in ore other, only valves on the right were treated, and in the remaining animal, only those on the left. To facilitate the thrombus formation, low doses of heparin were administered. For evaluation of the immobilized lumbrokinase, thrombus formation, proteolytic and fibrinolytic activity was measured. This data shows that lumbrokinase-treated polyurethane valves lead to decreased thrombus formation in vivo, and that their biocompatibility is therefore higher than that of untreated valves.

• Journal of Biomedical Engineering Research
• /
• v.12 no.3
• /
• pp.157-164
• /
• 1991

Microvel $^{\textregistered}$ double velour graft impregnated with a biodegradable algin was studied as a new vatscular graft. It is impervious to blood but still retains high porosity. This graft does not require preclotting during implantation and has good tissue ingrowth and biological healing properties. Two vascular grafts impregnated with algin (6mm in diameter) were implanted in the aorta of mongrel dogs without preclotting. Two identical grafts were preclctted and served as controls. The grafts were harvested 2 and 4 months postoperatively, and the healing pattern was examined by a light microscope after hemRtoxylineosin staining. It was observed that endothelial cells were incompletely covered on both algin-impregnated and control grafts after 2 month Implantation, while they were fully covered on both grafts after 4 month. There were no significant differences in subendothelial granulation tissue organization and fibrinoid material absorption between the algin-impregnated and control grafts. The algin-impregnated graft did not show any harmful effect on the healing and thus can be a new promising graft which is not necessary preclotting during the implantation.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.167-175
• /
• 2005

This review explores recent works involving the use of the self-assembled nanoparticles of bile acid-modified glycol chitosans (BGCs) as a new drug carrier for cancer therapy. BGC nanoparticles were produced by chemically grafting different bile acids through the use of l-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). The precise control of the size, structure, and hydrophobicity of the various BGC nanoparticles could be achieved by grafting different amounts of bile acids. The BGC nanoparticles so produced formed nanoparticles ranging in size from 210 to 850 nm in phosphate-buffered saline (PBS, pH=7.4), which exhibited substantially lower critical aggregation concentrations (0.038-0.260 mg/mL) than those of other low-molecular-weight surfactants, indicating that they possess high thermodynamic stability. The SOC nanoparticles could encapsulate small molecular peptides and hydrophobic anticancer drugs with a high loading efficiency and release them in a sustained manner. This review also highlights the biodistribution of the BGC nanoparticles, in order to demonstrate their accumulation in the tumor tissue, by utilizing the enhanced permeability and retention (EPR) effect. The different approaches used to optimize the delivery of drugs to treat cancer are also described in the last section.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.11-15
• /
• 1997

We used the photoreactive poly(allylamie) (PPA) as the hydrophilic membrane to control the release of drug from polyurethane(PU). PPA was covalently bonded onto PU surface through the highly reactive nitrene intermediate upon UV light irradiation $(3.3mW/cm^2)$ at 254nm for 5min. Thus the release rate of rifampicin from PU surface was controlled. To know the characteristics of PU surface bonded with PPA, we measured the ATR-FTIR, ESCA, Static Contact Angle and SEM. From these, we suggest that PPA as a hydrophilic membrane is enable to control the release rate of a hydrophobic drug from polymer without the change of bulk property.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.44.1-44.1
• /
• 2010

poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a bacterially derived copolymer produced by fermentation. PHBV has been attractive because of its potential environmental, pharmaceutical and biomedical applications. Recently, the electrospinning technique has been used to fabricate fibrous mat for biomedical applications such as artificial blood vessel, drug release and scaffolds, because this method is simple and easy to get ultrafine polymer fibers. Depending on speed of rotation drum collector, fiber structure was different. In this work, PHBV fiber was aligned by electrospinnning machine. Furthermore, alignment of PHBV fiber mats was given angle such as $45^{\circ}$, $60^{\circ}$ and $90^{\circ}$. The morphology of each aligned PHBV fiber mat was observed by SEM technique. The mechanical property was evaluated depending on alignment angle. Especially, cell attachment ability depending on alignment of PHBV fiber mats was carried out using MG- 63 osteoblast like cells.

• Journal of Biomedical Engineering Research
• /
• v.27 no.5
• /
• pp.224-228
• /
• 2006

The object of this study is to investigate the potential of dual-electrospun polymer based structure for vascular tissue engineering, especially for the medium or small sue blood vessels. Polyurethane(PU), which is known to be biocompatible in this area, was electrospun with poly(ethylene oxide) (PEO). Concentration of PU was fixed at 20wt%, while that of PEO was set from 15 to 35wt%. Morphological features were observed by SEM image and measurement of porosity and cellular responses were tested before and after extracting PEO from the hybrid scaffolds by immersing the scaffolds into distilled water. The diameter of PEO fibers were ranged from 200nm to 500nm. The lower concentration of PEO tended to show beads. The porosity of the scaffolds after extracting PEO was highly increased with higher concentration of PEO as expected. Also, higher proliferation rate of smooth muscle cells was observed at higher concentration of PEO than at the lower concentration and without PEO. As conclusions, this dual electrospinning technique combined with PU and PEO is expected to overcome the current barrier of cell penetration by providing more space for cells to proliferation.

• Macromolecular Research
• /
• v.12 no.6
• /
• pp.573-580
• /
• 2004

To prepare chitosan-based polymeric amphiphiles that can form nanosized core-shell structures (nanopar­ticles) in aqueous milieu, chitosan oligosaccharides (COSs) were modified chemically with hydrophobic cholesterol groups. The physicochemical properties of the hydrophobized COSs (COSCs) were investigated by using dynamic light scattering and fluorescence spectroscopy. The feasibility of applying the COSCs to biomedical applications was investigated by introducing them into a gene delivery system. The COSCs formed nanosized self-aggregates in aqueous environments. Furthermore, the physicochemical properties of the COSC nanoparticles were closely related to the molecular weights of the COSs and the number of hydrophobic groups per COS chain. The critical aggregation concentration values decreased upon increasing the hydrophobicity of the COSCs. The COSCs effi­ciently condensed plasmid DNA into nanosized ion-complexes, in contrast to the effect of the unmodified COSs. An investigation of gene condensation, performed using a gel retardation assay, revealed that $COS6(M_n=6,040 Da)$ containing $5\%$ of cholesteryl chloroformate (COS6C5) formed a stable DNA complex at a COS6C5/DNA weight ratio of 2. In contrast, COS6, the unmodified COS, failed to form a stable COS/DNA complex even at an elevated weight ratio of 8. Furthermore, the COS6C5/DNA complex enhanced the in vitro transfection efficiency on Human embryonic kidney 293 cells by over 100 and 3 times those of COS6 and poly(L-lysine), respectively. Therefore, hydrophobized chitosan oligosaccharide can be considered as an efficient gene carrier for gene delivery systems.