• 멤브레인
• /
• 제25권3호
• /
• pp.287-294
• /
• 2015

태양전지는 태양복사에너지를 반도체의 광전효과를 통해 전기에너지로 변환시키는 친환경 에너지변환장치를 의미한다. 수분을 포함하는 다양한 화학물질들에 대한 높은 차단성을 갖는 다층형 필름인 백시트는 태양전지의 중요한 요소이다. 대표적인 백시트는 polyvinyl fluoride (PVF)와 poly(ethylene terephthalate) (PET)의 다층필름으로 구성된다. PVF는 높은 내후성을 가지는 반면, 가격이 상대적으로 비싼 단점을 보인다. 따라서, 백시트의 제조가격을 낮출 수 있으면서, 동시에 실제 태양전지모듈에 적용할만한 수명특성을 만족시킬 수 있는 대체소재의 개발이 필수적이다. 본 연구에서는 일정수준의 결정성을 갖는 PET 필름을 PVF 필름 대신 사용하였다. 그러나, PET 소재는 다양한 pH 조건에서 trans-esterification 및 가수분해에 의해 분해될 수 있기 때문에, 태양전지의 구동조건에서 PET의 분해거동을 이해할 필요가 있다. 단시간 내 화학적 분해거동을 평가하기 위해서, 가속화된 PET 분해실험 프로토콜이 개발되었다. 마지막으로, 제안 개념의 효용성은 태양전지모듈의 장기운전성능 평가를 통해 확인하였다.

• Composites Research
• /
• 제35권6호
• /
• pp.394-401
• /
• 2022

Polyvinylidene chloride-resin(PVDC-resin)와 polyvinylidene fluoride(PVDF)의 두 폴리머 전구체는 열분해 과정을 통해 마이크로 다공성 탄소로 변환되어 되므로 이온 흡/탈착으로 전하를 저장하는 슈퍼커패시터용 전극재료로 유리하다. 더욱이, 두 전구체를 구성하는 여러가지 이종원소들은 탄화 후 작용기를 형성하여 추가적인 전하저장에 기여할 수 있으므로, 탄화 시 생성되는 작용기에 대한 분석은 에너지 저장용 탄소소재를 개발하는데 중요하다. 본 연구에서는 두 폴리머 전구체를 탄화시킨 후 생성된 작용기를 X-선 광전자 분광법(X-ray photoelectron spectroscopy)과 다양한 pH의 전해질에서 탄소 전극의 전기화학 거동 관찰을 통하여 확인하였다. 산성(1 M H₂SO₄) 전해질에서 측정된 두 탄소 전극의 비전기용량은 생성된 quinone 작용기의 패러데익 충/방전 반응 덕분에 중성 전해질(0.5 M Na₂SO₄)에서보다 증가하였다. 특히, PVDC-resin으로부터 합성된 탄소는 매우 작은 마이크로 기공이 표면에 형성되어 있어 전해질 이온의 흡착을 어렵게 하므로, PVDF로부터 합성된 탄소 전극에 비해 낮은 용량을 보인다. 염기성 전해질(6 M KOH)에서 두 탄소 전극 모두 3가지 전해질 중 가장 높은 비전기용량이 측정되었는데, 이는 구성하는 전해질 이온들(K⁺, OH^-)이 두 탄소에 형성된 마이크로 기공으로 흡/탈착이 용이하게 일어나는 동시에 패러데익 충/방전 반응으로 추가적인 전하가 저장되었기 때문이다.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.188-194
• /
• 2003

Phase behavior and spinodal phase separation kinetics in binary blends of a random copolymer of vinylidene fluoride and trifluoroethylene (75/25) [P(VDF/TrFE)] and poly(l,4-butylene adipate) (PBA) have been investigated by means of optical microscopic observation and time-resolved light scattering. The blends exhibited a typical lower critical solution temperature (LCST)∼${34}^{\circ}C$ above the melting temperature of the P(VDF/TrFE) crystals over the entire blend composition range. P(VDF/TrFE) and PBA were totally miscible in the temperature gap between the melting point of P(VDF/TrFE) and the LCST. Temperature jump experiments of the 3/7 P(VDF/TrFE)/PBA blend were carried out on a light-scattering apparatus from a single-phase melt state (${180}^{\circ}C$) to a two-phase region (205∼${215}^{\circ}C$). Since the late stage of spinodal decomposition (SD) is prevalent in the 3/7 blend, SD was analyzed using a power law scheme. Self-similarity was preserved well in the late stage of SD in the 3/7 blend.

