• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.211-232
• /
• 2019

Porous ceramics are promising materials for a number of functional and structural applications that include thermal insulation, filters, bio-scaffolds for tissue engineering, and preforms for composite fabrication. These applications take advantage of the special characteristics of porous ceramics, such as low thermal mass, low thermal conductivity, high surface area, controlled permeability, and low density. In this review, we emphasize the direct foaming method, a simple and versatile approach that allows the fabrication of porous ceramics with tailored microstructure, along with distinctive properties. The wet foam stability is achieved under the controlled addition of amphiphiles to the colloidal suspension, which induce in situ hydrophobization, allowing the wet foam to resist coarsening and Ostwald ripening upon drying and sintering. Different components, like contact angle, adsorption free energy, air content, bubble size, and Laplace pressure, play vital roles in the stabilization of the particle stabilized wet foam to the porous ceramics. The mechanical behavior of the load-displacements curves of sintered samples was investigated using Herzian indentations testes. From the collected results, we found that microporous structures with pore sizes from 30 ㎛ to 570 ㎛ and the porosity within the range from 70% to 85%.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.850-855
• /
• 2009

Keratin is an important protein used in wound healing and tissue recovery. In this study, keratin was modified chemically with iodoacetic acid (IAA) to enhance its solubility in organic solvent. Poly(hydroxybutylate-co-hydroxyvalerate) (PHBV) and modified keratin were dissolved in hexafluoroisopropanol (HFIP) and electrospun to produce nanofibrous mats. The resulting mats were surface-characterized by ATR-FTIR, field-emission scanning electron microscopy (FE-SEM) and electron spectroscopy for chemical analysis (ESCA). The pure m-keratin mat was cross-linked with glutaraldehyde vapor to make it insoluble in water. The biodegradation test in vitro showed that the mats could be biodegraded by PHB depolymerase and trypsin aqueous solution. The results of the cell adhesion experiment showed that the NIH 3T3 cells adhered more to the PHBV/m-keratin nanofibrous mats than the PHBV film. The BrdU assay showed that the keratin and PHBV/m-keratin nanofibrous mats could accelerate the proliferation of fibroblast cells compared to the PHBV nanofibrous mats.

• Composites Research
• /
• 제35권4호
• /
• pp.232-241
• /
• 2022

가소제는 가공성 및 연성과 같은 기계적 특성에 바람직한 영향을 미치기 위해 중합체에 첨가되는 화학 첨가제이다. 본 논문에서는 플라스틱 시장에서 전통적으로 사용되어온 프탈레이트 기반 가소제를 대체할 수 있는 친환경 가소제의 사용과 시장에 대해 탐구한다. 바이오 가소제는 주로 농산물, 부산물 및 폐기물을 포함하는 바이오 매스 소스에서 파생된다. 바이오 매스 공급원과 관계없이 이상적인 친환경 가소제는 무독성이며, 휘발·추출·이행 현상에 대한 저항성이 높고, 상용성과 혼화성이 좋으며, 경제적이어야 한다. 글로벌 바이오 가소제 시장은 2020년 13억 달러에서 2030년까지 21억 달러에 이를 것으로 전망되며, 2021년에서 2030년까지 5.31% CAGR로 성장할 것으로 예상된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.4-4
• /
• 2012

Proteins enable biology to be viable through molecular interactions (such as in antigen-antibody, ligand-receptor, and drug-target) with

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.177-181
• /
• 2012

Copper composite materials have attracted wide attention for energy applications. Especially $CuInS_2$ has a desirable direct band gap of 1.5 eV, which is well matched with the solar spectrum. $CuInS_2$ nanoparticles could make it possible to develop color-tunable $CuInS_2$ nanoparticle emitter in the near-infrared region (NIR) for energy application and bio imaging sensors. In this paper, $CuInS_2$ nanoparticles were successfully synthesized by thermo-decomposition methods. Surface modification of $CuInS_2$ nanoparticles were carried out with various semiconductor materials (CdS, ZnS) for enhanced optical properties. Surface modification and silica coating of hydrophobic nanoparticles could be dispersed in polar solvent for potential applications. Their optical properties were characterized by UV-vis spectroscopy and photoluminescence spectroscopy (PL). The structures of silica coated $CuInS_2$ were observed by transmission electron microscopy (TEM).

