• 대한전자공학회논문지SP
• /
• 제41권1호
• /
• pp.29-36
• /
• 2004

웨이블릿 영역은 일반적으로 신호 성분을 많이 포함하는 큰 계수와 신호 성분이 작은 크기의 계수로 나누어 질 수 있다. 이러한 웨이블릿 계수의 통계적 특성을 가우스 혼합 모델로 설정하고, 잡음 제거에 응용하는 것은 효율적이다. 본 논문에서는 웨이블릿 계수의 혼합 모델링을 이용하여 영상의 잡음 제거 방법을 제안한다. 적절한 문턱값을 이용하여 웨이블릿 계수를 두영역으로 분리하여 이진 마스크를 생성하고, 생성된 마스크의 정보는 잡음 제거에 효율적으로 사용된다 또한 생성된 마스크의 정보를 형태학적 필터를 이용하여 보다 정확히 추정하고 이를 이용하여 제안한 잡음 제거 방법의 성능을 높이는 방법을 제안한다. 모의실험 결과를 통하여 제안 방법이 최신 잡음 제거 방법보다 우수한 PSNR을 나타낸다는 것을 보여 준다.

• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.78-84
• /
• 2008

Heat pipes are considered to be promising candidates to enhance the heat transport capability of evacuated solar collectors in a wide temperature range. The working fluid must be selected properly considering various operating conditions of heat pipes for medium-high temperature range to avoid dry-out, local overheating, and frozen failure. The advantage of using binary mixture as heat pipe working fluid is that it can extend operating temperature range of the system as it can overcome operating temperature limit of a single fluid. Various operating temperature ranges were imposed in the experiments to simulate the actual operation of solar collectors using water-ethanol binary mixture. Tests were conducted for the coolant temperature range of -10$^{\circ}C$ to 120$^{\circ}C$, and mixing ratio range was from 0 to 1 based on mass fraction.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2760-2770
• /
• 2020

A model for calculation of fuel temperature profile using binary gas mixture of Helium and Xenon for gap gas conductance is proposed here. In this model, the temperature profile of a fuel pencil from fuel centreline to fuel surface has been calculated by taking into account the dilution of Helium gas filled during fuel manufacturing due to accumulation of fission gas Xenon. In this model an explicit calculation of gap gas conductance of binary gas mixture of Helium and Xenon has been carried out. A computer code Fuel Characteristics Calculator (FCCAL) is developed for the model. The phenomena modelled by FCCAL takes into account heat conduction through the fuel pellet, heat transfer from pellet surface to the cladding through the gap gas and heat transfer from cladding to coolant. The binary noble gas mixture model used in FCCAL is an improvement over the parametric model of Lassmann and Pazdera. The results obtained from the code FCCAL is used for fuel temperature calculation in 3-D neutron diffusion solver for the coolant outlet temperature of the core at steady operation at full power. It is found that there is an improvement in calculation time without compromising accuracy with FCCAL.

• 한국분무공학회지
• /
• 제26권4호
• /
• pp.212-218
• /
• 2021

The present study aims to develop the Surface Plasmon Resonance (SPR) imaging system facilitating the real-time measurement of the concentration of evaporating binary mixture droplet (BMD). We introduce the theoretical background of the SPR imaging technique and its methodology for concentration measurement. The SPR imaging system established in the present study consists of a LED light source, a polarizer, a lens, and a band pass filter for the collimated light of a 589 nm wavelength, and a CCD camera. Based on the Fresnel multiple-layer reflection theory, SPR imaging can capture the change of refractive index of evaporating BMD. For example, the present study exhibits the visualization process of ethylene glycol (EG)-water (W) BMD and measures real-time concentration change. Since the water component is more volatile than the ethylene glycol component, the refractive index of EG-W BMD varies with its mixture composition during BMD evaporation. We successfully measured the ethylene glycol concentration within the evaporating BMD by using SPR imaging.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1125-1126
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.459-460
• /
• 2009

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권4호
• /
• pp.197-202
• /
• 2013

