• Journal of Korea Water Resources Association
• /
• v.33 no.3
• /
• pp.299-306
• /
• 2000

Korea IS one of countries to be predicted short of water in the 21st century. The government has been investigating various alternatives to resolve the problems including construction of reservoirs. Freshwater retention techniques using boom and skirt system is one of them. It is very difficult to intake water in the estuaries of south and west coast of Korea because a big tide penetrates into an upstream river. Thus, means or retaining and keeping separate freshwater from seawater could potentially be helpful in solving the water supply problems. In this study, the proposed means to achieve freshwater retention is by use of floating boom and skirt systems. The hydraulic viability of these systems in taking advantage of natural stratification tendencies between the fresh and seawaters has been investigated through hydraulic experiments. It is found that freshwater retention capacity depends on skirt length and the opening beneath the skirt. The choice of skirt length IS very important to optimize freshwater storage because longer skirt lengths cause faster mixing and shorter lengths retain less volume. Results show that the freshwater retention volume generally increases as the length of the skirt increases. However, they show that water storage might be insufficient if skirts were either too long or too short.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.292-296
• /
• 2013

Recently, Pleurotus eryngii, King oyster mushroom is the main export item in South Korea mushroom industry. For appropriate transportation to Europe and USA markets, it is necessary to elucidate suitable conditions of storage and treatment of post-harvest during long time shipping. Whole mushrooms were packed with polypropylene anti-fog film (30 um) without trimming. The range of package weight and oxygen permeability of film were 200 g~400 g and 2000~5000 $cc/m^2$, 24 h,atm, respectively. The weight loss ratio was increased with increasing storage time. There were no big differences in weight loss ratio according to package weight and oxygen permeability of film at low temperature storage($4^{\circ}C$). In case of package weight is 400 g and oxygen permeability of film is 3000 $cc/m^2$, 24 h, atm. As a results of freshness, the optimum packing weight and oxygen permeability of film of P. eryngii were 400 g and below 2,000 $cc/m^2$, 24 h, atm, respectively.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.211-216
• /
• 2001

Top synthetic spin valves wi th structure Ta/NiFe/CoFe/Cu/CoFe(Pl)/Ru/CoFe(P2)/FeMn/Ta on Si (100) substrate with SiO$_2$ of 1500 were prepared by dc magnetron sputtering system. We have changed only the thickness of the free layer and the thickness difference (Pl-P2) in the two ferromagnetic layers separated by Ru, and investigated the effect of magnetic film thickness on the GMR properties and the interlayer coupling field in a spin valve with a synthetic antiferromagnet. As thickness difference of pinned layer was decreased from +25 to -25 , MR ratio was decreased gradually. However, there was a dip zone indicating a big change of MR ratio around Pl = P2, which can be due to the large canting of pinned layers. The modified Neel model was suggested for the top synthetic spin valve to explain the interlayer coupling field according to the thickness change of ferromagnetic layers. The interlayer coupling field was decreased due to the magnetostatic coupling (orange peel coupling) as suggested by model. However, the interlayer coupling field was not explained at the dip zone by the modified Neel model. The deviation of modified Neel model at the dip zone could be due to the largely canting of the pinned layers as well, which depends on different thickness in synthetic antiferromagnetic structure.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.312-320
• /
• 2020

Various LIDs with natural water circulation function are applied to reduce urban environmental problems and environmental impact of development projects. However, excessive Infiltration and evaporation of LID facilities dry the LID internal soil, thus reducing plant and microbial activity and reducing environmental re duction ability. The purpose of this study was to develop a real-time measurement system with complex sensors to derive the management plan of LID facilities. The test of measurable sensors and Internet of Things (IoT) application was conducted in artificial wetlands shaped in acrylic boxes. The applied sensors were intended to be built at a low cost considering the distributed LID and were based on Arduino and Raspberry Pi, which are relatively inexpensive and commercialized. In addition, the goal was to develop complex sensor measurements to analyze the current state o f LID facilities and the effects of maintenance and abnormal weather conditions. Sensors are required to measure wind direction, wind speed, rainfall, carbon dioxide, Micro-dust, temperature and humidity, acidity, and location information in real time. Data collection devices, storage server programs, and operation programs for PC and mobile devices were developed to collect, transmit and check the results of measured data from applied sensors. The measurements obtained through each sensor are passed through the Wifi module to the management server and stored on the database server in real time. Analysis of the four-month measurement result values conducted in this study confirmed the stability and applicability of ICT technology application to LID facilities. Real-time measured values are found to be able to utilize big data to evaluate the functions of LID facilities and derive maintenance measures.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.38-46
• /
• 1999

