• Mycobiology
• /
• v.31 no.1
• /
• pp.54-56
• /
• 2003

Perforated vinyl mulching technique was performed on Pleurotus sajor-caju beds to assess fruitbody formation. Individual fruitbody of P. sajor-caju was transformed into bunch type on vinyl mulching bed. It was effective to grow the mushroom without waterlogging and abortion of small pins on the beds as well as hygienical bed management. A bunch showed 79 fruitbodies and 225 g of weight. Available site for fruiting was reduced up to 20% in comparison of 100% for conventional bed. The color of fruitbody turned on brownish white from treated vinyl mulching bed.

• Journal of the Korean Society of Combustion
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2011

340 MWe circulating fluidized bed (CFB) boiler in Yeosu power station is under construction. The circulating fluidized bed boiler in the Yeosu power plant has a number of differences from other domestic boilers in terms of scale and design. Evaluation of design parameters of the Yeosu CFB boiler should be required because the direct application of existing technology is limited. In this study, design characteristics of the Yeosu CFB boiler was summarized. And thermogravimetric analysis was conducted with comparing other rank coals. Watersteam side heat absorption, flue gas temperature and heat transfer coefficient were calculated by heat and mass balance. Design parameters for the Yeosu CFB boiler were discussed along with typical value in the CFB design range.

• Journal of the Korean Society of Combustion
• /
• v.1 no.1
• /
• pp.1-10
• /
• 1996

An effective scale-up methodology of fluidized bed incinerators for low calorific value industrial wastes such as paper sludge and sewage sludge has been developed based on the similarity rules. Conventional scale-up theories are briefly reviewed and a new simple theory defining the diffusion Fourier number is established taking account of the lateral mixing of fuels in the fluidized bed. From the design and the operating conditions of the pilot FBC plant at Inchon, important design data for the full-scale incinerators are calculated and discussed.

• Journal of Mushroom
• /
• v.2 no.1
• /
• pp.42-43
• /
• 2004

Labor required for managing and harvesting the oyster mushroom bed was evaluated. Although vinyl mulching cultivation method needs more hours for spawning, it saves more than 50% of labor for harvesting and managing of the mushroom bed. Harvesting hour of 1st-3rd flush in vinyl mulching method was 48~50% for Plerutus ostreatus and 36~41% for P. sajor-caju. Labor for bed management after harvesting in vinyl mulching method was also 38~50% for P. ostreatus compared to conventional method, and 20~35% for P. sajor-caju. Vinyl mulching is believed to be a very efficient method for saving labor in oyster mushroom cultivation.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.181-188
• /
• 2006

Operation parameters for large scale industrial facility such as iron making plant are carefully selected through elaborate tests and monitoring rather than through a mathematical modeling. One of the recent progresses for better energy utilization in iron ore sintering process is the distribution pattern of fuel inside a macro particle which is formed with fines of iron ore, coke and limestone. Results of model tests which have been used as a basis for the improved operation in the field are introduced and a theoretical modeling study is presented to supplement the experiment-based approach with fundamental arguments of physical modeling, which enables predictive computation beyond the limited region of tests and adjustment. A single fuel particle model along with one-dimensional bed combustion model of solid particles are utilized, and thermal processes of combustion and heat transfer are found to be dominant consideration in the discussions of productivity and energy utilization in the sintering process.

• The Korean Journal of Food And Nutrition
• /
• v.4 no.2
• /
• pp.141-148
• /
• 1991

In order to Investigate the extraction mechanism of barley tea in cylindrical packed column, pilot plant scale packed column was designed and constructed. And extraction conditions for steady flow in the packed column were searched. The main results of this study are as follows ; 1. Circulation of the stock barley tea before the extraction running was indispensable In consideration of inequality, gas, particles existed in packed bed. Solid-liquid equilibrium was initially maintained after the circulation. 2. Flow direction of solvent must be up-flow for maintaining the constant bed height and flow rate during the extraction. Paessure drop in pucked bed was similar to decrease ratio of extract concentration. 3. The porosity of packed bed was in the range of 0.24∼0.36 according to the particle sloe. And it was decreased as the particle size became smaller.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.123-129
• /
• 2010

