• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.5
• /
• pp.21-26
• /
• 2014

This paper proposes a frequency reconfigurable antenna which operates at not only LTE but also other currently serviced bands. The high band(1,710-2,170 MHz) performance was satisfied through PIFA structure, and the low band performance through the additional RF Switch by changing the state between SW1 and SW2. When the RF switch is SW1 state, the operation bandwidth is 782-907 MHz (GSM), and 738-861 MHz (LTE) at OFF state. The proposed antenna has a omni-directional radiation pattern and measured peak gains were 0.04-4.68 dBi at the SW1 state and 0.92-1.53 dBi at the SW2 state, respectively. Judging from the results, proposed reconfigurable antenna is expected to be applied to LTE-Advanced mobile terminals since the antenna shows an outstanding performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.129-136
• /
• 2002

A single-phase inverter using a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is presented. It Is shown that the ZACE(Zero Average Current Error) algorithm based Polarized ramptime current control can provide a suitable interface between DC link of diode bridge-type resonant circuit and the inverter. The current control algorithm is analyzed about how to design the circuit with auxiliary switch which can ZVT operation for the main power switch. The simulation and experimental results would be shown to verify the proposed current algorithm, because the main Power switch is turn on with ZVT and the hi-directional inverter is operated.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.323-326
• /
• 2001

In this paper, the proposed current control algorithm is analized and discussed about how to design the auxiliary circuit with auxiliary switch which can apply ZVT operation for the main switch. The simulation results would be shown to verify the proposed current algorithm, because the main power switch is turn on with ZVT and the bi-directional Inverter is operated.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1027-1029
• /
• 2002

In this paper, we present the circuit topology and control scheme of single-phase dc/ac inverter based on class E dc/dc converter for automotive application. The proposed inverter consists of class E series resonant inverter and class E low dv/dt PWM synchronous rectifier with bi-directional switch.

• Journal of Internet of Things and Convergence
• /
• v.6 no.1
• /
• pp.97-102
• /
• 2020

Multi-Channel Switch ICs for IoT have integrated several solid state structure low ON-resistance bi-directional relay MOS switches with level shifter to drive high voltage and they should be independently controlled by external serialized logic control. These devices are designed for using in applications requiring high-voltage switching control by low-voltage control signals, such as medical ultra-sound imaging, ink-jet printer control, bare board open/short and leakage test system using Kelvin 4-terminal measurement method. This paper describes implementation of analog switch control block and its verification using Field programmable Gate Array (FPGA) test pattern generation. Each block has been implemented using Verilog hardware description language then simulated by Modelsim and prototyped in a FPGA board. Compare to conventional IC, The proposed architecture can be applied to fields where multiple entities need to be controlled simultaneously in the IoT environment and the proposed pattern generation method can be applied to test similar types of ICs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.2
• /
• pp.63-69
• /
• 2018

In this paper, the operation principle of a bi-directional switch type resonant AC link snubber circuit was described, together with the practical design procedure, which employs in the proposed power module bridge package type resonant AC link snubber. The novel prototype of power module bridge package type resonant AC link snubber-assisted voltage type sinewave soft switching PWM inverter using IGBT power module was demonstrated herein. It was verified that both the auxiliary power switches in this resonant AC link snubber circuit and the main power switches commutate under the condition of soft switching commutation principle. In addition, the power losses of the new soft switching inverter treated here were analyzed by implementing the experimental data of the IGBT and diode v-i characteristics in addition to switching power loss characteristics into our original computer simulation software developed by the authors. Then, the voltage type sinewave soft switching PWM inverter was high efficiency than that of hard switching PWM inverter, along with performance operation waveforms. In the future, the comparative feasibility study of power module bridge type resonant AC link snubber and its related soft switching inverter in addition to the other types resonant snubber assisted soft switching inverter should be done from a practical point of view.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.169-170
• /
• 2011

본 논문은 양방향 Buck 컨버터 DCM 구동 시 사용되는 스위치의 전류링잉현상을 상세히 분석하고 이에 따른 스위치 효율과 시스템 전력 효율 차이를 실험을 통해 검증한다. 분석을 통해 얻은 결과를 바탕으로 양방향 Buck 컨버터 설계 시 전력 효율을 높이는 스위치 및 다이오드를 선정하였다.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1314-1321
• /
• 2014

A new simplified topology for a dynamic voltage restorer (DVR) based on direct converter with a reduced number of switches is presented. The direct converter is fabricated using only three bi-directional controlled switches. The direct converter is connected between the grid and center-tapped series transformer. The center-tapped series transformer is used to inject the compensating voltage synthesized by the direct converter. The DVR can properly compensate for long-duration, balanced, and unbalanced voltage sag and swell by taking power from the grid. The switches are driven by ordinary pulse width modulation signals. Simulation and hardware results validate the idea that the proposed topology can mitigate sag of 50% and swell of unlimited quantity.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.593-603
• /
• 2009

This paper proposes and describes the design and operational principles of a three-phase three-level nine switch voltage source inverter. The proposed topology consists of three bi-directional switches inserted between the source and the full-bridge power switches of the classical three-phase inverter. As a result, a three-level output voltage waveform and a significant suppression of load harmonics contents are obtained at the inverter output. The harmonics content of the proposed multilevel inverter can be reduced by half compared with two-level inverters. A Fourier analysis of the output waveform is performed and the design is optimized to obtain the minimum total harmonic distortion. The full-bridge power switches of the classical three-phase inverter operate at the line frequency of 50Hz, while the auxiliary circuit switches operate at twice the line frequency. To validate the proposed topology, both simulation and analysis have been performed. In addition, a prototype has been designed, implemented and tested. Selected simulation and experimental results have been provided.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.67-73
• /
• 1996

Subsynchronous resonance(SSR) causes a torsional shaft torque on the generator. Damages resulting from the uncontrolled SSR have resulted in the breakdown in the shaft and costs for replacement power. This paper is to determine the feasibility of controlling SSR by the fast modulation of series compensation capacitors. The presence of subsynchronous currents in the system was detected by a subsynchronous relay which was modeled by the transient analysis of control systems(TACS) in electromagnetic transients program (EMTP). The capacitor segments were switched by bi-directional thyristor switches. These were modeled into EMTP. The strategy to switch the capacitors were modeled as a closed loop system. The paper proves that effective control of SSR can be obtained only by the detuning of the system and the removal or blocking of subsynchronous energy from the system. (author). refs., figs., tabs.