• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.60-68
• /
• 2000

This paper describes a design methodology for the CMOS current source which can be implemented in standard memory process. The proposed techniques provide a good characteristic against the power-supply variation by utilizing a self-bias circuit and the reduction of the first-order component of the temperature variation through the new temperature compensation technique and include a new current-sensing start-up circuit enabling a robust operation against the voltage noise generated during the operation of the chip. In addition to the circuit-design technology, techniques where the proposed CMOS current-reference circuit can be applied to the clocking circuits of a very high-speed DRAM are presented. The feasibility of the suggested design methodology for the CMOS current reference is demonstrated by both the analytical method and the circuit simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.453-458
• /
• 2015

We presented a quad-rotor controlling algorithm design by using sensor fusion in this paper. The controller design technique was performed by a PD controller with a Kalman filter and compensation algorithm for increasing the stability and reliability of the quad-rotor attitude. In this paper, we propose an attitude estimation algorithm for quad-rotor based sensor fusion by using the Kalman filter. For this reason, firstly, we studied the platform configuration and principle of the quad-rotor. Secondly, the bias errors of a gyro sensor, acceleration and geomagnetic sensor are compensated. The measured values of each sensor are then fused via a Kalman filter. Finally, the performance of the proposed algorithm is evaluated through experimental data of attitude estimation. As a result, the proposed sensor fusion algorithm showed superior attitude estimation performance, and also proved that robust attitude estimation is possible even in disturbance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.31-32
• /
• 2006

A signal conditioning circuit for capacitive sensors was developed using a commercial single chip solution. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. Up to now, several companies already have succeeded in the development of the capacitive sensors system and they are commercially available in the market. In this research, to construct the signal processing circuits more easily and simply, we used a universal LVDT signal conditioner (AD698). Since the AD698 provides one chip solution for a basic signal processing including modulation and demodulation using various internal components, we can build the processing circuits successfully with minimal additional circuits: a compensation circuits for the drift caused by the bias current of OP amplifiers and a fine adjustment circuit for the elimination of nonlinearity. The signal processing circuits shows nonlinearity less than 0.05% in the comparison with a laser interferometer.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.25-30
• /
• 2013

In nanoscale MOSFET technology, aging effects such as Negative Bias Temperature Instability(NBTI), Hot carrier Injection(HCI), Time Dependent Dielectric Breakdown (TDDB) and so on which affect circuit reliability can lead to severe degradation of digital circuit performance. Therefore, this paper has proposed the adaptive compensation circuit to overcome the aging effects of digital circuits. The proposed circuit deploys a power gating structure with variable power switch width and variable forward body-biasing voltage in order to adaptively compensate for aging induced performance degradation, and has been designed in 45nm technology.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.385-385
• /
• 2012

A two terminal N+/P/N+ junction device to replace the conventional selective transistor was studied as a bilateral switching device for spin transfer torque (STT) MRAM based on 3D device simulation. An N+/P/N+ junction structure with $30{\times}30nm$ area requires bi-directional current flow enough to write a data by a drain induced barrier lowering (DIBL) under a reverse bias at N+/P (or P/N+ junction), and high current on/off ratio of 106. The SiGe materials are widely used in hetero-junction bipolar transistors, bipolar compensation metal-oxide semiconductors (BiCMOS) since the band gap of SiGe materials can be controlled by changing the fraction and the strain epilayers, and the drift mobility is increased with the increasing Ge content. In this work, N+/P/N+ SiGe material based junction provides that drive current is increased from 40 to $130{\mu}A$ by increased Ge content from 10~80%. When Ge content is about 20%, the drive current density of SiGe device substantially increased to 2~3 times better than Si-based junction device in case of 28 nm P length, which is sufficient current to operation of STT-MRAM.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.17-24
• /
• 2000

Objectives : To propose the referential data to evaluate the health impacts of Vietnam veterans' children whose father were exposed to herbicides in Vietnam War. Methods : Vietnam veterans who visited to Pusan Veteran Hospital for medical care were recruited from April to October, 1998. They were 71 and asked about their own combat history, symptoms and illness, and health status of their 182 children. The informations were collected by direct and phone interview. Exposure estimation was also performed as exposure score depending on year and unit of participation, and personal episodes related to exposure to herbicide in the war. It classified into three groups; lower(<18.0), moderate(18-53), high$(\geq53)$ exposure group. Results : The mean age and the period into the combat of the veterans were 52.8 years and 15.0 months. The mean exposure score was $18.1{\pm}9.9$, and mainly distributed in lower (46.5%) and moderate(52.1%) exposure group. Most(90.1%) of them were diagnosed as sequelae(21 cases) and suspected sequelae(43 cases) of the herbicides by Korean veteran's hospital diagnostic criteria. The major sequelae was peripheral neuropathy 13 cases, chloracne 5 cases, and the major suspected sequelae was hypertension 20 cases, diabetes mellitus 18 cases, liver disease 12 cases, central neuropathy 11 cases, etc. About birth, 42.2% and 16.9% experienced spontaneous abortion and stillbirth, respectively. The mean exposure score was higher in stillbirth experience group(p<0.05). About half of the children(90 cases, 49.5%) hold the abnormal health status: those were skin pigmentation 38 cases, rash 23 cases, congenital anomaly 15 cases, general weakness 12 cases, purpura 8 cases, visual disturbance 8 cases, etc. These health problems had no association with father's exposure level(p>0.05). Conclusions : These results were depend on their own answers, and expectation for compensation did not excluded, therefore, this study may have limitations: inaccuracy of informations due to recall bias and response bias. Nevertheless, through this study, we could image the fundamental aspect for health impacts of Vietnam veterans' children for preparing the national control program and policy. A large scale epidemiologic study with valid exposure assessment on the health impacts of Vietnam veterans' children is recommneded.