• 대한치위생과학회지
• /
• 제3권2호
• /
• pp.1-8
• /
• 2020

This study investigated the relationship between oral health knowledge, behavior and orthodontic satisfaction in orthodontic patients visiting dental hospitals and clinics and provided suggestions to improve orthodontic patients' satisfaction. This study anayzed structured self-administered questionnaires collected from 245 patients who visited 5 dental clinics in Gwangju Metropolitan City. Regarding oral health knowledge, the highest percentage of correct answers was for the item "Cavities heal themselves over time" (97.1%), and the lowest percentage of correct answers was for the item "Cavity bacteria move from tooth to tooth" (16.7%). Five fluoride items showed a lower percentage of correct answers than those for cavity and gingival diseases. Regarding the survey on oral health behavior, the highest score was found for the item "I brush my teeth with a certain method and order" (3.78 out of 5), and the lowest score was found for the item "I use an electric toothbrush" (1.34 out of 5). Regarding the survey on orthodontic satisfaction, the highest score was found for the item "I would recommend receiving medical treatment at the department of orthodontics" (4.23), and the lowest score was found for the item "Orthodontic cost is reasonable" (3.46). While oral health behavior had on orthodontic satisfaction, oral health knowledge had no effect on it. Oral health behaviors should be improved to enhance orthodontic satisfaction. To improve oral health behavior, it is necessary to develop and activate education programs for tooth brushing and oral care for orthodontic patients.

• 보건의료산업학회지
• /
• 제8권4호
• /
• pp.141-147
• /
• 2014

Dental clinic programs for elementary school children to live healthy life by promote healthy lives by oral health self-management skills. This study on schools with and without dental clinics compared and analyze teacher's knowledge of and attitudes toward oral care and determines whether or not to recommend the school dental clinic program. The subjects of the study were 239 teachers in schools with dental clinics and 201 teachers in schools without dental clinics. In total, the study included 20 schools and 440 teachers. Teachers from schools with dental clinics had a higher recognition rate of the purpose of tooth brushing and the fluoride caries preventive effect than teachers from schools without dental clinics. However, there was no significant difference between schools with and without dental clinics when we compared the daily tooth brushing frequency and oral health attitude. There is also need of a school dental clinic program for teachers because if teachers lack knowledge and professionalism of oral health it will affect the student's oral health attitudes.

• 한국치위생학회지
• /
• 제14권2호
• /
• pp.173-179
• /
• 2014

Objectives : The purpose of this study is to provide the basic data for the development of oral health education program and to make schoolchildren practice the right oral health care behaviors. Methods : Data were collected from 259 elementary school students including 134 boys and 125 girls in Busan from November 26 to December 20, 2012. The groups were tooth brushing group and dental clinic group. All statistical analyses were analyzed by frequency analysis and chi-square test using SPSS 18.0 program. Results : School dental clinic group showed higher awareness level of fluoride and sealant effect of prevention(p=0.000). Toothbrushing facility group showed higher awareness level of brushing tooth(p=0.011). School dental clinic group showed higher awareness level of fluoride toothpaste(p=0.000). Both school dental clinic group and toothbrushing facility group showed higher awareness level of oral health education(p=0.001). School dental clinic group showed higher awareness level for tooth brushing method after education(p=0.000). Both school dental clinic group and toothbrushing facility group showed higher level of education. Conclusions : School dental clinic group showed higher level for oral health knowledge and toothbushing facility group showed high level for oral health behavior. Both School dental clinic group and toothbrushing facility group showed higher level of oral health education and tooth brushing method after education. Both school dental clinic group and toothbrushing facility group proved to promote oral health. Activation of school toothbrushing facility is very important to change the oral health workforce.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.169-170
• /
• 2006

In this study, ultra thin films of ferroelectric vinylidene fluoride-trifluoroethylene (VF2-TrFE) copolymer were fabricated on degenerated Si (n+, $0.002\;{\Omega}{\cdot}cm$) using by spin coating method. A 1~5 wt% diluted solution of purified vinylidene fluoride-trifluoroethylene (VF2:TrFE=70:30) in a dimethylformamide (DMF) solvent were prepared and deposited on silicon wafers at a spin rate of 2000~5000rpm for 30 seconds. After annealing in a vacuum ambient at $200^{\circ}C$ for 60 min, upper gold electrodes were deposited by vacuum evaporation for electrical measurement. X-ray diffraction results showed that the VF2-TrFE films on Si substrates had $\beta$-phase of copolymer structures. The capacitance on $n^+$-Si(100) wafer showed hysteresis behavior like a butterfly shape and this result indicates clearly that the dielectric films have ferroelectric properties. The typical measured remnant polarization (2Pr) and coercive filed (EC) values measured using a computer controlled a RT-66A standardized ferroelectric test system (Radiant Technologies) were about $0.54\;C/cm^2$ and 172 kV/cm, respectively, in an applied electric field of ${\pm}0.75\;MV/cm$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.388-388
• /
• 2010

