• Analytical Science and Technology
• /
• v.25 no.1
• /
• pp.33-38
• /
• 2012

Despite the importance of chloride binding, it is very difficult to measure the binding capacity, in particular, for the concrete body in an existing structure: in fact, the measurement procedure for chloride binding is much influenced by the environmental condition such as temperature, fineness of sample and pore water extraction techniques. The present study concerns the quantification of the binding capacity of chloride ions in concrete using the X-ray diffraction (XRD) technique. Once the binding isotherm of chlorides was determined by the Langmuir isotherm, as a function of the W/C, curing age and binder type, the generation of bound chlorides (i.e. Friedel's salt) was simultaneously ensured by the XRD technique. The amount of bound chloride was then determined by analyzing the peak intensity for the bound chlorides in the XRD curve. It was found that an increase in the curing age and a decrease in the W/C resulted in an increase in the binding capacity.

• The Korean Journal of Nuclear Medicine
• /
• v.7 no.2
• /
• pp.1-12
• /
• 1973

The most commonly used methods for determining thyroxine binding globulin(TBG) concentration as the total thyroxine-binding capacity utilize electrophoretic seperation of serum. Although technically simple, the electrophoretic method is time consuming and is limited in the number of samples which can be run in a single assay. The author presented a single $T_4$ load ion exchange resin method as an approach to simplify the technique as with clinical practicability and results were analyzed. For construction of the standard curves, serum mixtures were diluted with barbital buffer.which effectively blocked $T_4$-binding to TBPA. For each serum dilution, a constant amount of $T_4-^{125}I$ and increments of unlabelled $T_4$ were added. After incubation in water bath, resin beads were dispensed to the samples which binded all $T_4$ not bound to TBG. The radioactivity in the supernatant was counted in the gamma scintillation counter. Each standard curve was plotted from the percent counts in the supernatant and total $T_4$ in each tube. Unknown samples were diluted to 1:40 and ran at a single $T_4$ loading concentration, and the TBG capacity of the samples was able to be read on the standard isobars. The following results were obtained. 1) Mean and standard deviation for TBG capacity in normal population was $28.6{\pm}5.09{\mu}g\;T_4/100ml$. 2) $24.9{\pm}3.87{\mu}g\;T_4/100ml$ in hyperthyroidism showed low TBG capacity comparing to normal population.(p<0.025) 3) $31.0{\pm}2.40{\mu}g\;T_4/100ml$ in hypothyroidism showed high TBG capacity tendency comparing to normal population. 4) Reversed correlationship existed between TBG capacity and $T_3$ resin uptake(r=-0.624), TBG capacity and serum $T_4$ value (r=-0.859), and TBG capacity and free thyroxine index(r=-0.623). The author assumes that this method of assay is considerably simpler in instrumentation and technique than any other assays traditionally being used, and seems to be more practical for routine clinical laboratory use.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2002.11a
• /
• pp.57.1-57
• /
• 2002

• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.81-88
• /
• 2009

Chloride induced corrosion of steel reinforcement inside concrete is a major concern for concrete structures exposed to a marine environment. It is well known that transport of chloride ions in concrete occurs mainly through ionic/molecular diffusion, as a gradient of chloride concentration in the concrete pore solution is set. In the process of chloride transport, a portion of chlorides are bound in cement matrix then to be removed in the pore solution, and thus only the rest of chlorides which are not bound (i.e. free chlorides) leads the ingress of chlorides. However, since the measurement of free/bound chloride content is much susceptible to environmental conditions, chloride profiles expressed in total chlorides are evaluated to use in many studies In this study, the capacity of chloride binding in cement matrix was monitored for 150 days and then quantified using the Langmuir isotherm to determine the portions of free chlorides and bound chlorides at given total chlorides and the redistribution of free chlorides. Then, the diffusion of chloride ion in concrete was modeled by considering the binding capacity for the prediction of chloride profiles with the redistribution. The predicted chloride profiles were compared to those obtained from conventional model. It was found that the prediction of chloride profiles obtained by the model has shown slower diffusion than those by the conventional ones. This reflects that the prediction by total chloride may overestimate the ingress of chlorides by neglecting the redistribution of free chlorides caused by the binding capacity of cement matrix. From the evaluation, it is also shown that the service life prediction using the free chloride redistribution model needs different expression for the chloride threshold level which is expressed by the total chlorides in the conventional diffusion model.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.5
• /
• pp.359-365
• /
• 2004

