• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.774-781
• /
• 2014

Acetylenic or phenylethynyl end-capped polyisoimide oligomers ($M_w$ 2500 g/mol, 5000 g/mol) based upon 4,4'-diamino diphenyl ether (4,4'-ODA)/4,4'-oxydiphthalic anhydride (ODPA) and 4,4'-ODA/3,3',4,4'-benzophenone tetracarboxylic acid dianhydride (BTDA) were synthesized by using 4-ethynylaniline (4-EA) or 4-phenylethynyl phthalic anhydride (4-PEPA) as an end capper. The incorporation of ethynyl groups were confirmed by FTIR spectroscopy. The isomerization temperature was influenced by molecular weight as well as the backbone structure of polyisoimides oligomers. Thus, polyisoimide oligomers with molecular weight of 2500 g/mol was found to be imidized at temperature $10^{\circ}C$ lower than that for the oligomers with molecular weight of 5000 g/mol. The crosslinking reaction of ethynyl groups occurred at a higher temperature than that for the isoimide/imide isomerization reaction. These two reactions were totally or partially overlapped on the DSC thermograms for the polyisoimide oligomer end-capped with 4-EA. Kinetics of thermal imidization and crosslinking reactions for the 4,4'-ODA/ODPA polyisoimide oligomers end-capped with 4-PEPA were investigated by performing dynamic DSC experiments at heating rate of $10^{\circ}C/min$. The activation energy and pre-exponential factors were 141 kJ/mol and $1.45{\times}10^{13}min^{-1}$ for the imidization reaction and 177 kJ/mol and $2.90{\times}10^{13}min^{-1}$ for the crosslinking reaction, respectively.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.212-220
• /
• 1976

The photocyclization of 1,1'-dicycloalkenyls (1,1'-dicyclohexenyl, 1,1'-dicyclopentenyl, 1,1'-dicycloheptenyl and 1,1'-dicyclooctenyl) is studied. Irradiation at liquid nitrogen temperature does not show trans double bond band in IR spectra. Even though naphthalene and pyrene fluorescence are quenched very efficiently by 1, 1'-dicycloalkenyls, no or trace amount of cyclobutenes are accompanied. When acetophenone or benzophenone is used, cyclobutene is obtained only from 1,1'-dicyclohexenyls, 1,1'-dicycloheptenyl giving some adducts. Naphthalene and pyrene sensitizes adduct formation but not cyclization. From above observations, it is concluded that photocyclization occurs from the planar s-cis triplet state rather than twisted triplet, singlet excited state or vibrationally excited ground state in sensitized photocyclization of 1,1'-dicycloalkenyls.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.61-80
• /
• 1998

To investigate in influence of photosensitizer used with benzophenone(BP) in the curing rate and physical properties of UV curable hard coating on plastic, we prepared UV curable clear and pigmented coatings with DEA, DMA, NPM and TEA as photosensitizer, respectively. The curing rate calculated from the decrease of the absorbance of acrylic double bond measured by FT-IR spectroscopy increased s follows; DEA>DMA>NPM>TEA. this order could be explained by the reactivity of diethylamino group of DEA and the ease of formation of activated complex between BP and photosensitizer during the curing process. In UV curable pigmented coatings, the order of curing rate increased as follows; DEA>DMA>TEA>NPM. It was found that the curing rate of the pigmented coating can be increased by light scattering of TiO$_2$. The hardness of coating film cured by photosensitization of DEA and DMA is higher than other photosensitizers due to the crosslinking reaction of DEA and DMA radical bound to polymer backbone.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.384-392
• /
• 2004

The purpose of this study is in development of effective filter-type polymer adsorbent for removal of pollutants from wastewater by UV irradiation graft polymerization. Photografting of acrylic acid (AA) on polypropylene (PP) nonwoven fabric using benzophenone (BP) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As AA concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BP concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight and breaking stress and breaking strain were decreased with the increase in the degree of grafting.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.39-44
• /
• 1995

A study has been made about some correlations in the chemical cyclization of precursors, poly(ether-amide-amic acid)s by treating in solution a mixture of acetic anhydride and pyridine in the presence of 4,4-dimethyl formamide, with the poly(ether-amic acid)s being respectively reacted between trimellitic anhydride chloride and 3 kinds of diamines, i.e., 4,4'-bis(m-aminophenoxy) benzophenone, 2,2'-bis[4-(m-aminophenoxy) phenyl] propane and 4,4'-bis(m-aminophenoxy) diphenyl sulfone. The cyclization of imide ring in the poly(ether-amide-amic acid)s may be regarded as an intramolecular acylation of amide group by o-carboxyl group. As a result of this reseach, the effects on the conversion to poly(ether-amide-imide)s have been found by changing the ratio of cosolvents in the cyclization mixture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.885-888
• /
• 2004