• The Journal of Korean society of community based occupational therapy
• /
• v.8 no.3
• /
• pp.77-89
• /
• 2018

Objective : The purpose of this study was to analyze occupational therapy intervention on the community mobility for stroke patients, and to provide evidence of intervention in the clinical fields. Methods : A systematic review was executed according to the PRISMA checklist. The accessed database was PubMed, EMBASE, Cochrane Library (CENTRAL), ProQuest Dissertations & thesis (PQDT), RISS, and KoreaMed. We included the articles published from 2005 to September 2018. RoBANS checklist was used to evaluate the quality of the articles. Included articles, totally eight, were categorized according to the type of intervention. Results : The study design of the literature was varied from two-group randomized trial, quasi-experimental study, case-control trial, one group pre-post comparison study, and cross-sectional study. In the evidence level, 6 articles were included in level II (75%). The percentage of low risk of bias in each article ranged from 52.5%~87.5%. Four studies (50%) provided intervention based on virtual reality or virtual environment. The three (37.5%) provided intervention based on the protocol, and the other (12.5%) did wheelchair training. All studies reported significant effects of the intervention. Conclusion : This systematic review provided evidences to use proper intervention in the clinical fields. Various type of studies should be conducted to prove the effect of occupational therapy intervention for community mobility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.902-911
• /
• 2003

Using InGaP/GaAs HBT power cells with a 2.0${\times}$20$\mu\textrm{m}$$^2$ emitter area of a unit HBT, a two stage MMIC power amplifier has been developed for IMT-2000 handsets. An active-bias circuit has been used for temperature compensation and reduction in the idling current. Fitting on measured S-parameters of the HBT cells, circuit elements of HBT's nonlinear equivalent model have been extracted. The matching circuits have been designed basically with the extracted model. A two stage HBT MMIC power amplifier fabricated using ETRI's HBT process. The power amplifier produces an 1-㏈ compressed output power(P$\_$l-㏈/) of 28.4 ㏈m with 31% power added efficiency(PAE) and 23-㏈ power gain at 1.95 GHz in on-wafer measurement. Also, the power amplifier produces a 26 ㏈m output power, 28% PAE and a 22.3-㏈ power gain with a -40 ㏈c ACPR at a 3.84 ㎒ off-center frequency in COB measurement.quency in COB measurement.

• Journal of Environmental Health Sciences
• /
• v.44 no.5
• /
• pp.409-420
• /
• 2018

Objectives: An outbreak of humidifier disinfectant-related respiratory disease has not only been a massive disaster for end users, but it is also a concern for the workers of the manufacturers. This study presents the results of a questionnaire survey on the health effects among workers involved in the manufacture of humidifier disinfectants. Methods: Seven sites where humidifier disinfectants were manufactured were identified. A questionnaire survey was conducted to assess the physical symptoms experienced by workers related to humidifier disinfectants. Among a total of 177 workers, 42 subjects were available for the survey. Results: Twenty-one of the 42 respondents reported that they experienced respiratory or skin and mucosal irritation symptoms during work. Of the respondents who experienced symptoms, 14 believed that their symptoms were related to the work process and reported that the symptoms were experienced while working. However, no respondents reported ongoing symptoms or sequelae during the investigation period, and this result could not minimize selection bias due to low response rates. We then compared the characteristics of the group who experienced suspicious symptoms with those of the group without any symptoms. There was no statistically significant difference between two groups. Conclusions: We could not find significant health effects related to the humidifier disinfectant manufacturing process, although 21 respondents experienced stimulant symptoms and 14 respondents believed that the symptoms were related to the work process. Due to the long period of time after occupational exposure and the lack of data, there were many limitations to this study. However, this is one of the few follow-up investigations of workers related to this large-scale disaster in South Korea and the limitations of this study highlight the need to follow up with a nationwide database rather than an occasional survey.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1566-1576
• /
• 2007

Camera pose information from 2D face image is very important for making virtual 3D face model synchronize with the real face. It is also very important for any other uses such as: human computer interface, 3D object estimation, automatic camera control etc. In this paper, we have presented a camera position determination algorithm from a single 2D face image using the relationship between mouth position information and face region boundary information. Our algorithm first corrects the color bias by a lighting compensation algorithm, then we nonlinearly transformed the image into $YC_bC_r$ color space and use the visible chrominance feature of face in this color space to detect human face region. And then for face candidate, use the nearly reversed relationship information between $C_b\;and\;C_r$ cluster of face feature to detect mouth position. And then we use the geometrical relationship between mouth position information and face region boundary information to determine rotation angles in both x-axis and y-axis of camera position and use the relationship between face region size information and Camera-Face distance information to determine the camera-face distance. Experimental results demonstrate the validity of our algorithm and the correct determination rate is accredited for applying it into practice.