• ETRI Journal
• /
• 제36권5호
• /
• pp.841-846
• /
• 2014

This study proposes a novel optical sensor structure based on a refractometer combining a bend waveguide with an air trench. The optical sensor is a $1{\times}2$ splitter structure with a reference channel and a sensing channel. The reference channel has a straight waveguide. The sensing channel consists of a U-bend waveguide connecting four C-bends, and a trench structure to partially expose the core layer. The U-bend waveguide consists of one C-bend with the maximum optical loss and three C-bends with minimum losses. A trench provides a quantitative measurement environment and is aligned with the sidewall of the C-bend having the maximum loss. The intensity of the output power depends on the change in the refractive index of the measured material. The insertion loss of the proposed optical sensor changes from 3.7 dB to 59.1 dB when the refractive index changes from 1.3852 to 1.4452.

• 센서학회지
• /
• 제14권3호
• /
• pp.169-179
• /
• 2005

A multiplexed bend loss type single-mode fiber-optic sensor system was prepared to measure the displacement of several cm of the civil engineering structures such as many bridges, tunnels and various buildings. This bend loss type fiber-optic sensor used the signal difference between two reflection signals due to various bend losses generating at a pair of optical connectors by using OTDR (optical time domain reflectometer) for measuring displacements. And the experiments were conducted for showing the measurement feasibility on the range of 10 cm, and the multiplexing experiments were also performed to measure the displacements of 5 measuring positions of an object by setting these 5 fiber-optic sensors on a single mode fiber simultaneously.

• 한국광학회지
• /
• 제15권5호
• /
• pp.415-422
• /
• 2004

교량과 각종 건물을 비롯한 대형 토목 구조물에서 발생하는 수 mm의 변위를 한 개의 광섬유로 간편하게 측정하기 위하여 광커넥터에서 반사가 굽힘 손실에 의하여 변하는 현상을 이용한 새로운 다중화된 광섬유 변위센서를 제안하고 실험하였다. 한 쌍의 광커넥터 양끝에서 반사광의 신호차이가 두 광커넥터 사이에서 발생한 굽힘 변위에 의해서 달라지는 것을 Optical Time Domain Reflectometer로 측정하여 선형으로 그 변화가 측정되는 변위센서를 만들고, 이 센서 4개를 직렬형으로 배열하여 여러 지점의 변위를 동사에 측정이 가능한 다중화 센서 시스템을 구성하고 실험하였다. 그 결과 이 변위센서를 이용하면 4개 지점에서 각각 최대 6 mm까지의 변위를 6%의 오차범위 내에서 0.9942의 선형성을 가지고 변위를 측정할 수 있음을 확인하였다.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.71-79
• /
• 1997

Bulged-type bends with low bending loss are newly proposed, and the FD-BPM is made use of for designing optimum structure. How to evaluate bending loss of conventional bends and how to improve the bending structure based on the phase compensation concept are described in genral. Besides simulation results for the bulged-type bends, results for the coupled-type bends and the chamfered-type bends show the most superior performance in terms of not only the bending loss but also the design tolerance.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.395-396
• /
• 2009

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.252-253
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.374-375
• /
• 2004

• 한국주조공학회지
• /
• 제6권1호
• /
• pp.27-35
• /
• 1986

The gating design of gray cast iron was programmed in a Personal computer. By this program, casting test was done. The results obtained are as follows. 1. Gating design that can calculate the velocity of metal flow and size in each gate section by knowing the loss coefficient caused by friction loss and bend loss was programmed. 2. In the test casting, the gating ratio was changed into 1.1:1.3:1, 1:2:2, 1:4:4. And sound casting, free of sand washing defect, was obtained at the velocity of 35.5cm/sec in ingate.

• 한국광학회지
• /
• 제18권1호
• /
• pp.50-55
• /
• 2007

본 연구에서는 광통신 시스템에 있어서 필수적인 기능으로 전망되고 있는 전광 논리소자를 구현하기 위한 집적된 광소자를 제작, 측정 하였다. 유기금속화학증착법(MOCVD)을 이용한 선택영역 성장기술을 이용하여 서로 다른 두 활성영역을 한 기판위에 성장함으로써 능동 반도체 광소자인 반도체 광증폭기와 수동 반도체 광소자인 다중모드 간섭 도파로, S-자 도파로를 집적하였다. 집적된 수동 소자부분의 손실을 측정하고 전광 논리소자를 구현하는 방법 중 하나인 반도체 광증폭기의 cross-gain modulation(XGM)특성을 측정하여 집적된 전광 논리소자로의 사용 가능성을 알아보았다.

• 전기학회논문지P
• /
• 제61권1호
• /
• pp.5-9
• /
• 2012

In this paper, multi folded dual monopole antenna for WLAN communication of dual bend is designed and fabricated. The proposed multi folded dual monopole antenna are consisted of two folded rectangle loops by microstrip fed that is modified dual monopole antenna. Therefore, the outside rectangle loop structure of the proposed antenna is extended a dual monopole. The characteristics of the proposed antenna is analyzed return loss and radiation patterns by the FDTD tools. As a result a bandwidth of proposed antenna has about 0.82GHz from 2.0 to 2.82[GHz] and 0.7GHz from 5.46 to 6.16[GHz]. It is used WLAN communications of 2[GHz] and 5[GHz].