Canopy structure conductances of a Norway spruce forest in the Solling Hills(Central Germany) and Central Forest Biosphere Reserve(320km to the north-west from Moscow) were derived from LE(latent heat flux) and H(sensible heat flux) fluxes measured(by Eddy correlation technique and energy balance method) and modelled(by one dimensional non-steady-state) SVAT(soil-vegetation-atmosphere-transfer) model(SLODSVAT) using a rearranged Penman-Monteith equation("Big-leaf" approximation) during June 1996. They were compared with canopy stomatal conductances estimated by consecutive intergrating the stomatal conductance of individual needles over the whole canopy("bottom-up" approach) using SLODSVAT model. The result indicate a significant difference between the canopy surface conductances derived from measured and modelled fluxes("top-down" approach) and the stomatal conductances modelled by the SLODSVAT("bottom-up" approach). This difference was influenced by some nonphysiological factors within the forest canopy(e.g. aerodynamic and boundary layer resistances, radiation budget, evapotranspiration from the forest understorey). In general, canopy surface conductances derived from measured and modelled fluxes exceeded canopy stomatal conductance during the whole modelled period, The contribution of the understorey's evapotranspiration to the total forest evapotranspiration was small (up to 5-9% of the total LE flux) and was not depended on total radiation balance of forest canopy. Ignoring contribution of the understorey's evapotranspiration resulted in an overestimation of the canopy surface conductance for a spruce forest up to 2mm/s(about 10-15%).

• Korean Journal of Environment and Ecology
• /
• v.7 no.2
• /
• pp.187-191
• /
• 1994

A mixed forest community in Tokyusan was studied to determine the adequate plot area of tree stratum for investigating forest community structure. Nineteen nested plots were set up in the studied forest community, and species-area curve and performance curve were established. According to species-area curve, the minimum plot area where a given percentage increase in plot area produced less than the same percentage increase in number of species was 500$m^2$. The minimum plot area where a given percentage increase in plot area produced less than the half of the percentage increase in number of species was 1,000$m^2$. According to performance curve of the importance values of the major species, the minimum plot area where the importance value of the major species was distinguished from each other was 900$m^2$, and the minimum plot area was 500$m^2$ except for a big tree of Pinus densiflora distributed unexpectedly. According to performance curve of species diversity, the minimum plot area was 400$m^2$. Similarity indices between plot area above 900$m^2$ and total plot area were more than 90% and similarity indices between plot area above 400$m^2$ and total plot area were more than 85%. It may be as a conclusion that minimum plot area was generally about 500$m^2$ and in case of requiring more accuracy, minimum plot area was about 1,000$m^2$.

• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.220-233
• /
• 2017

Traffic volumes are fundamental data widely used in various traffic analysis, such as origin-and-destination establishment, total traveled kilometer distance calculation, congestion evaluation, and so on. The low number of links collecting the traffic-volume data in a large urban highway network has weakened the quality of the analyses in practice. This study proposes a method to estimate the traffic volume data on a highway link where no collection device is available by introducing a spatial statistic technique with (1) the traffic-volume data from TOPIS, and National Transport Information Center in the Ministry of Land, Infrastructure, and (2) the navigation data from private navigation. Two different component models were prepared for the interrupted and the uninterrupted flows respectively, due to their different traffic-flow characteristics: the piecewise constant function and the regression kriging. The comparison of the traffic volumes estimated by the proposed method against the ones counted in the field showed that the level of error includes 6.26% in MAPE and 5,410 in RMSE, and thus the prediction error is 20.3% in MAPE.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.685-697
• /
• 2019

