• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.672-676
• /
• 2003

The single crystalline thick films of Y$_3$Fe$\sub$5/O$\sub$12/(YIG), Y$_3$Fe$\sub$5/O$\sub$12/(Bi:YIG), (TbBi)$_3$(FeAlGa)$\sub$5/O$\sub$12/ (TbBi:YIG) were grown on (GdCa)$_3$(GaMgZr)$\sub$5/O$\sub$12/ (SGGG) by Liquid Phase Epitaxy (LPE). The change of lattice mismatch, Bi concentration, characteristic of magnetic and surface morphology were investigated in the thick film growth as a function of species and amount of chemical element, while substrate rotation speed, supercooling and growth time were kept constant. It was observed that the lattice constant of garnet single crystalline thick films of TbBi:YIG (12.500 ${\AA}$) is closed to the one of the substrate (12.496 ${\AA}$). Besides magnetic field of saturation exhibits excellent results (150 Oe).

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.710-715
• /
• 2001

반응소결공정(RSP : Reaction Sintering Process)을 이용하여 YF댸₃와 Fe₂O₃의 성분에 소결첨가재 Bi₂O₃를 첨가하여 YIG를 합성하였다. Bi₂O₃첨가량과 소결온도에 따른 YIG 소결체의 미세구조 및 자기적 특성변화에 대해 주사전자현미경, X-선 회절분석기 및 시료 진동형 자력계를 이용하여 조사하였다. 소량의 소결첨가재 Bi₂O₃첨가시 YIG 소결체의 격자상수는 12.387에서 12.420 Å으로 증가하였다. 이는 상대적으로 이온반경이 큰 Bi 이온이 12면체 Y 이온 자리로 치환되었기 때문인 것으로 여겨진다. Bi₂O₃를 1.0 wt% 첨가하였을 때 비교적 균질한 미세구조를 보였으며, 1350℃에서 소결한 YIG의 밀도가 이론밀도의 98% 이상의 치밀화를 보였다. Bi₂O₃가 0.0 wt%에서 1.5 wt%로 첨가량이 증가함에 따라 상온에서의 포화자화값(M/sub s/)은 조금씩 증가하는 경향을 보였으나 큰 변화는 없었다. 반응소결공정을 이용 YIG 소결시 소결첨가제 Bi₂O₃가 1.0 wt%이고, 소결온도 1350℃에서 비교적 우수한 소결특성과 자기특성을 가지는 YIG 소결체를 얻을 수 있었다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.100-101
• /
• 2002

자성가넷 박막은 가시광선 영역에서 큰 값의 페러데이 회전각을 갖고, 광흡수가 적어 우수한 자기광학 특성을 나타내는 재료로 널리 알려져 있다.[1]. 또한 가넷에 Bi를 치환하면 성능지수가 크게 증가하는 것이 알려져 있으므로 현재 연구개발의 초점이 Bi치환 가넷 박막에 모아지고 있다. 가넷박막을 제조하는 방법에 있어 종래에는 스퍼터링법, LPE법, 열분해법 등으로 연구되어 왔으나, 스퍼터링법과 LPE법의 경우 공정이 복잡하고 고가의 장치가 필요한 단점이 있으며, 열분해법의 경우에는 잔존하는 일부 분해가스로 인하여 박막이 다공질화 될 우려가 있다.[2]. (중략)

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.05a
• /
• pp.18-19
• /
• 1997

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.14-18
• /
• 2008

Bismuth-substituted yttrium iron garnet(Bi:YIG) films, which show excellent magnetic and magneto-optical properties as well as low optical losses by optimizing their deposition and post-annealing condition, have been attracting great attention in optical device research area. In this study, the Bi:YIG thick films were deposited with the aerosol deposition method for the final purpose of applying them to optical isolators. Since the aerosol deposition is based on the impact adhesion of sub-micrometer particles accelerated by a carrier gas to a substrate, the flow rate of carrier gas, which is in proportion to mechanically collision energy, should be treated as an important parameter. The Bi:YIG($Bi_{0.5}Y_{2.5}Fe_5O_{12}$) particles with $100{\sim}500$ nm in average diameter were carried and accelerated by nitrogen gas with the flow rate of 0.5 l/min${\sim}$10 l/min. The coercive force decreased from 51 Oe to 37 Oe exponentially with increasing gas flow rate. This is presumably due to the fact that the optimal collision energy results in reduction of impurity and pore, which makes the film to be soft magnetically. The saturation magnetization decreased due to crystallographical distortion of the film with increasing gas flow rate.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.9-13
• /
• 2008

Bismuth-substituted yttrium iron garnet($Bi_{0.5}Y_{2.5}Fe_5O_{12}$) films were deposited with the aerosol deposition method and their magnetic and optical properties were investigated as a function of the aerosol incident angle. The optical transmittance of Bi:YIG increased about 80% with increasing the aerosol incident angle from 0 degree to 30 degree, due to decrease of the defects which were formed from agglutinations of the Bi:YIG particles inside and/or surface of the film. The coercive force also decreased largely with increasing the aerosol incident angle due to the reduction of the collision energy between the particles and the substrate and the decrease of the defects.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.193-198
• /
• 2004

Using the $PbO-B_2O_3-Bi_2O_3$ flux system, $(TbBi)_3(FeAIGa)_5O_{12}(TbIG)$, $(EuBi)_3(FeAIGa)_5O_{12}(EuIG)$ and $(EuTbBi)_3(FeAIGa)_5O_{12}(EuTbIG)$ films were grown on $(GdCa)_3(GaMgZr)_5O_{12}(SGGG)$ substrates by the liquid phase epitaxy (LPE). The saturation magnetization of the grown TbIG, EuIG and EuTbIG films was about 150, 950 and 125 Oe, respectively. The TbIG films resulted in the single magnetic domain while the EuIG and EuTbIG films were observed to be the multi magnetic domains by magnetic force microscope (MFM).