• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.60-68
• /
• 2000

본 논문에서는 표준 메모리 공정에 구현이 가능한 CMOS 전류원의 설계 기법에 대해 논한다. 제안하는 설계기법은 자기바이어스 기법을 활용하여 공급전압의 변화에 대해 매우 좋은 특성을 갖고, 새로운 온도보상 기법을 통해 온도변화에 대한 출력전류 변이의 일차성분을 제거할 수 있으며, 칩 내의 전압잡음에 강한 새로운 전류감지 스타트업 회로를 포함한다. 이러한 CMOS 전류원의 회로설계 기법과 함께 제안된 CMOS 전류원을 초고속 DRAM의 클록 발생회로에 적용할 수 있는 방법에 대해서도 논의한다. 본 논문에서 제안된 CMOS 전류원의 설계기법은 해석적인 방법과 함께 회로 시뮬레이션을 통해 그 유용성을 입증한다.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.453-458
• /
• 2015

We presented a quad-rotor controlling algorithm design by using sensor fusion in this paper. The controller design technique was performed by a PD controller with a Kalman filter and compensation algorithm for increasing the stability and reliability of the quad-rotor attitude. In this paper, we propose an attitude estimation algorithm for quad-rotor based sensor fusion by using the Kalman filter. For this reason, firstly, we studied the platform configuration and principle of the quad-rotor. Secondly, the bias errors of a gyro sensor, acceleration and geomagnetic sensor are compensated. The measured values of each sensor are then fused via a Kalman filter. Finally, the performance of the proposed algorithm is evaluated through experimental data of attitude estimation. As a result, the proposed sensor fusion algorithm showed superior attitude estimation performance, and also proved that robust attitude estimation is possible even in disturbance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.31-32
• /
• 2006

A signal conditioning circuit for capacitive sensors was developed using a commercial single chip solution. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. Up to now, several companies already have succeeded in the development of the capacitive sensors system and they are commercially available in the market. In this research, to construct the signal processing circuits more easily and simply, we used a universal LVDT signal conditioner (AD698). Since the AD698 provides one chip solution for a basic signal processing including modulation and demodulation using various internal components, we can build the processing circuits successfully with minimal additional circuits: a compensation circuits for the drift caused by the bias current of OP amplifiers and a fine adjustment circuit for the elimination of nonlinearity. The signal processing circuits shows nonlinearity less than 0.05% in the comparison with a laser interferometer.

• 한국산업정보학회논문지
• /
• 제18권6호
• /
• pp.25-30
• /
• 2013

나노크기 MOSFET 공정에서 회로의 신뢰도에 영향을 미치는 음 바이어스 온도 불안정성(NBTI), 핫 캐리어 주입(HCI), 시간 의존 유전체 파손(TDDB) 등과 같은 노화 현상들에 의해서 회로 성능의 심각한 저하를 가져올 수 있다. 그러므로, 본 논문에서는 디지털회로에서 발생할 수 있는 노화를 극복할 수 있는 적응형 보상 회로를 제안하고자 한다. 제안된 보상회로는 노화에 의해 감소하는 회로 성능을 적응적으로 보상해 주기 위해서 노화 정도에 따라 파워스위치 폭을 조절할 수 있고, 순방향 바디 바이어싱 전압을 걸어줄 수 있는 파워 게이팅 구조를 사용하여서 45nm의 공정기술에서 설계되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.385-385
• /
• 2012

A two terminal N+/P/N+ junction device to replace the conventional selective transistor was studied as a bilateral switching device for spin transfer torque (STT) MRAM based on 3D device simulation. An N+/P/N+ junction structure with $30{\times}30nm$ area requires bi-directional current flow enough to write a data by a drain induced barrier lowering (DIBL) under a reverse bias at N+/P (or P/N+ junction), and high current on/off ratio of 106. The SiGe materials are widely used in hetero-junction bipolar transistors, bipolar compensation metal-oxide semiconductors (BiCMOS) since the band gap of SiGe materials can be controlled by changing the fraction and the strain epilayers, and the drift mobility is increased with the increasing Ge content. In this work, N+/P/N+ SiGe material based junction provides that drive current is increased from 40 to $130{\mu}A$ by increased Ge content from 10~80%. When Ge content is about 20%, the drive current density of SiGe device substantially increased to 2~3 times better than Si-based junction device in case of 28 nm P length, which is sufficient current to operation of STT-MRAM.