We have prepared and investigated the properties of photoinitiator-free photosensitive polyimide gate insulatos for organic thin-film transistors (OTFTs). The precursor was prepared from a dianhydride, 3,3',4,4'-Benzophenone tetracarboxylic dianhydride (BTDA) and novel aromatic diamine, 7-(3,5-diaminobenzoyloxy) coumarine (DA-CM). Photo-patternability of the polyimide precursor film and surface morphology of the films before and after photo-patterning process were investigated and negative pattern with a resolution of 50 ${\mu}m$ was obtained nicely. In addition, we have fabricated OTFTs with pentacene and photosensitive polyimide as a semiconductor and a gate insulator; respectively. According to the device geometry, the ${\mu}$, current modulation ratio and subthreshold swing of the devices were around 0.2${\sim}$0.4 $cm^2$/Vs, more than $10^5$ and around 3${\sim}$5 V/dec, respectively.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.116-123
• /
• 1990

Synthesis and characterization of photosensitive orthonaphthoquinonediazide-sulfonyl derivatives were studied. These photoactive compounds underwent a UV induced transformation to the base-soluble photoproduct. The photoresists were prepared using these photoactive compounds with low molecular weight m-cresol novolacs as matrix resin. And photosensitive characteristics of the photoresists were studied. 3, 4, 5-Trihydroxy-benzophenone with bulky resonance structure increased the sensitivity and the solubility rate of the exposed region. The mixture of PAC and matrix resin having 3:8 weight ratio had the moderate rate of dissolution in the developer. The photoresist using these conditions showed the best snsitivity and contrast under the fixed conditions.

• Biomolecules & Therapeutics
• /
• v.10 no.4
• /
• pp.246-252
• /
• 2002

In recent years, the safety of sunscreens has been challenged based on the reports of their adverse effect on users; dermatitis, allergic contact dermatitis and photo allergic contact dermatitis. The unscientific idea that higher SPF sunsreen is good for health mealeads many users to tend to prefer higher SPF sunscreen. In the toxicological aspect, the need to investigate the safety of sunscreens is steadily increasing. However, there were few studies on the correlation between sun protection factor (SPF) and the safety of sunscreens. The objective of this study was to assess whether there was a correlation between SPF and the safety of sunscreens. We measured in vitro SPF index using homosalate as a standard and examined the toxicity tests such as primary skin irritation tests, ocular irritation test and skin sensitization test. Homosalate (HS), octyl methoxycinnamate (OMC), octyl salicylate (OS), octocrylene (OC) as UVB organic filter and benzophenone-3 (BP3), butyl methoxy dibenzoil methane (BMDM) as UVA organic filter, and titanium dioxide (TD), zinc oxide (ZO) as inorganic filters were used. The skin irritation indexes in rabbits treated with HS, OMC, OS, BP3, and BMDM were significantly increased as SPF indices were increased. Neither ocular irritation in rabbits nor skin sensitization in guinea pigs were increased. It suggests that there might be a good correlation between SPF and the skin irritation indices of organic UV filters and skin irritation might be one of most sensitive index to assess the safety of sunscreens.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.157-163
• /
• 1995

The ultraviolet blocking agents used to skincare are largely classified ultraviolet scattering agent and ultraviolet absorbent agents. There are UVC, UVB, and UBA in ultraviolet ray(UV) showing shorter wavelength than visible light. Both visible light and UVA give rise to 1st dark-skinned phenomena. On exposure of the skin to UV, phenomena of skin variation are termed sunburn or suntan. There are chronic and acute adverse reactions in skin response to UV. The latter is caused by UVB, which has mainly effects on the skin. But lately due to destruction of ozone layer, UVA has more serious irritation on the skin than UVB. In this paper spectrometric properties of UV absorbent agents such as PABA, octyl-PABA, Urocanic acid, and 2-hydroxy-4-methoxy benzophenone in vitro have been investigate. As results, it was found that the three fomer were more suitable than the last. UV scattering measurements on the sample used inorganic pigments showed that pigments containing titanium dioxide had a better scattering effects than the inorganic pigments such as $Fe_2O_3$, $Al_2O_3$, etc.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.231-236
• /
• 2019

This study investigated the proper dyeing conditions, color fastness and functionality of wool fabrics dyed with Zizania latifolia Turcz. We also tried to improve light fastness through treatment with benzophenone ultraviolet absorber. The dyeing of wool fabrics using Zizania latifolia Turcz was good even without pretreatment or mordanting treatment. Optimal wool fabric dyeing conditions were colorant concentration of 200% (o.w.f.), dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and a dye bath pH of 3. Color fastness of dyed wool fabrics to washing, rubbing, perspiration and light was 4-5, 5, 4-4-5 (acidic), 4-5 (alkaline) and 2 respectively. The results after treatment with ultraviolet absorber for improving the fastness of daylight were improved to 3-4 grade. The UV protection rate were increased after dyeing and the deodorization of ammonia gas improved to 98%. Bacterial reduction rate (Staphylococcus aureus) of wool fabrics was excellent at 99.9%. All dye fastness (except for light fastness) was excellent; in addition, the functionality of wool fabrics dyed with Zizania latifolia Turcz also improved. The results are expected to be applied to various fields because they indicate excellent results after treatment with ultraviolet absorber for improving the fastness of daylight.