• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.377-381
• /
• 2013

Thevetia peruviana (Yellow Oleander) seed oil was extracted with n-hexane in a soxhlet extractor. The ethanolysis and methanolysis of the oil were carried out with 50% of potassium hydroxide in ethanol and methanol respectively by weight of oil, as catalyst. The biodiesel was tested for biodegradability using E. coli. The percentage yield of the FAEE and FAME were 84.8% and 91.6% respectively. The biodegradability values of 81.4% and 86.2% were obtained for FAEE and FAME respectively after a period of 28 days. Other fuel quality parameters determined are the cetane index of 47.19 (FAEE) and 58.97 (FAME), flash point of $198^{\circ}C$ (FAEE) and $175^{\circ}C$ (FAME), kinematic viscosity at $40^{\circ}C$ of 5.21 $mm^2s^{-1}$ (FAEE) and 5.10 $mm^2s^{-1}$(FAME), pour point of $4^{\circ}C$ (FAEE) and $-2^{\circ}C$ (FAME) and a cloud point of $6^{\circ}C$ (FAEE) and $3^{\circ}C$ (FAME). Thus, Thevetia peruviana oil has a high potential for use in production of environmentally friendly biodiesel.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.214-221
• /
• 2008

The production of biodiesel by transesterification of waste frying oil was conducted on various zeolite catalysts with different acidity and pore structure. $H^+$ ion exchanged MOR, MFI, FAU, and BEA zeolites were employed in the reaction with silicalite which has no strong acid sites. $H^+$ ion exchanged MOR(10) zeolite, which has more acid sites and stronger acid strength than other zeolites, exhibited the highest methyl esters yield as 95%. Dealumination to the HMOR zeolite induced decreasing of acid amount and acid strength. It brought about the decrease of fatty acid methyl esters (FAME) yield. The yield increased linearly with enhancing of acid strength and increasing of amount of strong acid sites. The yields were independent on pore structure of the zeolites.

• New & Renewable Energy
• /
• v.9 no.3
• /
• pp.36-42
• /
• 2013

To secure raw materials of biodiesel production, the possibility of camellia (C. japonica L.) and tea (C. sinensis L.) seed oil was studied to produce biodiesel. In this research, crude oil contents and fatty acid compositions of seeds were analyzed by Solxlet and Gas chromatography (GC). The oil contents in the seeds of camellia were 69.8%~73.8%, and tea were 26.3%~29.4%. Among the fatty acids of camellia and tea oil, oleic acid was dominant. The unsaturated fatty acids accounted for 88.4% and 80.2% of the whole fatty acids of camellia and tea seed oil. Total seed oil content and fatty acid composition of tea seed were influenced by collecting date. Across maturation period, oil content of tea seed averaged 18.3% on $6^{th}$ September increasing to 27.9% by $11^{th}$ October. For largest seed yield and oil content, the optimum time to harvest tea is in middle october, and camellia is late september and thereafter. The extraction efficiency of oil from seeds by extraction methods was determined. Biodiesel were synthesized in 92.1~92.8% yields from camellia and tea oils by transesterification. The biodiesel was characterized by its physical and fuel properties including oxidation stability, iodine value and cold filter plugging point (CFPP). Oxidation stability of camellia was 8.6~8.8 hours and tea was 2.9~3.6 at $110^{\circ}C$. Camellia oil had considerably better oxidation stability and CFPP than tea oil.

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.27-34
• /
• 2023

In this study, microalgal oil was extracted from Nannochloropsis oceanica cultured in an open raceway pond and converted into biodiesel using a solid acid catalyst. Microalgal oil was extracted from two types of microalgae with and without nitrogen starvation using the KOH-solvent extraction method and the fatty acid content and oil extraction yield from each microalgae were compared. The fatty acid content of N. oceanica was 184.8 mg/g cell under basic conditions, and the oil content increased to 340.1 mg/g under nitrogen starvation conditions. Oil extraction yields were 90.8 and 95.4% in the first extraction, and increased to 97.5 and 98.8% after the second extraction. Microalgal oil extracted by KOH-solvent extraction was yellow in color and had reduced viscosity due to chlorophyll removal. In biodiesel conversion using the catalyst SO₄^2-/HZSM-5, solvent-extracted oil showed a FAME content of 4.8%, while KOH-solvent-extracted oil showed a FAME content of 90.4%. Solid acid catalyst application has been made easier by removal of chlorophyll from microalgal oil. The FAME content increased to 96.6% upon distillation, and the oxidation stability increased to 11.07 h with addition of rapeseed biodiesel and 1,000 ppm butylated hydroxyanisole.