To study the lipid adsorption characteristic of chitosans with different molecular weights and the degrees of deacetylation, in vitro test and near-infrared (NIR) spectroscopic analysis have been performed for the measurement of lipid adsorption characteristics of chitosan. The degrees of deacetylation in chitosans were $70{\%},\;85{\%}\;and\;92{\%}$ at different deacetylation times (1 hr, 2 hrs, 3 hrs), respectively. The molecular weight of each chitosan was controlled by enzymatic hydrolysis, and then the molecular weight of the chitosan was 4 kDa. The bulk density, water holding capacity and fat binding capacity of each chitosan powder were $96.2-504.0{\%},\;374.4-1217.9{\%},\;and\;307.0-659.3{\%}$, respectively. The higher molecular weight of chitosan was exhibited the lower bulk density and the higher water and fat binding capacities. Bindinf capacities of chitosan powders to bile salts, cholesterol and linoleic acid were $41.2-63.3{\%},\;40.8-67.4{\%},\;42.6-72.6{\%}$, respectively. In NIR spectrum of lipid adsorbed chitosan the occurrence static eletronical binding between chitosan and lipid was identified by NIR spectrum peak induced from combination of carboxylic group in lipid and amino group in chitosan. In conclusion, the higher degree of deacetylation and molecular weight of chitosan showed the higher lipid binding capacity and the lipid adsorption of chitosan were occurred by combination of carboxylic group in lipids and amino group in chitosan.

• Archives of Pharmacal Research
• /
• v.27 no.9
• /
• pp.978-983
• /
• 2004

The effects of glycyrrhizic acid (GLZ) on protein binding of diltiazem, verapamil, and nifedipine were investigated. Protein binding studies (human serum, human serum albumin (HSA) and (X1-acid glycoprotein (AAG)) were conducted using the equilibrium dialysis method with and without addition of GLZ. The binding parameters, such as the number of moles of bound drug per mole of protein, the number of binding sites per protein molecule, and the association con-stant, were estimated using the Scatchard plot. The serum binding of nifedipine, verapamil, and diltiazem was displaced with addition of GLZ, and the decreases of Ks for serum were observed. GLZ decreased the association constants of three drugs for HSA and AAG, while the binding capacity remained similar with addition of GLZ. Although the characteristics of interaction were not clear, GLZ seemed to mainly affect HSA binding of nifedipine rather than AAG binding, while GLZ seemed to affect both AAG- and HSA-bindings of verapamil and dilt-iazem resulting in a serum binding displacement.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.995-1002
• /
• 2000

In order to Develop a low Na functional kimchi using sea tangle, the Na-binding capacity of alginate in sea tangle along with other dietary fibers was evaluated in vitro. The adding type and amount of the sea tangle that contains alginate in kimhi and characteristics of the sea tangle added kimchi were also studied. Na-binding capacity of various dietary fibers such as cellulose, pectin, gun gum, carageenan, alginates (sodium alginate, alginate, alginate from sea tangle) was measured by equilibrium dialysis method in pH 2 and pH 7 in vitro. Gua gum, carageenan and a group of alginates effectively bound to Na+ Espacially sodium alginate showed high Na-binding capacity of 29.2% in pH of stomach (pH 2.0) and 33.8% in pH of small intestine (pH 7.0), however, the alginate extracted from sea tangle could not bind Na in PH of stomach (pH 2.0), but 27.4% in pH of small intestine (pH 7.0) condition. The content of alginate in sea tangles (dried sea tangle, salted sea tangle and washed salted sea tangle) was 19.8 ~ 22.2% on dry matter basis. The sea tangle added kimchi was prepared with the addition of the flake type (0.5$\times$3 cm) of sea tangle with a quantity of 30% in kimchi from the data of the sensory analysis. The addition of the sea tangle to the kimchi increased the content of soluble dietary fiber, suggesting the Na-binding capacity increased. The sea tangle added kimchi (SK) and sea tangle and fermented anchovy added kimchi (SAK) showed higher levels of reducing sugar and acidity than the control kimchi (CK). In quantitative descriptive analysis (QDA) SK and SAK showed higher score in overall acceptance, and lower score in acidic order than CK, however, SK showed less moldy taste and more fresh acidic taste than SAK.