The study aimed to analyze the structure of China's passenger railway network in the years of 2008, 2013, and 2018, respectively. At the same time, it tried to investigate its derivative impact on the patterns of Chinese urban network. The analytical tool was based on the NetMiner4.0. In order to measure network characteristics of China's passenger railway network, it primarily focused on the degree centrality, betweenness centrality, and closeness centrality. First of all, the higher degree centralities, with a few exceptions, were observed in BeiJing, ShangHai, GuangZhou, WuHan, XiAn, ChengDu, HaErBin, and ShenYang over a decade. In contrast, the higher betweenness centralities were recorded in cities of higher development potential including WuLuMuQi, GuiYang, ShenYang, and KunMing. The closeness centrality analyses confirmed the fact that most metropoles like BeiJing, ShangHai, and GuangZhou kept the highest train accessibility during the same research period. At the same time, the opening up of a new stretch of high speed railway network has consecutively strengthened connectivity between BeiJing and TianJin. Owing to unprecedented development of railway traffic and its extensive operations, this study believes that Chinese major cities, without interruption, would pursue a series of urban policy alternatives geared towards railway stations-oriented networking and competitively try to extend their network ranges.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.67-80
• /
• 2019

Augmented Reality (AR) is a crucial technology in the Fourth Industrial Revolution that can revolutionize the existing Information and Communication Technology (ICT) market and powerfully create a new market However, it is hard to find the clear answer for AD/PR strategies in the rapidly changing AR market. Thus this research explores the big picture of the AR industry as it pertains to Politics, Economy, Social, and Technology through in-depth interview with seven AR experts who are leading the domestic AR market. The research also analyzes the AR market's Strengths, Weaknesses, Opportunities, and Threats. Furthermore, it looks for strategies to vitalize the advertising and PR industry by analyzing the Contents, Platform, Network, and Devices of the AR ecosystem. The results of the research indicate a need for the government's strengthened policy of supporting the AR market, fostering of pace-setting killer contents, connecting services of several industries through AR platforms, strengthening the network of communication systems such as through 5G, and the commercialization and industrialization of domestic devices in order to vitalize the AR industry in its marketing and PR spheres. Therefore, this research suggests measures to revitalize the marketing and PR industries of the AR ecosystem, which has only recently gotten to its developing stage and provides an academic as well as practical foundation for future research in the field of AR.

• Management & Information Systems Review
• /
• v.38 no.2
• /
• pp.83-103
• /
• 2019

Supply chain management(SCM) requires efforts to search for methods for mutual growth with partner companies and to maintain continuous cooperative relations in order to gain a competitive edge. Because information competencies play a big role within the supply chain, it is essential to examine the relationship of information sharing and partnership quality that can affect information competency. In order to maintain continuous business relations between partner companies, it is necessary to identify the obstacles with partner companies resulting from the imbalance of power within a supply chain and to take on a strategic approach for effectively managing such obstacles. Therefore, there is a significant need to discuss strategic approach methods to enable the logic of mutual growth through the CSV that is worth learning from the partner company and the attributes of non-mediated power. CSV will be reviewed from various aspects as a new management paradigm in the future. This study aims at suggesting a continuous growth model for companies by solving social problems through the integration of CSV and the concept of non-mediated power to advance the information competencies of SCM. A total of 142 copies of survey forms for SCM Implementation Companies were using the PLS structural equation modeling for an analysis, and the following are the findings. Results of this study showed that both CSV and non-mediated power had significant impact on information sharing and partnership qualities, and the conclusion that it is possible to enhance information competency through information sharing and partnership quality. Based on this, this study proposes the implication that it is necessary to elevate awareness of CSV and non-mediated power as variables for the coexistence of SCM participating companies.