• Korean Journal of Microbiology
• /
• v.54 no.2
• /
• pp.140-145
• /
• 2018

The most energy-intensive processes in lipids extraction were the disruption of the cell wall of microalgae. Here, we tried to extract lipids through lysis using virus-infecting microalgae, to compare with those by the other two methods using microwave or ultrasonication. The lipids yield using viral infection was not significantly different from those using ultrasonication and microwave oven. This suggests that the same amount of lipids can be obtained with low energy and costs, as well as that microalgal lipids extraction by chlorella virus infection might provide the price competitiveness in biodiesel production even if it will be applied to mass production facilities.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.301-304
• /
• 2019

Microwave was designed for lipid extraction from green algae (Spirulina platensis). Microalgae-solvent (various solvents) were extracted and heated using microwave at 600 W for around 40 min. The maximum yield obtained within this period was 12.530% of lipid compared to just 1.293% for Soxhlet extraction. Lipid analysis revealed that those with higher essential fatty acid content consist of saturated fatty acid (SAFA) and polyunsaturated fatty acid (PUFA) which could be used for biodiesel production.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.385-390
• /
• 2010

Transesterifications of vegetable oils (soybean oil, grapeseed oil, corn oil, canola oil) by ultrasonic energy were examined on various catalysts for biodiesel production. Reaction activities of the transesterifications were evaluated to the ultrasonic energy and thermal energy. The physicochemical properties and product distribution were also investigated to the biodiesels produced from the oils in the reaction using ultrasonic energy. The yields of fatty acid methyl ester (FAME) on the alkali catalysts were higher than those on the acid catalysts. The highest FAME yield was obtained as 83% on potassium hydroxide catalyst in the transesterification. The effective reaction conditions by ultrasonic energy were 1 wt% catalyst loading and 6:1 molar ratio of methanol to vegetable oils. The reaction rate of the transesterification by ultrasonic energy was faster than that by thermal energy. The acid values of the biodiesel products were improved above 30% compared to those of the feedstocks.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.137-146
• /
• 2007

The substitution of fossil fuels with biofuels has been proposed by the European Union (EU) as part of a strategy to mitigate greenhouse gas emissions from road transport, increase security of energy supply and support the development of rural communities. Vegetable oils and their derivatives (especially methyl esters), commonly referred to as 'biodiesel', are prominent candidates as alternative diesel fuels. They have advanced from being purely experimental fuels to the initial stages of commercialization. They are technically competitive with or offer technical advantages compared to conventional diesel fuel. However, several problems remain including economics, combustions, some emissions, lube oil contamination, and low-temperature properties. Therefore, quality control of fuel-related properties of biodiesel is needed to obtain consistent engine performance by fuel users. The quality of the fuel is affected by the oil composition. Rapeseed oil has been targeted for fuel use because it produces an oil with a close-to-optimum set of fuel characteristics. In this paper we have reviewed past and current efforts, both by traditional seed-breeding methods and by genetic engineering, to modify rapeseed oil quality and yield.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.472-481
• /
• 2011

It is known that the content of saturated fatty acids methyl ester (SFAME) affect the pour point of biodiesel at low temperature. In this study, biodiesel (BD) was produced from beef tallow (TAL) by alkali catalyst. To reduce the saturation in BD, acetone fractionation was applied. Besides, TAL was also solvent-fractionated to reduce the saturated fatty acid (SFA) content for further producing BD. With acetone, TAL or TAL methyl ester (5:1 v/w) were fractionated at 10, 0, -10, and $-15^{\circ}C$, respectively. At $-10^{\circ}C$, 17.35% of SFA was observed in fractionated TAL (liquid part, -10TAL) when 5:1 solvent ratio was used for 24 hr. Under the same condition, fractionated BD (liquid part, -10BD) showed SFA (33.14%) with 78wt % yield. Also, fractionation of BD with different concentration of crystallizer 209 (0.1, 0.5, and 1%) along with different time (2, 6, 12, and 24 hr.) was observed. The best condition for reducing the SFA was 0.5% of crystallizer 209 addition for 12 hr of fractionation time at $-10^{\circ}C$, in which 30.14% of SFA content was observed in BD (liquid part). Among different crystallizer, ps 66 showed the least content of SFA content (23.28%) in BD after fractionation ($-10^{\circ}C$ and 24 hr) with 0.5wt% addition.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.7
• /
• pp.1278-1284
• /
• 2016

Rhizopus chinensis cells immobilized on loofah (Luffa cylindrica) sponges were used to produce biodiesel via the transesterification of soybean oil. In whole-cell immobilization, loofah sponge is considered to be a superior alternative to conventional biomass carriers because of its biodegradable and renewable properties. During cell cultivation, Rhizopus chinensis mycelia can spontaneously and firmly adhere to the surface of loofah sponge particles. The optimal conditions for processing 9.65 g soybean oil at 40℃ and 180 rpm using a 3:1 methanol-to-oil molar ratio were found to be 8% cell addition and 3-10% water content (depending on the oil's weight). Under optimal conditions, an over 90% methyl ester yield was achieved after the first reaction batch. The operational stability of immobilized Rhizopus chinensis cells was assayed utilizing a 1:1 methanol-to-oil molar ratio, thus resulting in a 16.5-fold increase in half-life when compared with immobilized cells of the widely studied Rhizopus oryzae. These results suggest that transesterification of vegetable oil using Rhizopus chinensis whole cells immobilized onto loofah sponge is an effective approach for biodiesel production.