• Journal of Nutrition and Health
• /
• v.3 no.3
• /
• pp.141-147
• /
• 1970

Nutritional anemias are an important nutritional problem affecting large population groups in most developing countries. Many reports on investigations of nutritional anemias have been published and there is good evidence that prevalence of iron deficiency anemias in vulnerable groups is high in many areas of the world. However, there is a general lack of accurate data on its prevalence throughout the world. Methods used to measure different factors have been variable and often of poor quality. Furthermore recent comparison of values obtained in different laboratories have shown a much greater discrepancy in iron binding capacity measurements as compared with serum iron determinations. Since the major cause of these differences appears related to the technique employed, the efforts of the central laboratory will be directed initially to standardization of methodology. My laboratory has been joined interlaboratory comparison of WHO studies of iron standardization. The determination of serum iron, iron-binding capacity and transferrin saturation was done on healthy adults, 79 males and 20 females, who visited hospital for health certificate from January to July 1970. The serum iron was determined by the method of modification of Bothwell and Mallett and total iron blinding capacity by Ramsay method and Bothwell and Mallett method. The results of this study are as follows; 1) The serum iron concentration of seventy nine adult male by the method presented is $131.5{\pm}37.3{\mu}g/100ml\;(range\;52.5{\sim}225.0{\mu}g/100ml)$ and of twenty female adult is $108.5{\pm}40.2{\mu}g/100ml\;(range\;45.0{\sim}202.5{\mu}g/100ml)$. 2) The adult male level of serum iron-binding capacity is $330.9{\pm}48.9{\mu}g/100ml\;and\;adult\;female\;is\;291.2{\pm}55.2{\mu}g/100ml$. 3) The transferring saturation of healthy male is $35.6{\pm}12.8%\;(range\;15.1{\sim}18.0%)\;and\;of\;female\;as\;25.4{\pm}12.4%\;(range\;10.1{\sim}60.0)$.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1073-1077
• /
• 2002

Binding of dodecyl trimethylammonium bromide (DTAB) to human and bovine hemoglobin and globin samples has been investigated in 50 mM glycine buffer pH = 10, I = 0.0318 and 300 K by equilibrium dialysis and temperature scanning spectrophotometry techniques and method for calculation of average hydrophobicity. The binding data has been analyzed, in terms of binding capacity concept $({\theta})$, Hill coefficient (nH) and intrinsic Gibbs free energy of binding $({\Delta}Gbv).$ The results of binding data, melting point (Tm) and average hydrophobicity show that human hemoglobin has more structural stability than bovine hemoglobin sample. Moreover the results of binding data analysis represent the systems with two and one sets of binding sites for hemoglobin and globin, respectively. It seems that the destabilization of hemoglobin structure due to removal of heme group, is responsible of such behavior. The results indicating the removal of heme group from hemoglobin caused the depletion of first binding set as an electrostatic site upon interaction with DTAB and exposing the hydrophobic patches for protein.

• Journal of Pharmaceutical Investigation
• /
• v.6 no.1
• /
• pp.14-17
• /
• 1976

Binding of nalidixic acid with plasma of male and female rats, dogs, and rabbits was studied in vitro using the method of equilibrium dialysis in 1/15 mole phosphate buffer (pH 7.4). Rat plasma had the most extensive binding capacity followed by dog and rabbit plasma, and the plasma of female had more extensive capability than male in rat and rabbit but it was reversed in dog.