• Journal of the Korean Chemical Society
• /
• v.56 no.5
• /
• pp.571-576
• /
• 2012

A sol-gel derived carbon composite electrodes (CCEs) were fabricated by mixing horseradish peroxidase (HRP), sol of tetraethoxysilane (TESO), and graphite powder. The HRP solution was added to the sol solution of TEOS, and then graphite powder was added to this mixture. The resulting carbon ceramic network effectively encapsulated HRP and shows a catalytic reduction starting at -0.2 V for $H_2O_2$. The optimum conditions for $H_2O_2$determination have been characterized with respect to the enzyme loading ratio and pH. The linear range and detection limit of $H_2O_2$ detection were from 0.2 mM to 2.2 mM and 0.035 mM, respectively. The common electroactive interferences such as ascorbic acid, acetaminophene, and uric acid were not affected upon the response to $H_2O_2$ at the HRP biosensor due to low detection potential.

• Journal of the Korean Magnetics Society
• /
• v.23 no.3
• /
• pp.98-103
• /
• 2013

The magnetic easy axis of the ferromagnetic layer for the dual-type GMR-SV (giant magnetoresistance-spin valve) having NiFe/Cu/NiFe/IrMn/NiFe/Cu/NiFe multuilayer structure controlled by the post annealing treatment. The magnetoresistive curves of a dual-type IrMn based GMR-SV depending on the direction of the magnetic easy axis of the free and the pinned layers are measured by the different angles for the applied fields. By investigating the switching process of magnetization for an arbitrary measuring direction, the optimum annealing temperature having a steady and isotropy magnetic sensitivity of 2.0 %/Oe was $105^{\circ}C$. This result suggests that the in-plane orthogonal magnetization for the dual-type GMR-SV film can be used by a high sensitive biosensor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.173-179
• /
• 2017

Advanced countries, animal wastes are produced using bioenergy and methane gas technology. In Korea, many researches are being actively carried out to develop livestock manure as a resource technology rather than a animal waste. However, the production of bio-gas using livestock manure is still in the process of development of functional livestock and compost because of low economic efficiency with livestock manure recycling technology. In this paper, in order to accurately estimate the manure output, It will calculate the manure excretion if you have finished input the number of pigs. In addition, we simulated the fertilization rate of three elements of NPK fertilizer per 100 square meters automatically.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.227-232
• /
• 2006

스마트 의류의 발달은 pc 를 분산, 부착한 웨어러블 컴퓨터의 연구로부터 진행되어 왔으며, 1990 년대 후반 이후 착용자 감성을 고려해 더욱 편안하며, 의복과 유사한 외관을 디자인 하려는 노력이 전개되고 있다. 스마트 의류는 엔터테인먼트, 비즈니스, 스포츠, 의료 분야에 적용 등 다양한 애플리케이션으로 연구, 개발되고 있으며, 최근 들어서는 생체신호 센서를 이용한 건강관리용 스마트 의류의 연구가 주목 받고 있다. 건강에 대한 관심과 라이프 스타일의 변화, 고령화 사회의 예상으로 인해 건강복지에 대한 필요성이 증가하는 최근 트렌드를 볼 때, 건강 관리용의 스마트 의류의 수요는 증가될 것으로 예상된다. 이에 본 연구에서는 기본적인 생체신호 뿐 아니라 심장 질환, 호흡기 질환을 측정할 수 있는 건강 개념의 스마트 의류 디자인을 개발하였다. 이 스마트 의류는 기존의 의복의 형태와 착용감은 그대로 유지하면서 의복 착장 시 생체 신호를 전송, 모니터링 할 수 있도록 설계하였다. 개발된 의복은 심전도, 체온 센서로 구성되어 있으며, 이를 통해 심전도, 호흡량, 맥박, 체온 등의 생체신호를 얻을 수 있다. 디자인 프로토타입의 기기 위치 선정은 선행 연구에서 제시한 '착용성 향상을 위한 웨어러블 컴퓨터 디자인 지침' 을 기반으로 설계하여 착장 시 기기로 인한 이물감이 느껴지지 않도록 하였으며 또한, 기기의 하중을 최소화 하였다. 의복의 디자인은 센서의 안정된 부착과 활동성, 센서의 정확한 측정을 고려하여 표피의 면적 변화를 고찰하여 디자인하였다. 이 스마트 의류는 노인, 건강 이상자, 통원 치료자에게 평상시의 건강을 체크 함으로써 보다 원활한 치료의 가능으로 의료 복지에 기여할 것으로 예상되며, 디자인 프로토타입의 개발을 통하여 센서기반 스마트 의류의 가능성을 제시했다는 점에서 이 연구의 의의가 있다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1246-1247
• /
• 2008

With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. Therefore, in other to made piezoelectric energy harvesting device, PMN-PZT thick film was formed by the screen printing method on the Ag/Pd coated alumina substrate. The layer was 8 layers and slurry where a-terpineol, ethycellulose, ferro B-75001 as Vehicle, PMN-PZT powder used are fabricated by ball mill. The output power quality was be also investigated by changing the load resistance, weight and frequency. The made piezoelectric energy harvesting device was resulted from the conditions of 33$k{\Omega}$, 0.25g, 197Hz respectively. The thick film was prepared at the condition of 2.75Vrms, and its power was 230${\mu} W$ and its thickness was 56${mu}m$. The piezoelectric energy harvesting device output voltage was increased, when the load weight, load resistance was increasing and resonance frequency was diminishing. The other side, resonance frequency was diminished, when the weight was increasing. And output power was continuously it changed by load resistance, output voltage, weight and resonance frequency.

