• 한국전자통신학회논문지
• /
• 제17권2호
• /
• pp.237-244
• /
• 2022

본 논문에서는 저층 고밀도 교외 환경에서 신호의 클러터 손실(Clutter loss)과 건물 인입 손실(Building entry loss)을 측정 후 분석했다. 선정된 환경에서 BEL, CL, BEL과 CL 결합 등 3가지 전파 모델을 측정하였다. 각 모델 측정 결과 바탕으로 BEL과 CL을 결합하였을 때의 수치를 분석했다. 각각 주파수에서 BEL과 CL 결합 측정값은 27.55dB 와 26.12dB 였으며, 계산값과 차이는 -4.19dB와 5.82dB였다. 측정이 건물 내부에서 이루어졌다는 점을 고려할 때 이러한 차이는 미미해 보인다. 따라서 BEL과 CL의 각각 측정값 합산과 결합 모델의 측정값을 비교하였을 때 -4.19dB와 5.82dB 오차를 도출하였고, 본 결과는 유사한 사례의 전파 모델 분석 시 참고 자료로 활용될 수 있을 것이다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E2호
• /
• pp.89-98
• /
• 2006

Two tobacco cultivars (Nicotiana tabacum L.), Bel-B and Bel-W3, tolerant and sensitive to ozone, respectively, were grown in a greenhouse supplied with charcoal filtered air and exposed to 200 ppb ozone for 4 hr. Effects on chlorophyll fluorescence, net photosynthesis, and stomatal conductance are described. Quantum yield was calculated from chlorophyll fluorescence and the initial slope of the assimilation-light curve measured by the gas exchange method. Only the sensitive cultivar, Bel-W3, developed visual injury symptoms on up to 50% of the $5^{th}$ leaf. The maximum net photosynthetic rate of ozone-treated plants was reduced 40% compared to control plants immediately after ozone fumigation in the tolerant cultivar; however, photosynthesis recovered by 24 hr post fumigation and remained at the same level as control plants. On the other hand, ozone exposure reduced maximum net photosynthesis up to 50%, with no recovery, in the sensitive cultivar apparently causing permanent damage to the photosystem. Reductions in apparent quantum efficiency, calculated from the assimilation-light curve, differed between cultivars. Bel-B showed an immediate depression of 14% compared to controls, whereas, Bel-W3 showed a 27% decline. Electron transport rate (ETR), at saturating light intensity, decreased 58% and 80% immediately after ozone treatment in Bel-B and Bel-W3, respectively. Quantum yield decreased 28% and 36% in Bel-B and Bel-W3, respectively. It can be concluded that ozone caused a greater relative decrease in linear electron transport than maximum net photosynthesis, suggesting greater damage to PSII than the carbon reduction cycle.

• Structural Engineering and Mechanics
• /
• 제64권3호
• /
• pp.323-328
• /
• 2017

This paper presents a three-dimensional finite element method analysis of repairing plate with bonded composite patch subjected to tensile load. The effect of the corrosion on the damage of the adhesive (FM73) in the length of two horizontal cracks on the both sides is presented. The obtained results show that the crack on the left side creates a very extensive area of the damaged zone and gives values of the stress intensity factor (SIF) higher than that on the right side. We can conclude that the left crack is more harmful (dangerous) than that on the right side.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.65-78
• /
• 2015

In recent years, implants have gained growing importance in all areas of medicine. The success of the treatment depends on many factors affecting the bone-implant, implant-abutment and abutment-prosthesis interfaces. In this paper, static and dynamic behaviors of the dental prosthesis are investigated. Three-dimensional finite element models of dental prosthesis were constructed. Dynamic loads in 5 sec applied on occlusal surface. Therefore, FEA was selected for use in this study to examine the effect of the static and dynamic loads on the stress distribution for an implant-supported fixed partial denture and supporting bone tissue.

• Journal of Applied and Pure Mathematics
• /
• 제5권3_4호
• /
• pp.211-222
• /
• 2023

In this paper, we study the following hybrid Caputo-Fabrizio fractional differential equation: ^𝐶𝓕_α𝕯^θ_ϑ [ω(ϑ) - 𝕱(ϑ, ω(ϑ))] = 𝕲(ϑ, ω(ϑ)), ϑ ∈ 𝕵 := [a, b], ω(α) = 𝜑_α ∈ ℝ, The result is based on a Dhage fixed point theorem in Banach algebra. Further, an example is provided for the justification of our main result.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.405-412
• /
• 2016

Bone is a living material with a complex hierarchical structure that gives it remarkable mechanical properties. Bone constantly undergoes mechanical. Its quality and resistance to fracture is constantly changing over time through the process of bone remodeling. Numerical modeling allows the study of the bone mechanical behavior and the prediction of different trauma caused by accidents without expose humans to real tests. The aim of this work is the modeling of the femur fracture under static solicitation to create a numerical model to simulate this element fracture. This modeling will contribute to improve the design of the indoor environment to be better safe for the passengers' transportation means. Results show that vertical loading leads to the femur neck fracture and horizontal loading leads to the fracture of the femur diaphysis. The isotropic consideration of the bone leads to bone fracture by crack propagation but the orthotropic consideration leads to the fragmentation of the bone.

