• Computers and Concrete
• /
• 제24권6호
• /
• pp.579-586
• /
• 2019

In this research paper, the free vibrational behavior of the simply supported FG nano-plate is studied using the nonlocal two variables integral refined plate theory. The present model takes into account the small scale effect. The effective's properties of the plate change according to the power law variation (P-FGM). The equations of motion of the system are determined and resolved via Hamilton's principle and Navier procedure, respectively. The validity and efficiency of the current model are confirmed by comparing the results with those given in the literature. At the last section, several numerical results are presented to show the various parameters influencing the vibrational behavior such as the small-scale effect, geometry ratio, material index and aspect ratio.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.477-484
• /
• 2005

Model fer the dynamic simulation of dynamic behaviors of a solid oxide fuel cell (SOFC) is provided. This model is based upon (1) coupled mass and heat transfer characteristics and (2) important chemical reactions such as electrochemical and reforming reactions in high temperature fuel cells such as SOFC. It is found that the thermal inertia of solid materials in SOFC plays an important role to the dynamic behavior of cell temperature. Dynamic characteristics of cell voltage, power, and chemical compositions with different levels of load change are investigated.

• Smart Structures and Systems
• /
• 제22권6호
• /
• pp.643-662
• /
• 2018

One of the methods for investigation of mechanical behavior of materials is numerical simulation. For simulation, its need to model behavior is close to real condition. PFC is one of the rock mechanics software that needs calibration for models simulation. The calibration was performed based on simulation of unconfined compression test and Brazilian test. Indeed the micro parameter of models change so that the UCS and Brazilian test results in numerical simulation be close to experimental one. In this paper, the effect of four micro parameters has been investigated on the uniaxial compression test and Brazilian test. These micro parameters are friction angle, Accumulation factor, expansion coefficient and disc distance. The results show that these micro parameters affect the failure pattern in UCS and Brazilian test. Also compressive strength and tensile strength are controlled by failure pattern.

• 마이크로전자및패키징학회지
• /
• 제17권2호
• /
• pp.21-28
• /
• 2010

본 논문에서는 온도 사이클이 진행되는 동안 비선형 거동과 크립 거동을 보이는 FC-PBGA 패키지 솔더볼의 변형거동을 알아보기 위하여 시간에 종속하는 거동을 적용 시킬 수 있는 점소성 모델과 크립 모델에 대하여 유한요소해석을 수행하였다. 유한요소해석 결과의 신뢰성을 평가하기 위하여 무아레 간섭계를 이용하여 온도변화에 따른 열변형 실험을 수행하였다. 전체적인 굽힘변위는 Anand 모델과 변형률 분리 모델 모두 실험결과와 잘 일치하였으나 솔더볼의 변형률은 Anand 모델의 경우 큰 차이를 보이고 변형률 분리 모델의 경우 상당히 일치하는 계산결과를 얻었다. 따라서 본 논문에서는 변형률 분리 모델을 이용하여 시간에 종속하는 FC-PBGA 패키지 솔더볼의 크립 거동을 검토하였다. 솔더를 포함한 패키지에 온도변화가 생길 때 고온에서는 시간이 지남에 따라 크립 거동에 의해 솔더의 응력이 점차 완화되는 현상을 나타내고 있음을 알 수 있었다.

• Asia pacific journal of information systems
• /
• 제17권1호
• /
• pp.1-31
• /
• 2007

This research proposes a conceptual framework to highlight the importance of change management after firms implement ERP systems. With ERP, firms need to rework their business processes to make information flow smoothly within organizations. Firms cannot realize expected returns from ERP investments unless changes are effectively managed after ERP systems are put into operation. The research model is empirically tested using data collected from over 170 firms that had used ERP systems at least for more than one year. Our analysis reveals that the eventual success of ERP systems depends on effective change management after ERP implementation, supporting the existence of the 'valley of despair.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.77-87
• /
• 2006