• Environmental Engineering Research
• /
• 제13권1호
• /
• pp.19-27
• /
• 2008

Simultaneous removal of ternary gases of $NH_3$, $H_2S$ and toluene in a contaminated air stream was investigated over 180 days in a biofilter. A commercially available inorganic/polymeric composite chip with a large void volume (bed porosity > 0.80) was used as a microbial support. Multiple microorganisms including Nitrosomonas and Nitrobactor for nitrogen removal, Thiobacillus thioparus (ATCC 23645) for $H_2S$ removal and Pseudomonas aeruginosa (ATCC 15692), Pseudomonas putida (ATCC 17484) and Pseudomonas putida (ATCC 23973) for toluene removal were used simultaneously. The empty bed residence time (EBRT) ranged from 60 - 120 seconds and the inlet feed concentration was $0.0325\;g/m^3-0.0651\;g/m^3$ for $NH_3$, $0.0636\;g/m^3-0.141\;g/m^3$ for $H_2S$, and $0.0918\;g/m^3-0.383\;g/m^3$ for toluene, respectively. The observed removal efficiency was 2% - 98% for $NH_3$, 2% - 100% for $H^2S$, and 2% - 80% for toluene, respectively. Maximum elimination capacity was about $2.7\;g/m^3$/hr for $NH_3$, > $6.4\;g/m^3$/hr for $H_2S$ and $4.0\;g/m^3$/hr for toluene, respectively. The inorganic/polymeric composite carrier required 40 - 80 days of wetting time for biofilm formation due to the hydrophobic nature of the carrier. Once the surface of the carrier was completely wetted, the microbial activity became stable. During the long-term operation, pressure drop was negligible because the void volume of the carrier was two times higher than the conventional packing materials.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.791-806
• /
• 2020

본 연구에서는 공학목재로 목구조건축에 주로 사용되는 집성재 및 CLT 그리고 Ply-lam CLT의 블록전단시험을 실시하여 강도 및 파괴 유형을 비교 분석하였다. 이를 통해 Ply-lam CLT의 라미나 및 합판의 수종, 접착제의 종류 및 Layer구성 등 최적생산을 위한 제조조건을 구명하고자 하였으며 그 결과는 다음과 같다. 블록전단시험을 통해 집성재, Ply-lam CLT, CLT 순으로 높은 강도를 나타냈다. 특히, 낙엽송 합판과 낙엽송 라미나의 복합구조로 제조되는 Ply-lam CLT의 전단강도는 집성재 전단강도 기준인 7.1 N/㎟을 통과하였다. 아울러 본 연구에서는 집성재, CLT, Ply-lam 접착에 사용된 접착제 종류에 따른 전단강도의 차이는 나타나지 않았다. 그러나 Ply-lam CLT의 경우에는 라미나와 합판의 수종에 따라 Ply-lam CLT의 전단강도의 차이를 나타냈다. 그 결과는 낙엽송 > 남양재 ≒ 육송 합판 순으로 높은 강도를 나타났다. Ply-lam CLT의 최적 구성은 낙엽송 합판과 낙엽송 라미나를 사용하는 경우이며 접착제는 용도에 따라 PRF, PUR을 선정하여 사용하면 될 것으로 판단된다. 목질재료 유형에 따른 전단강도 파괴 양상 결과 분석을 통하여 집성재는 shear parallel-to-grain, CLT는 rolling shear, Ply-lam CLT는 shear parallel-to-grain과 rolling shear가 복합적으로 나타났다. 이는 전단강도 결과와 밀접한 관련이 있으며 rolling shear로 인하여 CLT보다 Ply-lam CLT에서 더 높은 전단 강도를 나타내는 것으로 판단된다.