A study on modeling of medium temperature drops of the elevated-bench hydroponic system for strawberry cultivation during low temperature season was conducted. Four different conditions were used for the experiment. These consisted of two kinds of bed types (plant, V), four kinds of medium (rice, perlite, rice hulls80% and peatmoss20%, perlite80% and peatmoss20%), two kinds of mulched bed (mulched, non mulched) and four kinds of greenhouse air temperature (l.5, 3.2, 5.0, $6.7^{\circ}C$), and the results were summarized as follows: Temperature drop of medium in the V-bed was slower than that in the plant bed, showing better insulation effect of V-bed. Temperature drop of medium with mulching on the top of the bed was slower than the case without mulching, as a result, the beneficial effect of temperature drop was appeared in mulched bed. Linear regression of the temperature descent rate and the temperature difference between medium and air showed significant correlation. The regression equation for the Pearlite80% and Peatmoss20% in the V-bed was f(x) = -0.2656 + 0.1345x at the $R^2$ of 0.9269. Using the model, the temperature drop during night can be predicted for the various media at the different depths.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.243-243
• /
• 2017

Leaf colors of rice can be used to identify stress level due to its adaptation to environmental change. For most leaves green-related colors are sourced from chlorophyll a and b. For most leaves green-related colors are consisted of chlorophyll a and b. Chlorophyll concentration is normally measured using a spectrophotometer in laboratory. In some remote observation fields, it is impossible to collect the leaves, preserve them, and bring them to laboratory to measure their chlorophyll content. The measurement of chlorophyll content is observed through its color. Using CIE chromaticity diagram leaf color information in RGB is transformed into wavelength (in nm). Pheophytin contents were also analyzed in 95% ethanol extracts. In the process of leaf development of rice young seedling, both pigments were compared. Leaf samples from different rice seedling bed is taken, their colors and RGB values are recorded using Photoshop Image Analysis. SPAD-502 values were also measured. The chlorophyll and Pheophytin contents were fully estimated by ${\rightthreetimes}_{avg}$ on CIE chromaticity diagram.

• Journal of the Korean Society of Combustion
• /
• v.16 no.4
• /
• pp.23-30
• /
• 2011

In the iron and steel manufacturing, sintering process precedes blast furnace to prepare feed materials by agglomerating powdered iron ore to form larger particles. There are several techniques which have devised to improve sintering production and productivity including flue gas recirculation(FGR) and additive gas enriched operation. The application of those techniques incurs variations of process configurations as well as inlet and outlet gas conditions such as temperature, composition, and flow rate which exert direct influence on reactions in the bed or the operation of the entire plant. In this study, an approach of sintering bed modeling using flowsheet process simulator was devised in consideration of FGR and the change of incoming and outgoing gas conditions. Results of modeling for both normal and FGR sintering process were compared in terms of outgoing gas temperature, concentration, and moisture distribution pattern as well as incoming gas conditions. It is expected to expand the model for various process configurations with FGR, which may provide the usefulness for design and operation of sintering plant with FGR.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.163-172
• /
• 2014

To investigate the possibility of developing the seeding measure for river bank slope revegetation, germination experiment and early growth observation were conducted using 3 native species growing naturally around river banks such as Pennisetum alopecuroides, Phragmites communis, and Miscanthus sinensis. The applied seeding methods were 3 such as scattering seeds, tillage after scattering seeds, and covering up seed with soil after scattering seeds. According to seeding methods, germination experiment and early growth observation were carried out on nursery bed soil in greenhouse. As results of this study, all the 3 native plant species' germination ratio and growth in length on nursery bed soil were highest on the seeding method of covering up seed with soil. Also it was verified by Duncan's multiple range test that the germination ratio and growth in length on the seeding method of covering up seed with soil is distinguished from those on other two seeding methods. According to this results, the best possible seeding measure to be developed should be mechanical seed spraying with soil.