• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.119-120
• /
• 2010

• Journal of the Korean Wood Science and Technology
• /
• 제36권5호
• /
• pp.33-41
• /
• 2008

This study was aimed to develop the knot quantification method to predict bending strength, using x-ray scanner. The bending strength prediction model was proposed in this paper. The model was based on Knot Depth Ratio (KDR) and closely-spaced knot was taken into account. The previous paper reported that KDR is the ratio of the knot and transit zone to the lumber thickness. Even though KDR involves transit zone, it was verified that the ratio of the moment of inertia for knot to gross cross section ($I_k/I_g$) based on KDR was a good predictor for bending strength of lumber. To take closely-spaced knot into account, a projection method was also proposed. This projection method improved the predictive accuracy significantly. It showed coefficient of determinant of 0.65 and root mean square error (RMSE) of 9.17.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 1997

The purpose of this study is the development of the extensive Rapid Prototyping Technique, which can resolve the long-term manufacturing process, shrinkage and deformation occurring rapid prototyping technique. To begin with, the various specimens for tensile and bending test were manufactured on the basis of this modeling technology. Then, many kinds of the laminate pieces for the test were made by using the sheet steels 1 mm and 2 mm thickness which is composed of the same ingredient. Not only the mechanical strength of the both of the laminate specimens by the developed Rapid Prototyping using projection welding and non-laminate specimens of 5 mm thickness were evaluated, but the mechanical strength of the specimens of the tensile and bending test composed of heterogeneous components were also estimated.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권6호
• /
• pp.897-906
• /
• 2017

프로젝션 맵핑(공간증강현실)은 현실세계에서 다양한 가상의 환영(幻影)을 만들어내는 것으로 최근에 많은 분야에 사용되고 있다. 기존의 프로젝션 맵핑에서는 사용자와의 자연스러운 상호작용으로서 접히거나 구부러지는 것 과 같은 유연한 물체의 기하학적인 변형 속성(예: 용지)의 움직임을 고려하지 않았다. 또한, 정적 물체에 대한 프로젝션 맵핑에 대한 많은 연구가 있었지만, 유연한 타깃의 움직임을 추적하고 사용자와의 상호작용 측면에서 모양이 변형된 물체에 맵핑을 정확히 하는 다이내믹 프로젝션 맵핑은 여전히 도전해야할 연구 분야이다. 따라서 본 논문에서는 Unity3D와 ARToolkit을 이용한 실험을 통해 단단하지 않은 물체에 대한 견실한 추적과 정확한 맵핑 방법을 제안한다. 제안하는 방법은 큐빅 베지어 곡면 형성, 움직임 변형 값 렌더링 과정, 멀티플 마커 인식과 트래킹 과정, 실시간 웹캠 지속 촬영의 4가지 실험 단계로 구성된다. 사용자는 물체에 변형을 주기 위해 직접 접고, 휘고, 구부리고 비틀 수 있다. 제안 방법은 세 가지 긍정적인 결과를 도출할 수 있다. 첫째, 물체의 형태가 강하게 변형되어 있어도 감지 가능하다. 둘째, 사용자가 직접 물체에 변형을 주는 과정에서 물체의 일부분을 차단하고 있을 때의 Occlusion오류를 줄일 수 있어 정확한 트래킹을 할 수 있다. 셋째, 제안 방법의 견실하고 정확함은 빠른 속도로 물체의 움직임을 감지하게 하므로 실시간으로 결과 값을 물체에 투영할 수 있다.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.46-50
• /
• 2004

In today's highly competitive marketplace, it is of great significance for the manufacturing industry to reduce lead-time and costs fur the product development. Since first emerged in 1986, Rapid Prototyping (RP) technology has helped successfully to reduce time and costs. Recently, RP using functional materials such as metal has been researched. However RP using the molten metal has been struggling to resolve several drawbacks, such as dimensional inaccuracy, poor surface finish, post finishing, etc., that originate primarily from the overall deposition of molten metal for each layer. So, the purpose of this study is to develop a new RP technique using sheet metal and projection welding for reducing several drawbacks in occurring RP using molten metal. Also tensile and bending specimens were made by the developed RP process using projection welding and were verified.

• 전자공학회논문지B
• /
• 제28B권5호
• /
• pp.335-342
• /
• 1991

A real-tme nonlinear parameter tomography is pumping wave method. This tomorgraphy has a merit which requires no 180$^{\circ}$ projection datum, while the ray-bending effect is remrkably remained on the reconstructed image. In this paper we intend to compensate this ray-bending effect using the perturbation method. Impulsive pumping wave makes derived compensative term simple form, nad the compensative image is easily obtained. We perform computer simulation to confirm the improvement of corrected imate.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.82-87
• /
• 2012

For different ferrite-pearlite matrix structure, contain more than 90% spheroidal ratio of graphite, GCD 45-3, GCD 50, GCD 60 series and 70%, 80%, 90% spheroidal ratio of graphite, GCD 40, GCD 45-1, GCD 45-2 series, this paper has carried out rotary bending fatigue test, estimated maximum and mean size of spheroidal graphite, investigated correlation. It was concluded as follows. (1) Fatigue limit in $10^7$cycles and numbers of spheroidal graphite per 1$mm^2$ was linear relation. (2) projection area of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of projection area of defects may be used as a guideline for the control of inclusion size in the steelmaking processes.

• Structural Engineering and Mechanics
• /
• 제58권3호
• /
• pp.443-458
• /
• 2016

In this paper, we propose a method for taking into account uncertainties based on the projection on polynomial chaos. Due to the manufacturing and assembly errors, uncertainties in material and geometric properties, the system parameters including assembly defect, damping coefficients, bending stiffness and traction-compression stiffness are uncertain. The proposed method is used to determine the dynamic response of a one-stage spur gear system with uncertainty associated to gear system parameters. An analysis of the effect of these parameters on the one stage gear system dynamic behavior is then treated. The simulation results are obtained by the polynomial chaos method for dynamic analysis under uncertainty. The proposed method is an efficient probabilistic tool for uncertainty propagation. The polynomial chaos results are compared with Monte Carlo simulations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.664-667
• /
• 2001

A flat-type L$_1$-B$_{8}$ Mode Ultrasonic motor(USM) uses longitudinal-bending multi-mode vibrator which is constructed with the metal-piezoceramic composite thin plate vibrator. Especially, the characteristics of vibrating displacement of the vibrator are important for the fabrication of USM. So, in this study, we tried to analyze them by the FEM(finite element method) simulation program. ANSYS 5.6 we used is a finite element software enabling the analysis of 2 or 3 dimensional structure of piezoelectric materials. Using this made us analyzing the resonance frequency and calculating displacement of vibrator and then the position of the projection.n.

• 대한기계학회논문집B
• /
• 제33권10호
• /
• pp.803-810
• /
• 2009

Micromirrors have a wide range of applications such as optical switches, laser scanners, and digital projection displays. Due to their low performances and high costs, however, practical applications of micromirrors are quite limited. At present micromirrors demand not only a better design but also a simple fabrication process. In this study a twisting-type micromirror that can be driven by two thermal bimorph actuators bending in opposite directions is designed from electro-thermo-mechanical theories and fabricated through a simple MEMS process. Each actuator consists of $SiO_2$ and gold thin-film layers. Simplified analytical model has been built to optimize the performance of micromirror. Due to unexpected resistance increase of metal film and alignment mismatch during fabrication process, experimental rotation angles of micromirrors are about $11^{\circ}$ at applied voltages less than 0.6V. From numerical simulation and analytical studies, however, the next design can provide rotation angles over $20^{\circ}$ at the same applied voltage.