• 센서학회지
• /
• 제31권5호
• /
• pp.312-317
• /
• 2022

Piezoelectric energy harvesting has attracted increasing attention over the last decade as a means for generating sustainable and long-lasting energy from wasted mechanical energy. To develop self-powered wearable devices, piezoelectric materials should be flexible, stretchable, and bio-eco-friendly. This study proposed the fabrication of stretchable piezoelectric composites via dispersing perovskite-structured BaTiO₃ nanoparticles inside an Ecoflex polymeric matrix. In particular, the stretchable piezoelectric sensor array was fabricated via a simple and cost-effective spin-coating process by exploiting the piezoelectric composite comprising of BaTiO₃ nanoparticles, Ecoflex matrix, and stretchable Ag coated textile electrodes. The fabricated sensor generated an output voltage of ~4.3 V under repeated compressing deformations. Moreover, the piezoelectric sensor array exhibited robust mechanical stability during mechanical pushing of ~5,000 cycles. Finite element method with multiphysics COMSOL simulation program was employed to support the experimental output performance of the fabricated device. Finally, the stretchable piezoelectric sensor array can be used as a self-powered touch sensor that can effectively detect and distinguish mechanical stimuli, such as pressing by a human finger. The fabricated sensor demonstrated potential to be used in a stretchable, lead-free, and scalable piezoelectric sensor array.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.58-66
• /
• 2007

The objective of this research was to develop environment-friendly adhesives for face fancy veneer bonding of engineered flooring. Urea-formaldehyde (UF)-tannin and melamine-formaldehyde (MF)/PVAc hybrid resin were used to replace UF resin in the formaldehyde-based resin system in order to reduce formaldehyde and volatile organic compound (VOC) emissions from the adhesives used between plywoods and fancy veneers. Wattle tannin powder (5 wt%) was added to UF resin and PVAc (30 wt%) to MF resin. These adhesive systems showed better bonding than commercial UF resin with a similar level of wood penetration. The initial adhesion strength was sufficient to be maintained within the optimum initial tack range. The standard formaldehyde emission test (desiccator method) and VOC analyzer were used to determine the formaldehyde and VOC emissions from engineered flooring bonded with commercial UF resin, UF-tannin and MF/PVAc hybrid resin. By desiccator method, the formaldehyde emission level of UF resin showed the highest but was reduced by replacing with UF-tannin and MF/PVAc hybrid resin. MF/PVAc hybrid satisfied the $E_1$ grade (below $1.5mg/{\ell}$). VOC emission results by VOC analyzer were similar with the formaldehyde emission results. TVOC emission was in the following order: UF > UF-tannin > MF/PVAc hybrid resin.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.722-726
• /
• 2008

실리카 microsphere는 HPLC를 위한 흡착 충진제와 같은 용도로 사용하기에 적합한 혁신적인 소재로 널리 알려져 있다. microsphere을 기능성고분자나 금속, 생리활성 물질과 같은 특정한 성질을 지닌 물질로 표면 개질시키므로 다양한 용도로 활용할 수 있다. 콜라겐은 생체조직을 구성하는 기본 단백질로 생체적합성이 뛰어난 물질로 주목받고 있는 기능성 소재이다. 본 연구에서는 50% 이상의 세공부피를 지닌 다공성 silica microsphere를 고분자 응집법인 PICA 법을 이용하여 colloidal silica로부터 제조하고 콜라겐 hydrogel을 사용하여 표면 개질시키므로 생체적합성을 증진시키는 방법을 연구하였다. 실리카/콜라겐 microsphere 에 은 나노입자를 담지시킨 microsphere 복합체를 만들고 특성을 조사하므로 생체소재로의 활용 가능성을 조사하였다.