• Journal of Plant Biotechnology
• /
• 제38권2호
• /
• pp.162-168
• /
• 2011

고염 스트레스는 식물의 성장과 수확량에 치명적인 영향을 야기한다. 그와 같은, 환경 스트레스에 의하여 식물은 다양한 유전자의 발현으로 저항성을 가지게 하는 기작이 발달되어 있다. 본 연구에서는 애기장대에서 다양한 환경 스트레스에 관여하는 유전자를 분리할 목적으로 GGM(Graphical Gaussian Model) program을 사용한 후, BLH8(BEL1-Like Homeodomain Gene 8) 유전자의 돌연변이 식물체를 구축하였다. atblh8-1 돌연변이체는 고농도의 $Na^+$과 $K^+$ 이온에 특이적으로 백화현상을 보이지만, 뿌리 성장에는 변화를 보이지 않았다. 그러므로, BLH8 단백질은 $Na^+$과 $K^+$과 같은 환경스트레스 저항성에 관여하는 중요한 인자임을 시사한다. 이와 같이, GGM program은 환경 스트레스에 관여하는 유전자를 분리하기 위한 유용한 도구일 것으로 사려된다.

• Wind and Structures
• /
• 제29권6호
• /
• pp.371-387
• /
• 2019

In the present paper, a simple refined nth-higher-order shear deformation theory is applied for the free vibration analysis of laminated composite plates. The proposed displacement field is based on a novel kinematic in which include the undetermined integral terms and contains only four unknowns, as against five or more in case of other higher-order theories. The present theory accounts for adequate distribution of the transverse shear strains through the plate thickness and satisfies the shear stress-free boundary conditions on the top and bottom surfaces of the plate, therefore, it does not require problem dependent shear correction factor. The governing equations of motion are derived from Hamilton's principle and solved via Navier-type to obtain closed form solutions. The numerical results of non-dimensional natural frequencies obtained by using the present theory are presented and compared with those of other theories available in the literature to verify the validity of present solutions. It can be concluded that the present refined theory is accurate and efficient in predicting the natural frequencies of isotropic, orthotropic and laminated composite plates.

• Structural Engineering and Mechanics
• /
• 제57권4호
• /
• pp.717-731
• /
• 2016

In orthopedic surgery and more especially in total arthroplastie of hip, the fixing of the implants generally takes place essentially by means of constituted surgical polymer cement. The damage of this materiel led to the fatal rupture and thus loosening of the prosthesis in total hip, the effect of over loading as the case of tripping of the patient during walking is one of the parameters that led to the damage of this binder. From this phenomenon we supposed that a remain of bone is included in the cement implantation. The object of this work is to study the effect of this bony inclusion in the zones where the outside conditions (loads and geometric shapes) can provoke the fracture of the cement and therefore the aseptic lousing of the prosthesis. In this study it was assumed the presence of two bones -type inclusions in this material, one after we analyzed the effect of interaction between these two inclusions damage of damage to this material. One have modeled the damage in the cement around this bone inclusion and estimate the crack length from the damaged cement zone in the acetabulum using the finite element method, for every position of the implant under the extreme effort undergone by the prosthesis. We noted that the most intense stress position is around the sharp corner of the bone fragment and the higher level of damage leads directly the fracture of the total prosthesis of the hip.

• Structural Engineering and Mechanics
• /
• 제59권1호
• /
• pp.123-132
• /
• 2016

Many military and commercial aging aircrafts flying beyond their design life may experience severe crack and corrosion damage, and thus lead to catastrophic failures. In this paper, were used in a finite element model to evaluate the effect of corrosion on the adhesive damage in bonded composite repair of aircraft structures. The damage zone theory was implemented in the finite element code in order to achieve this objective. In addition, the effect of the corrosion, on the repair efficiency. Four different patch shapes were chosen to analyze the adhesive damage: rectangular, trapezoidal, circular and elliptical. The modified damage zone theory was implemented in the FE code to evaluate the adhesive damage. The obtained results show that the adhesive damage localized on the level of corrosion and in the sides of patch, and the rectangular patch offers high safety it reduces considerably the risk of the adhesive failure.