• Journal of Preventive Medicine and Public Health
• /
• 제33권1호
• /
• pp.17-24
• /
• 2000

Objectives : To propose the referential data to evaluate the health impacts of Vietnam veterans' children whose father were exposed to herbicides in Vietnam War. Methods : Vietnam veterans who visited to Pusan Veteran Hospital for medical care were recruited from April to October, 1998. They were 71 and asked about their own combat history, symptoms and illness, and health status of their 182 children. The informations were collected by direct and phone interview. Exposure estimation was also performed as exposure score depending on year and unit of participation, and personal episodes related to exposure to herbicide in the war. It classified into three groups; lower(<18.0), moderate(18-53), high$(\geq53)$ exposure group. Results : The mean age and the period into the combat of the veterans were 52.8 years and 15.0 months. The mean exposure score was $18.1{\pm}9.9$, and mainly distributed in lower (46.5%) and moderate(52.1%) exposure group. Most(90.1%) of them were diagnosed as sequelae(21 cases) and suspected sequelae(43 cases) of the herbicides by Korean veteran's hospital diagnostic criteria. The major sequelae was peripheral neuropathy 13 cases, chloracne 5 cases, and the major suspected sequelae was hypertension 20 cases, diabetes mellitus 18 cases, liver disease 12 cases, central neuropathy 11 cases, etc. About birth, 42.2% and 16.9% experienced spontaneous abortion and stillbirth, respectively. The mean exposure score was higher in stillbirth experience group(p<0.05). About half of the children(90 cases, 49.5%) hold the abnormal health status: those were skin pigmentation 38 cases, rash 23 cases, congenital anomaly 15 cases, general weakness 12 cases, purpura 8 cases, visual disturbance 8 cases, etc. These health problems had no association with father's exposure level(p>0.05). Conclusions : These results were depend on their own answers, and expectation for compensation did not excluded, therefore, this study may have limitations: inaccuracy of informations due to recall bias and response bias. Nevertheless, through this study, we could image the fundamental aspect for health impacts of Vietnam veterans' children for preparing the national control program and policy. A large scale epidemiologic study with valid exposure assessment on the health impacts of Vietnam veterans' children is recommneded.

• 대한지역사회작업치료학회지
• /
• 제8권3호
• /
• pp.77-89
• /
• 2018

목적 : 본 연구는 뇌졸중 환자에게 적용한 지역사회이동을 위한 작업치료적 중재를 분석한 논문으로, 임상에서 지역사회이동에 대한 중재를 사용하는데 있어 근거를 제시하고자 한다. 연구방법 : PRISMA checklist와 diagram을 통해 체계적 고찰을 시행하였고, 데이터베이스는 PubMed, EMBASE, Cochrane library (CENTRAL), ProQuest Dissertations & thesis (PQDT), 한국교육학술정보원(RISS)과 코리아메드(KoreaMed)를 이용하였다. 검색기간은 2005년부터 2018년 9월까지로 하였다. 연구에 선택된 문헌의 질 평가는 RoBANS (Riks of Bias Assessment tool for Non-randomized Study)를 사용하였다. 연구에 포함된 문헌은 총 8개이었다. 문헌에서 사용된 중재들은 종류에 따라 분류하였다. 결과 : 문헌의 연구디자인은 무작위배정 실험연구, 유사실험연구, 전후비교연구, 환자-대조군연구, 횡단적 연구로 다양하게 나타났다. 포함된 문헌의 질적수준은 level I이 1편(12.5%), level II가 6편(75%), level III가 1편(12.5%)으로 나타났다. 문헌의 '편향 위험 낮음' 비율은 62.5%~87.5%로 각 문헌마다 다르게 나타났다. 문헌에 사용된 중재는 가상 현실 및 가상환경을 기반으로 한 중재가 4편(50%)으로 가장 많았고, 프로토콜을 이용한 중재가 3편(37.5%), 휠체어 사용훈련이 1편(12.5%)으로 나타났다. 각 중재의 효과는 전반적으로 유의미하게 나타났다. 결론 : 본 연구는 지역사회이동에 대한 작업치료의 중재효과를 체계적으로 보고하여 임상적 적용근거를 제공하였다. 추후 지역사회이동성에 대해 다양한 형태로 중재를 적용한 연구가 이루어져야 할 것이다.