In this study, Ferroelectric vinylidene fluoride-trifluoroethylene (VF2-TrFE) copolymer films were directly deposited on degenerated Si (n+, $0.002\;{\Omega}{\cdot}cm$) using by spin coating method. A 1~5 wt% diluted solution of purified vinylidene fluoride-trifluoroethylene (VF2:TrFE = 70:30) in a dimethylformamide (DMF) solvent were prepared and deposited on silicon wafers at a spin rate of 2000 ~ 4000 rpm for 2 ~ 30 seconds. After annealing in a vacuum ambient at 100 ~ $200^{\circ}C$ for 60 min, upper aluminum electrodes were deposited by vacuum evaporation for electrical measurement. X-ray diffraction results showed that the VF2-TrFE films on Si substrates had $\beta$-phase of copolymer structures. The capacitance on highly doped Si wafer showed hysteresis behavior like a butterfly shape and this result indicates clearly that the copolymer films have ferroelectric properties. The typical measured remnant polarization ($P_r$) and coercive filed ($E_c$) values were about $5.7\;{\mu}C/cm^2$ and 710 kV/em, respectively, in an applied electric field of ${\pm}$ 1.5 MV/em. The gate leakage current densities measured at room temperature was less than $7{\times}10^{-7}\; A/cm^2$ under a field of 1 MV/cm.

• 비파괴검사학회지
• /
• 제31권5호
• /
• pp.522-528
• /
• 2011

인간의 청각기능을 보조하거나 대체할 수 있는 차세대 인공와우기술의 개발은 기존 인공와우의 단점인 잦은 충전, 장애 노출 등을 극복하고 향상된 음감을 전달할 수 있는 기술로서 세계적으로 많은 연구를 수행하고 있다. 본 연구에서는 달팽이관의 기저막이 갖는 주파수 분리 기능 및 유모세포(haircell)의 이온채널 작용에 의한 생체 전기신호 발생 기능을 할 수 있는 PVDF(polyvinylidene fluoride) 압전 박막형 인공기저막을 설계, 제작 및 시험평가를 하고자 하였다. 생체 기저막과 유사한 주파수 분리 특성을 갖는 사다리꼴 형상의 인공기저막을 제작하고, MEMS 공정을 이용한 전극 증착 및 유체 유동이 가능한 챔버를 형성하였다. 또한 인공기저막의 거동을 측정하기 위하여 비접촉 LDV측정 장비, 스피커, 기준 마이크로폰 등을 사용하여 실험 장치를 구성하였다. 기계적 성능시험 결과, PVDF 압전박막형 인공기저막은 입사하는 음파의 주파수 분리를 잘 수행할 수 있음을 실험적으로 입증하였다.

• 접착 및 계면
• /
• 제16권3호
• /
• pp.116-121
• /
• 2015

본 연구에서는 발수성 재료로 쓰이고 상대적으로 가격이 비싼 불소계 실란을 대체하기 위해 octadecyltrichlorosilane (OTS)을 사용하였다. 코팅층의 기계적 접착강도를 향상시키기 위해 무기바인더를 산 촉매 하에서 졸-겔 반응에 의해 분산시켜 합성하였다. 합성된 실리카 나노입자는 나노크기의 거칠기를 제공하기 때문에 초소수성을 쉽게 얻기 어려우므로 유기용매에 의한 입자의 응집을 유도하였다. 실리카 나노입자의 적절한 크기 선택에 따라 OTS를 사용해서 표면을 소수화 시킨 후 유기용매의 양이 증가함에 따라 초소수성의 표면을 얻었고 극도의 물 반발 거동이 zero sliding angle과 함께 관찰되었다. 이러한 초소수성은 용매와의 혼합과 상관없이 유전상수가 25보다 작은 값을 가졌으며 용매 내에서 입자의 응집을 통해 유도된 초소수성 표면을 제조하는 것이 저유전상수 값에 대한 지표가 되었다.