Large gains in speech intelligibility can be obtained using the SNR-based binary mask approach. This approach retains the time-frequency (T-F) units of the mixture signal, where the target signal is stronger than the interference noise (masker) (e.g., SNR > 0 dB), and removes the T-F units, where the interfering noise is dominant. This paper introduces two alternative binary masks based on the distortion constraints to improve the speech intelligibility. The distortion constraints are induced by a gain function for estimating the short-time spectral amplitude. One binary mask is designed to retain the speech underestimated (T-F) units while removing the speech overestimated (T-F)units. The other binary mask is designed to retain the noise overestimated (T-F) units while removing noise underestimated (T-F) units. Listening tests with oracle binary masks were conducted to assess the potential of the two binary masks in improving the intelligibility. The results suggested that the two binary masks based on distortion constraints can provide large gains in intelligibility when applied to noise-corrupted speech.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.149-156
• /
• 2018

This paper investigated the influence of binary and ternary blends of mineral admixtures in self-compacted mortar (SCM) on the fresh, mechanical and durability properties. For this purpose, 25 mortar mixtures were prepared having a total binder content of $640kg/cm^3$ and water/binder ratio between 0.41 and 0.50. All the mixtures consisted of Portland cement (PC), fly ash (FA) and silica fume (SF) as binary and ternary blends and air-entrained admixture wasn't used while control mixture contained only PC. The compressive and tensile strength tests were conducted for 28 and 91 days as well as slump-flow and V-funnel time tests whilst freeze-thaw (F-T) resistance and capillary water absorption tests were made for 91-day. Finally, in general, the use of SF with FA as ternary blends improved the tensile strength of mortars at 28- and 91-day while the use of SF15 with FA increased the compressive strength of the mortars compared to binary blends of FA. SCM mixtures with ternary blends had lower the sorptivity values than that of the mortars with binary blends of FA and the control mixture due to the beneficial properties of SF while the use of FA with SF as ternary blends induced the F-T resistance enhancement.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.763-767
• /
• 2010

본 연구에서는 가변부피 투시셀이 장착된 고압 상평형 장치를 사용하여 초임계 용매인 이산화탄소와 1-propanol의 기액 상평형 거동을 관찰하였다. 이산화탄소와 1-propanol 이성분계에 대하여 온도 305.15 K, 313.15 K, 323.15 K, 333.15 K와 압력 2~11 MPa 범위까지의 실험 결과를 압력-조성(P-x)과 압력-온도(P-T)의 평형 곡선으로 나타내었다. 온도가 증가함에 따라서 혼합물 임계압력도 증가하였고 이산화탄소와 1-propanol계 혼합물의 P-T 곡선은 전형적인 type-II의 유형을 나타내었다. Peng-Robinson 상태방정식을 이용하여 실험 결과를 적합하여 결정한 최적 파라미터 값은 각각 $k_{ij}=0.116$와 ${\eta}_{ij}=-0.065$이였으며 Peng-Robinson 상태방정식에 적용하여 계산된 예측치는 실험결과와 비교적 좋은 일치를 보였다.

• 방송공학회논문지
• /
• 제23권4호
• /
• pp.511-518
• /
• 2018

본 논문에서는 잡음 환경의 음성 신호를 시간-주파수 영역으로 분해한 후 0 또는 1로 표현되는 이진 마스크를 적용하여 음성의 명료도를 높이는 방법에 대해 다룬다. 시간-주파수 영역으로 분해된 신호에 대해 상대적으로 잡음이 많이 섞인 경우는 마스크 "0"을 할당하여 제거하고, 그렇지 않은 경우는 마스크 "1"을 할당하여 보존하는 방식을 채택한다. 이러한 이진 마스크의 추정은 가우시안 혼합 모델로 학습된 베이지안 분류기를 사용한다. 가우시안 혼합 모델 학습에 포함된 잡음 환경에 대해서는 학습된 모델을 이용하여 추정된 이진 마스크의 적용을 통해 잡음 환경에서 음성 명료도를 높일 수 있으나 학습에 포함되지 않은 잡음 환경에 대해서는 음성 명료도를 향상시키지 못하는 문제가 있다. 본 논문에서는 이러한 문제를 해결하기 위해 학습 모델을 잡음 환경에 적응시키고자 한다. 새로운 잡음 환경에 대처하고자 음성 인식에서 사용되는 대표적인 화자 적응 방법을 적용하였으며 실험을 통해 새로운 잡음 환경에 적응함을 확인하였다.