• 한국통신학회논문지
• /
• 제28권11A호
• /
• pp.902-911
• /
• 2003

에미터 면적이 2.0${\times}$20 $\mu\textrm{m}$$^2$인 단위 InGaP/GaAs HBT power cell을 이용하여 IMT-2000 단말기용 MMIC 2단 전력 증폭기를 설계 및 제작하였다. 온도 변화에 따른 전력증폭기의 RF 특성 변화를 보상시킬 수 있으며, 외부 조절 전압으로 대기전류를 줄일 수 있는 능동 바이어스 회로를 채택하였다. HBT의 실측정 S 파라미터와의 fitting을 통하여 비선형 등가 회로 파라미터를 추출하였고, load-pull 시뮬레이션으로 최대 출력 정합 임피던스를 결정하였다. 제작 및 측정 결과, MMIC 2단 전력증폭기는 on-wafer 측정에서 23 ㏈의 전력 이득과 28.4 ㏈m의 출력 전력( $P_{1-}$㏈/) 및 31%의 전력 부가 효율을 얻었으며, FR-4 기판상에 off-chip 출력정합회로를 구현한 COB 측정에서 22.3 ㏈의 전력이득과 26 ㏈m의 출력전력 및 28%의 전력부가효율을 얻었으며, -40 ㏈c의 ACPR 특성을 얻었다..

• 한국환경보건학회지
• /
• 제44권5호
• /
• pp.409-420
• /
• 2018

Objectives: An outbreak of humidifier disinfectant-related respiratory disease has not only been a massive disaster for end users, but it is also a concern for the workers of the manufacturers. This study presents the results of a questionnaire survey on the health effects among workers involved in the manufacture of humidifier disinfectants. Methods: Seven sites where humidifier disinfectants were manufactured were identified. A questionnaire survey was conducted to assess the physical symptoms experienced by workers related to humidifier disinfectants. Among a total of 177 workers, 42 subjects were available for the survey. Results: Twenty-one of the 42 respondents reported that they experienced respiratory or skin and mucosal irritation symptoms during work. Of the respondents who experienced symptoms, 14 believed that their symptoms were related to the work process and reported that the symptoms were experienced while working. However, no respondents reported ongoing symptoms or sequelae during the investigation period, and this result could not minimize selection bias due to low response rates. We then compared the characteristics of the group who experienced suspicious symptoms with those of the group without any symptoms. There was no statistically significant difference between two groups. Conclusions: We could not find significant health effects related to the humidifier disinfectant manufacturing process, although 21 respondents experienced stimulant symptoms and 14 respondents believed that the symptoms were related to the work process. Due to the long period of time after occupational exposure and the lack of data, there were many limitations to this study. However, this is one of the few follow-up investigations of workers related to this large-scale disaster in South Korea and the limitations of this study highlight the need to follow up with a nationwide database rather than an occasional survey.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1566-1576
• /
• 2007

Camera pose information from 2D face image is very important for making virtual 3D face model synchronize with the real face. It is also very important for any other uses such as: human computer interface, 3D object estimation, automatic camera control etc. In this paper, we have presented a camera position determination algorithm from a single 2D face image using the relationship between mouth position information and face region boundary information. Our algorithm first corrects the color bias by a lighting compensation algorithm, then we nonlinearly transformed the image into $YC_bC_r$ color space and use the visible chrominance feature of face in this color space to detect human face region. And then for face candidate, use the nearly reversed relationship information between $C_b\;and\;C_r$ cluster of face feature to detect mouth position. And then we use the geometrical relationship between mouth position information and face region boundary information to determine rotation angles in both x-axis and y-axis of camera position and use the relationship between face region size information and Camera-Face distance information to determine the camera-face distance. Experimental results demonstrate the validity of our algorithm and the correct determination rate is accredited for applying it into practice.