• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3488-3493
• /
• 2022

Accelerator driven subcritical systems have long been discussed as facilities which can be used for solving the nuclear waste problem. The physics of these systems is very different from conventional reactors and new techniques had to be developed for reactivity monitoring. One such technique is the Area Ratio Method which studies the response of a subcritical system upon insertion of a large number of neutron pulses. An issue associated with this technique is the spatial dependence of measured reactivity which is intrinsic to the sub criticality of the system since the reactor does not operate on the fundamental mode and measured reactivity depends on the detector position. This is generally addressed by defining Bell-Glasstone spatial correction factor. This factor upon multiplication with measured reactivity gives the correct reactivity which is independent of detector location. Monte Carlo Methods are used for evaluating these factors. This paper presents a complete three dimensional map of spatial correction factors for BRAHMMA subcritical system. In addition, the dataset obtained also helps in identifying detector locations where the correction factor is close to unity, thereby implying no correction if the detector is used at those locations.

• Clinical and Experimental Pediatrics
• /
• v.50 no.3
• /
• pp.272-276
• /
• 2007

Purpose : Bell's palsy is defined as an idiopathic facial nerve paralysis of sudden onset. In spite of intensive clinical and experimental investigation, there is still uncertainty in the incidence, etiology, and preferred mode of treatment in children. The objective of this study was to analyze clinical outcome and prognosis of children with Bell' palsy. Methods : We analyzed 61 cases of Bell's palsy diagnosed at the Department of Wonkwang University Hospital from January 1998 to July 2006. The inclusion criteria were any children with acute isolated unilateral lower motor neuron type of facial nerve palsy. The clinical findings and investigations were reviewed including age, sex, affected site, seasonal incidence and result of steroid treatment. Chi-square and Fisher's exact test was used to compare clinical outcome between duration of complete recovery and age. Results : There was no difference in incidence according to sex or age. Incidence was higher in summer and winter. There was no difference in complete recovery rate and duration between steroid treated group and control group. In the group of children younger than 6 years, duration of complete recovery was shorter than older children. Conclusion : We found increasing the incidence of Bell's palsy in summer and winter. Children younger than 6 years had shorter duration in complete recovery.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.4
• /
• pp.39-46
• /
• 2007

In large pump station, vortex generation such as free-surface vortex and submerged vortex occurring around pump intake, or at bell-mouth inlet has been an important flow characteristics which should be considered always to keep away the suction of air-entrained or cavitated flow. In this study, a commercial CFD code was used to predict accurately the vortex generation for the specified intake design. These result shows the preliminary result of submerged vortex prediction for the Turbo-machinery Society of Japan Sump Test CFD standard model. At bottom wall, air volume fraction (red color) was found in a large scale to explain the submerged vortex generation at particular operation and configuration condition. And these indicate the free surface formation behind the bell mouth. Particularly, non-uniform approaching flow is a major parameter to govern the occurrence of the free-surface vortex. Futhermore the comparison between turbulence ($k-{\epsilon}$ & $k-{\omega}$ model) mode were executed in this study.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.397-403
• /
• 1989

A slight asymmetry exists in Korean beslls due to decorative sculptures, carved figures and casting irregularities. In this study, the influence of the asymmetry on the bell's best frequencies and mode shapes is studied by using finite element method and modal testing. Also measurement techniques of nodal lines and damping ratios of bells with very small beat frequencies are discussed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.9
• /
• pp.685-693
• /
• 2002

Analytical model of beat response is derived on a slightly asymmetric ring and the model is veryfied by experiment. The asymmetric ring is a simplified model used to explain the beat property of a Korean bell. The asymmetric ring has mode pairs having slight frequency difference in each radial mode. Each mode pair produces beat phenomenon by the interaction of the two close frequency components. Based on the analytical model, beat maps are first proposed and characteristics of beat on the circumference are detaily explained.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.365-371
• /
• 2008

In this study, beat control method using an equivalent ring model is proposed to control beat period of a slightly asymmetric ring. Slight asymmetry in a ring generates mode pair and the interaction of the mode pair makes beat in vibration and sound. In a ring, as a simplified bell type structure, mode data are measured and an equivalent ring is determined so that the measured mode condition is satisfied. By the finite element analysis on the equivalent ring, changes of mode pair condition are predicted when local mass is attached or the local thickness is decreased. The predicted results are compared with the experimental result and the validity of the proposed method is verified.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.222-228
• /
• 2009