It is necessary to change the existing design process to cope with a short life-cycle product and various customer's demands. Also a frequent design change may delay the whole design process and it will increase the unit cost of the production. New alternatives or techniques have emerged to solve the existing design problems, such as a knowledge based engineering, an intelligent CAD, a function based design, and so on. In this paper, we propose a hybrid design system with a knowledge based design methodology and a function based design technique. The knowledge based design is good at a frequent design change and the function based design is effective to extract a core design behavior. In an early design process, the system utilizes a core design behavior through the function based design process. On the other hand, the system manages complicated design issues with the knowledge based design technique in the detailed design process. We conclude that the hybrid design system can bring fair effects on implementing an efficient design environment in aspect of time and expense.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1812-1818
• /
• 2005

Even though SMA actuators have high power to volume ratio, there exist disadvantages such as hysteresis and saturation. So the model identification for SMA actuators is very difficult. For the qualitative model identification, we described the behavior of SMA actuators using a so-called diagonal model, which can readily expect the turning point of an incomplete phase transformation. For the quantitative model identification, we developed the general dynamics of SMA actuators using the modified Liang's model. Using this dynamics we can describe the hysteresis and the saturation very well. It is also very important to notice that the modified Liang's model maintains a continuous martensite fraction at the change of the phase transformation but the original model cannot.

• 소성∙가공
• /
• 제22권8호
• /
• pp.450-455
• /
• 2013

In the current study, a new dynamic recrystallization model for predicting high temperature flow stress is developed based on a physical model and the mean field theory. In the model, the grain aggregate is assumed as a representative volume element to describe dynamic recrystallization. The flow stress and microstructure during dynamic recrystallization were calculated using three sub-models for work hardening, for nucleation and for growth. In the case of work hardening, a single parameter dislocation density model was used to calculate change of dislocation density and stress in the grains. For modeling nucleation, the nucleation criterion developed was based on the grain boundary bulge mechanism and a constant nucleation rate was assumed. Conventional rate theory was used for describing growth. The flow stress behavior of pure copper was investigated using the model and compared with experimental findings. Simulated results by cellular automata were used for validating the model.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.36-48
• /
• 1999

Fatigue life and crack retardation behavior after penetration were experimentally examined using surface pre-cracked specimens of aluminium alloy 5083. The Wheeler model retardation parameter was used successfully to predict crack growth behavior after penetration. By using a crack propagation rule, the change in crack shape after penetration can be evaluated quantitatively. Advanced, waveform-based acoustic emission (AE) techniques have been successfully used to evaluate signal characteristics obtained form fatigue crack propagation and penetratin behavior in 6061 aluminum plate with surface crack under fatigue stress. Surface defects in the structural members are apt to be origins of fatigue crack growth, which may cause serious failure of the whole structure. The nondestructive analysis on the crack growth and penetration from these defects may, therefore, be one of the most important subjects on the reliability of the leak before break (LBB) design. The goal of the present study is to determine if different sources of the AE could be identified by characteristics of the waveforms produced from the crack growth and penetration. AE signals detected in four stages were found to have different signal per stage. With analysis of waveform and power spectrum in 6061 aluminum alloys with a surface crack, it is found to be capabilities on real-time monitoring for the crack propagation and penetration behavior of various damages and defects in structural members.

• 대한간호학회지
• /
• 제36권2호
• /
• pp.330-340
• /
• 2006

Purpose: This study was performed to investigate the factors influencing health behavior. Method: Data used in this study was drawn from a 2001 National Health survey done by Korea Institute for Health and Social Affairs. Number of samples were 5,085 people between age 20 years and 69 years in whole country. In this study, we modified Green and Kreuter's Precede-Proceed model to analyse influence of factors in health behavior, Hierarchical regression were used in the analysis. Result: 1) Factors that had statistically significant positive relation with overall health behavior were age, educational level, income level, disease in the family, medical examination, subjective weight, and concern about health, 2) Factors that had statistically significant negative relation with overall health behavior were sex, subjective health, stress, and degree of physical activity. Conclusion: 1) It would be necessary to set the target group for the health promotion in advance. 2) It was very important to adopt easy and efficient methods to change the health behavior of target group, for example, ability to control stress.