• Journal of the Society of Disaster Information
• /
• v.10 no.3
• /
• pp.374-387
• /
• 2014

Since the sexual violence crime has a high probability of repeated crime, the electronic monitoring system has been introduced as a measure to it. And this system allows the police to know the location of former criminal around the clock through the electronic device, the former criminal has the psychological/mental oppression which can restrain the intention of crime to a degree. However, there is a limit in blocking criminals with strong will from repeated crime. The next-generation intelligent electronic anklet currently under study collects and analyzes the change bio-data in real time through the location information of electronic monitoring target and attached sensor. This study is aimed to predict the symptom of crime occurrence in advance based on this and block the crime intention in advance or stop the ongoing crime before it is expanded.

• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.314-323
• /
• 2017

Indicators to quantitatively evaluate the body function may help to optimize the effectiveness of rehabilitation therapy for stroke patients. In this study, we analyzed the body composition in the paretic and nonparetic regions of stroke patients with hemiplegia caused by cerebral hemorrhage (7 cases) and cerebral infarction (13 cases) using multifrequency bioelectrical impedance. Specifically, we considered fat mass (FM), fat-free mass (FFM), FFMI index (FFMI), FM/FFM relation, body cell mass (BCM), basal metabolic rate (BMR), and BMR/FFM relation to evaluate the bodily function in the paretic and nonparetic regions. These values showed considerable differences according to grades determined by the stroke causes and the paralysis status. In the paretic regions, the FFM, FFMI, BCM, and BMR were low and the FM was high. In contrast, the nonparetic regions showed a high FFM and low FM. Furthermore, the paretic and nonparetic regions of all patients suitably fit a linear relation (slope: 22.17 kcal/day/kg) between BMR and FFM. Therefore, bio-electrical impedance measurements can be very useful to quantitatively assess paretic and nonparetic regions in hemiplegic stroke patients.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.5
• /
• pp.398-404
• /
• 2014

Salt stress is one of the major abiotic stresses affecting the yield of ginseng (Panax ginseng C. A. Meyer). The objective of this study was to identify bio-marker, which is early responsive in salt stress in ginseng, using proteomics approach. Ginseng plants were exposed to 5 ds/m salt concentration and samples were harvested at 0, 6, 12 and 18 hours after exposure. Total proteins were extracted from ginseng leaves treated with salt stress using Mg/NP-40 buffer and were separated on high resolution 2-DE. Approximately $1003{\pm}240$ (0 h), $992{\pm}166$ (6 h), $1051{\pm}51$ (12 h) and $990{\pm}160$ (18 h) spots were detected in colloidal CBB stained 2D maps. Among these, 8 spots were differentially expressed and were identified by using MALDI-TOF/TOF MS or/and LC-MS/MS. Ethylene response sensor-1 (spot GL 1), nucleotide binding protein (spot GL 2), carbonic anhydrase-1 (spot GL 3), thylakoid lumenal 17.9 kDa protein (spot GL 4) and Chlorophyll a/b binding protein (spot GL 5, GL 6) were up-regulated at the 12 and 18 hour, while RuBisCO activase B (spot GL 7) and DNA helicase (spot GL 8) were down-regulated. Thus, we suggest that these proteins might participate in the early response to salt stress in ginseng leaves.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.163-170
• /
• 2011

Analysis of load on major parts of the tractor power drive line is critical for efficient and optimum design of a tractor. The purpose of this study was to evaluate severeness of the tractor PTO driving axle during rotary tillage operation. First, S-N (stress vs. number of cycle) curve of a PTO driving gear was obtained through the fatigue life test using a PTO dynamometer. Second, PTO severeness was evaluated during rotary tillage operation. Torque measurement system was constructed with strain-gauge sensors to measure torque of a PTO axle, an I/O interface to acquire the sensor signals, and an embedded system to calculate severeness. The severeness of PTO was analyzed using measured torque data during rotary tillage. In the PTO gear life fatigue test, breakage time and bending stress of the gear were measured by tooth widths and torque change during the fatigue life test. The S-N curve showed a good linear relationship between bending stress and number of cycle (life) with a coefficient of determination of 0.97. For PTO severenss evaluation, rotary tillage operations were conducted at two PTO rotational speeds (level-1, level-2) under different paddy and upland field sites with different soil conditions. Results of averaged relative severeness for PTO level-1 and PTO level-2 were 1.96 and 3.34, respectively, at paddy field sites, and they were 1.36 and 2.51, respectively, at upland field sites. The results showed that the PTO driving axle experienced more severe load during rotary tillage at paddy fields than at upland sites, and relative severeness was greater at the higher PTO rotational speed under all of the soil conditions.

• Journal of Sensor Science and Technology
• /
• v.20 no.1
• /
• pp.19-24
• /
• 2011

Brain disorders such as epilepsy is a condition that affects an estimated 2.7 million Americans, 50,000,000 worldwide, approximately 200,000 new cases of epilepsy are diagnosed each year. Of the major chronic medical conditions, epilepsy is among the least understood. Scientists are conducting research to determine appropriate treatments, such as the use of drugs, vagus nerve stimulation, brain stimulation, and Peltier chip-based focal cooling. However, brain stimulation and Peltier chip-based stimulation processes cannot effectively stop seizures. This paper presents simulation of a novel heat enchanger network(HEN) technique designed to stop seizures by using a neural cooling probe to stop focal and spontaneous seizures by cooling the brain. The designed probe was composed of a U-shaped tube through which cold fluid flowed in order to reduce the temperature of the brain. The simulation results demonstrated that the neural probe could cool a 7 $mm^2$ area of the brain when the fluid was flowing atb a velocity of 0.55 m/s. It also showed that the neural cooling probe required 23 % less energy to produce cooling when compared to the Peltier chip-based cooling system.