• Journal of the Korean Wood Science and Technology
• /
• 제46권1호
• /
• pp.73-84
• /
• 2018

최근 들어 늘어나고 있는 도시형 화재 사고와 건축 외장재에 따른 화재 피해 사례의 증가에 따라 난연처리기술의 중요성이 부각되고 있다. 특히, 목재를 기반으로 한 건축재료의 활용에 있어서 난연처리기술은 더욱 중요하게 평가되고 있다. Intumescent 시스템은 비할로겐계 난연처리기술의 하나로, 발포와 탄화층 형성을 통하여 난연성을 구현하는 시스템이다. 본 연구에서는 Intumescent 시스템을 적용하기 위해 Ethylene vinyl acetate (EVA)를 매트릭스로 채용하여 복합재료를 제조하였다. Intumescent 시스템의 난연특성을 강화하기 위해 나노클레이를 함께 적용하였다. Intumescent 시스템과 나노클레이 기술을 함께 적용한 복합재료를 시트상의 시험편으로 가공한 후, 이를 활용하여 표면의 난연특성이 강화된 새로운 구조의 교호집성재를 제작하였다. Intumescent 시스템을 적용한 복합재료의 연소특성 평가에서 최대 열방출량이 효과적으로 감소되는 것을 확인할 수 있었다. 표면에 부착된 구조에 따라 CLT는 두 단계에 걸친 연소 현상이 발생했다. 또한, 심부 연소 과정에서 최대 열방출률이 크게 감소하는 경향을 확인할 수 있었다. 이러한 특성은 목재의 연소과정에 있어 연소 확산지연효과가 있을 것으로 판단된다. 표면단판에 대한 난연처리기술 및 복합재료 적용 최적화 기술을 통해 보다 화재특성이 개선된 CLT 구조체 개발이 가능할 것으로 기대된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제31권1호
• /
• pp.1-6
• /
• 2015

Recently, sericin has attracted increasing attention in biomedical and cosmetic research because of its useful properties including acceleration of wound healing, improvement of cell attachment, and inhibition of ultraviolet-B induced apoptosis. However, sericin films have poor mechanical properties, which restricts the application to those fields. In this study, cellulose nanofibril (CNF)/sericin composite films were fabricated by solvent casting, and the effects of ultrasonication time and CNF content on the solution turbidity, molecular conformation, and film mechanical properties of sericin film were examined. As the ultrasonication time increased, the turbidity of the CNF/sericin suspension decreased. Conversely, as the CNF content increased, the turbidity increased. However, ${\beta}$-sheet crystallization and mechanical properties remained almost unchanged by varying the ultrasonication time and CNF content, indicating that CNF is not effective to improve the mechanical properties of sericin films.

• Composites Research
• /
• 제36권4호
• /
• pp.264-269
• /
• 2023

Spent coffee grounds (SCG) are a ubiquitous byproduct of coffee consumption, representing a significant waste management challenge, as well as an untapped resource for economic development and sustainability. Improper disposal of SCG can result in environmental problems such as methane emissions and leachate production. This study aims to investigate the physicochemical properties of SCG and their potential as a reinforcement material in polypropylene (PP) to fabricate an eco-friendly composite via extrusion and injection molding, with SCG filler ratios ranging from 5-20%. To evaluate the effect of SCG on the morphological and mechanical properties of the bio- composite, thermogravimetric analysis, SEM, tensile, flexural, and impact tests were conducted. The results demonstrated that the addition of SCG lead to a slight increase in brittleness of the composite but did not significantly affect its mechanical properties. Impressively, the presence of a significant organic component in SCG contributed to the enhanced thermal performance of PP/SCG composites. This improvement was evident in terms of increased thermal stability, delayed onset of degradation, and higher maximum degradation temperature as compared to pure PP. These findings suggest that SCG has potential as a filler material for PP composites, with the ability to enhance the material's properties without compromising overall performance.