This study compared the sound spectrums of pyeonjong remains and pyeonjong replica to investigate tuning ways of bells. pyeonjong remains, exhibited at King Sejong Memorial Museum and pyeonjong replica, played at the National Center for Korean Traditional Performance Arts were analyzed. To get mode frequencies and mode shapes, pyeonjong replicas' sound spectrums were analyzed and modal analyses by TV holography were performed. Also pyeonjong remains' sound spectrum were analyzed. Nominal frequencies on the pyeonjong replica and remains showed differences in a range between 9.8 cent and 203 cent. Two facts were inferred as causes of the differences, the tuning conditions of pyeonjong remains were not good and C4 in western tempered scale was preferred as the sound standard of Kukak, whangjong. Relative ratio of higher mode frequencies to the nominal frequencies were calculated to figure out tonal differences between two pyeonjongs. The differences in relative ratio of higher mode frequencies except (3,0)a and (3,0)b modes were significants as well as beyond the just noticeable difference. These results implied that the tonal differences between two pyeonjongs could exist. More pyeonjong remains are needed to be investigated to confirm this result in addition to the analyses of alloy components and bell structure of pyeonjong remains and replica.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.81-86
• /
• 1998

A 500Wh class high-speed Flywheel Energy Storage System (FESS) driven by a built-in BLDC motor/generator has been designed, which runs from 30000 to 60000rpm nominally. Due to the motor/generator inside, the flywheel rotor made of composites supported by PM/EM hybrid bearing system has a shape of bell or pendulum and thus requires accurate rotordynamic analysis and prediction of its dynamic behavior to secure the operating reliability. Rotordynamic analyses of the flywheel rotor-bearing system revealed that the bell shaped rotor has two conical rigid-body modes in the system operating range and the first conical mode, of which nodal point lies in the radial EM bearing position, can adversely affect the dynamic response of the rotor at the corresponding critical speed. To eliminate the possibility of wild behavior of the rotor, two guide bearings are adopted at the upper end of the rotor and motor/generator. It was also revealed that the EM bearing stiffness if 0.5~1.0E+6 N/m and damping of 2000 Ns/m are favirable for smooth operation of the system around the 2nd critical speed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.283-289
• /
• 1997

A 500Wh class high-speed Flywheel Energy Storage System (FESS) driven by a built-in BLDC motor/generator has been designed, which runs from 30000 to 60000rpm nominally. Due to the motor/generator inside, the flywheel rotor made of composites supported by PM/EM hybrid bearing system has a shape of bell or pendulum and thus requires accurate rotordynamic analyses and prediction of its dynamic behavior to secure the operating reliability. Rotordaynamic analyses of the flywheel rotor-bearing system revealed that the bell shaped rotor has two conical rigid-body modes in the system operating range and the first conical mode, of which nodal point lies in the radial EM bearing position, can adversely affect the dynamic response of the rotor at the corresponding critical speed. To eliminate the possibility of wild behavior of the rotor, two guide bearings are adopted at the upper end of the rotor and motor/generator. It was also revealed that the EM bearing stiffness of 0.5~1.0E+6 N/m and damping of 2000 Ns/m are favorable for smooth operation of the system around the 2nd critical speed.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.153-166
• /
• 1996

The purpose of this paper is to examine the Ethnic Fashion which is influenced by the Anti-Fashion in 1960s. Anti-Fashion as Hippie style had an effect on high fashion in the 60s-70s and which was restored in the early 90s are ethnic and folk-lore style. The influence that the Anti-Fashion has had on the Ethnic Fashion is summarized as follows. At the Ethnic Fashion in 60s-70s: First Europian romantic style that is velvet doublet breecheese race cuffs ruffle flounce race jabbot embrioderd blouse frilled blouse Victorian mode and Pre-Raphaello style. Second handicraft ornaments style & peasant style what are embroidery weaving variaty ornaments tie-dye patch work smocking beads & bell paisely print peasant blouse dundle skirt long skirt to clinging layered look floral print dress and shepherd-ness style. Third folklore style that is Oriental mao-suit harem pants & Indian pants caftan monk robe Afgan vest burnoos dhoti pants Hindu robe Red Indian fringe head band feather ornaments Red indian embroidery & weaving body painting gaucho poncho and serapi. At the Ethnic Fashion in 90s.: First Europian classical romantic style that is Victorian style Pre-Raphaello style ruffle & race decorations and velvet materials. Second peasant look& handicraft orna-ments what are floral print long skirt to cling-ing uneven stitches top stitchings patch work embroidery crochet and tie-dye. Third folklore style that is Red Indian style South East mode is sarong skirt & Nheru jacket Tibet & Mongolian style South America style and gypso style.