• 접착 및 계면
• /
• 제18권2호
• /
• pp.59-67
• /
• 2017

스마트 모바일 산업의 성장에 따라 부품의 집적화가 가속화 되고 있다. 이러한 부품의 집적화는 부품간의 간섭현상문제를 야기했으며, 이를 해결하기 위한 전자파 차폐 기술의 중요성이 부각되고 있다. 전자파 차폐 기술은 전자파를 반사하거나 흡수하는 방식으로 구현되며, 일반적으로 전도성물질이 전자파 차폐에 활용된다. 최근 산업의 변화에 따라 투명 차폐기술이 요구되고 있으며, 본 연구에서는 임프린팅 기술을 활용한 음각 구조 패턴에 전도성 복합 바인더를 충진 하여 투명 차폐소재를 제안하고자 하였다. 전도성 복합 바인더를 제조하기 위하여 UV 중합 아크릴 바인더를 활용하고 전도성 부여를 위해 구상, 판상 및 적층상의 은 입자를 활용하였다. 은 입자의 구조적인 특징에 따라 경화특성, 전도성 그리고 접착력의 변화를 확인하였다. 경화과정에서는 구상 입자의 활용이 가장 효율적이었으며, UV에 취약한 구조를 보완할 추가적인 경화 시스템이 요구되었다. 전도성평가에서는 적층상 구조가 우수한 특성을 보였다. 접착력은 구상이 가장 우수한 특성을 보였으며, 표면에서의 불규칙성에 따른 결과로 평가된다. 최종적으로 이를 활용한 패턴필름은 우수한 투명특성을 보여주었다.

• Composites Research
• /
• 제35권1호
• /
• pp.1-7
• /
• 2022

The activated carbon is a very good choice for using as supercapacitor electrode materials. Herein, the flower of Shorea robusta, a bio-waste material was successfully used to synthesize the activated carbons for application as supercapacitor electrode materials. The activated carbon was synthesized through chemical activation process followed by thermal treatment at 700℃ in presence of N₂ atmosphere using KOH, ZnCl₂ and H₃PO₄ as the activating agents. The physicochemical analyses demonstrate that the obtained activated carbons are graphitic in nature and the degree of disorder of the graphitic carbons is changed with the activating agents. The activated carbon obtained from Shorea robusta flower (ACSF-K) electrode shows the specific capacitance of ~610 F g^-1 at 2 A g^-1 current density, which is higher than ACSF-Z (560 F g^-1) and ACSF-H (470 F g^-1) electrode material under the identical current density. The synthesized graphitic carbons also demonstrated good rate capability and high electrochemical stability as supercapacitor electrode.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.24-37
• /
• 2007

The Korean Ministry of Environment started controlling indoor air quality (IAQ) in 2004 through the introduction of a law regulating the use of pollutant emitting building materials. The use of materials with formaldehyde emission levels above $1.25 mg/m^2{\cdot}h$ (JIS A 1901, small chamber method) has been prohibited. This level is equivalent to the $E_2$ grade ($>5.0mg/{\ell}$) of the desiccator method (JIS A 1460). However, the $20{\ell}$ small chamber method requires a 7-day test time to obtain the formaldehyde and volatile organic compound (VOC) emission results from solid building interior materials. As a approach to significantly reduce the test time, the field and laboratory emission cell (FLEC) has been proposed in Europe with a total test time less than one hour. This paper assesses the reproducibility of testing formaldehyde and TVOC emissions from wood-based composites such as medium density fiberboard (MDF), laminate flooring, and engineered flooring using three methods: desiccator, perforator and FLEC. According to the desiccator and perforator standards, the formaldehyde emission level of each flooring was ${\le}E_1$ grade. The formaldehyde emission of MDF was $3.48 mg/{\ell}$ by the desiccator method and 8.57 g/100 g by the perforator method. To determine the formaldehyde emission, the peak areas of each wood-based composite were calculated from aldehyde chromatograms obtained using the FLEC method. Formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde and benzaldehyde were detected as aldehyde compounds. The experimental results indicated that MDF emitted chloroform, benzene, trichloroethylene, toluene, ethylbenzene, m,p-xy-lene, styrene, and o-xylene. MDF emitted significantly greater amounts of VOCs than the floorings did.

• 분석과학
• /
• 제29권1호
• /
• pp.35-42
• /
• 2016

A new nano-composite carbon ink for the development of disposable dopamine (DA) biosensors based on screen-printed carbon electrodes (SPCEs) is introduced. The method developed uses SPCEs coupled with a tyrosinase modified nano-composite carbon ink. The ink was prepared by an “in-house” procedure with reduced graphene oxide (rGO), Pt nanoparticles (PtNP), and carbon materials such as carbon black and graphite. The rGO-PtNP carbon composite ink was used to print the working electrodes of the SPCEs and the reference counter electrodes were printed by using a commercial Ag/AgCl ink. After the construction of nano-composite SPCEs, tyrosinase was immobilized onto the working electrodes by using a biocompatible matrix, chitosan. The composite of nano-materials was characterized by X-ray photoelectron spectroscopy (XPS) and the performance characteristics of the sensors were evaluated by using voltammetric and amperometric techniques. The cyclic voltammetry results indicated that the sensors prepared with the rGO-PtNP-carbon composite ink revealed a significant improvement in electro-catalytic activity to DA compared with the results obtained from bare or only PtNP embedded carbon inks. Optimum experimental parameters such as pH and operating potential were evaluated and calibration curves for dopamine were constructed with the results obtained from a series of amperometric detections at −0.1 V vs. Ag/AgCl. The limit of detection was found to be 14 nM in a linear range of 10 nM to 100 µM of DA, and the sensor’s sensitivity was calculated to be 0.4 µAµM⁻¹cm⁻².

• Journal of the Korean Wood Science and Technology
• /
• 제30권1호
• /
• pp.1-10
• /
• 2002

제지 공정중에서 발생하는 슬러지의 효율적인 활용 방안중의 하나로써 목질보드 원료 대체 재료로써의 그 가능성을 평가하기 위하여 제지 슬러지, 합성 섬유, 목섬유의 혼합비를 각각 5:5:90, 15:15:70, 25:25:50으로 PMDI와 요소수지 접착제를 사용하여 목표비중 0.7, 0.8, 0.9인 복합재를 제작하여 물리적 및 기계적 성질을 측정한 결과 제지 슬러지와 합성 섬유를 30%~50%를 혼합하여 복합재를 제조하여도 기존의 보드와 비교하여 손색이 없는 제품을 생산할 수 있다고 판단되었다.

• 접착 및 계면
• /
• 제20권3호
• /
• pp.110-115
• /
• 2019

그래핀으로 박리시키기 위한 한 가지 방법으로 산화그래핀이 많은 관심이 집중되고 있다. 산화그래핀의 산화그룹은 다양한 기능기와 수소결합을 시킬 수 있어 여러 응용분야에 이를 적용시키기 위한 연구가 활발히 진행되고 있다. 하지만 산화그래핀 자체만으로는 실질적으로 응용에 요구되어지는 기계적 물성을 만족시킬 수 없다. 따라서 본 연구에서는 홍합 단백질을 생체모사한 폴리도파민을 이용하여 산화그래핀과 결합시키고 액체-기체 계면에서 대면적의 복합체막을 형성 시켰다. 또한 폴리도파민-산화그래핀 복합체 박막의 모폴로지 구조도 제어하여 나노 링클 구조를 가지는 복합체 막을 얻었다. 기계적으로 우수하며 정교한 나노 구조를 형성할 수 있어 차세대 해수담수화 멤브레인 또는 탄소 복합재료에 이용될 수 있을 것으로 기대될 수 있다.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.66-71
• /
• 2011

Biocomposites were fabricated with biodegradable polymers and natural fibers. Biocomposites have benefits of low cost, low density, and biodegradability over inorganic fiber composite, and give comparable strength properties. Hydrophobic polymer used for sizing in paper industry, AKD (Akenyl Keten Dimer), was applied to natural fibers, red algae fibers (RAF) in this study, to make fiber surfaces more compatible to hydrophobic nature of matrix polymers. Composites with RAF, kenaf, glass fibers, and carbon fibers have been fabricated by a compression molding method and their thermo-mechanical properties have been studied. Also, the thermal dimensional stability test was done from at 30 to $100^{\circ}C$. The storage moduli and the thermo-mechanical stabilities of polypropylene and poly lactic acid based biocomposites were improved by reinforcing with the RAF and much more with AKD treated fibers. Dimensional stability of biocomposite was also markedly improved by AKD pretrement on RAF.