• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.106-115
• /
• 2013

A series of fishing experiments were carried out in the western coastal waters of Korea from May, 2006 to September, 2007, using gill nets of different mesh sizes (m=101, 121.8, 152.5, 176.8, and 191 mm) to determine the mesh selectivity of gill net for swimming crab, Potunus trituberculatus. The catch species was composed of swimming crab (87%), Thomas's rapa whelk Rapana venosa (5%), arthritic neptune Neptunea cumingi (2%), Japanese swimming crab Charybdis japonica (2%), marbled sole Pleuronectes yokohamae (1%), pen shell Atrina pectinata, ocellate spot skate Okamejei kenojei, and so on. The carapace length (CL) of each swimming crab caught in the experimental nets was measured. Sponge crab (egg-bearing female crab) was appeared from the end of June to August in the coastal waters. The master selection curve was estimated by applying the extended Kitahara's method. The selection curve showed that the gill nets of larger mesh size allowed more crabs of small carapace size to escape. The optimum value (CL/m) was 0.645 and the CL/m was estimated to be 0.301, 0.354, 0.391, 0.422, and 0.450 when the retention probabilities were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively.

• Journal of Embryo Transfer
• /
• v.30 no.2
• /
• pp.73-82
• /
• 2015

This study was designed to evaluate the possibility of increase through dairy female offspring's ratio by transfer of pre-selected transferrable blastocyst that was produced by pre-selected X-bearing semen with OPU derived oocytes. Elite dairy female cow is demanded strongly compared with male, the so called, farmer wants to produce only an elite female dairy offspring as a candidate female dairy cow for producing milk. In our study, we selected 2 elite dairy bull semen from National Agricultural Cooperative Federation to pre-select X-bearing semen and 5 elite dairy female cows as donor for collecting of OPU derived oocytes. OPU derived embryo production system was carried out an aspiration of immature oocytes from 5 donor cows 2 times per week, total 200 times for 2 to 7 months by an ultrasonographic guided follicular aspiration system and then produced in vitro-produced blastocysts by in vitro maturation, fertilization and culture. Dairy donor semen selected H-319, 320 bull in National Agricultural Cooperative federation was sorted X-bearing semen by flow-cytometer and frozen for using IVF with OPU derived oocytes. Donor cows were selected 5 elite dairy cows from Gyeongju Dairy Cow Community and then disease tests such as 4 kinds of disease before selecting was checked. Oocyte proportion of grade 1 to 3 from total collected oocytes was significantly lower in donor A and B than those in donor C, D and E (82.16 and 70.03% vs. 90.0, 91.78 and 93.57%), respectively (p<0.05). However, number of oocytes per session in donor A, C and E was significantly higher than those in donor B and D ($7.77{\pm}3.26$, $5.85{\pm}2.10$ and $7.03{\pm}2.14$ vs. $4.68{\pm}2.61$ and $5.21{\pm}1.97$ oocytes), but donor A was significantly higher than donor C (p<0.05). Development to blastocyst in donor B, C and E was significantly higher than those in donor A and D (31.0, 25.0 and 25.0% vs. 14.3 and 4.5%), but donor A was not different in donor C and E (p<0.05). Nine out of 10 blastocysts (90.0%) derived from OPU blastocysts were confirmed male embryos that was induced with Y-bearing semen to confirm sex ratio only. Total 96 blastocysts derived from female bearing semen were transferred into synchronized recipients and then confirmed 42 recipients (43.8%) pregnancy rate, 36 offspring (37.5%) and 91.7% female sex ratio (33 female vs. 3 male offspring). Taken together all data, elite dairy female offspring could be produced effectively by in vitro production system between pre-selected x-bearing semen and OPU derived oocytes that would be influential breeder in the breeding of dairy farm to increase effectively elite dairy offspring ratio as well as net income in the dairy farmer.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.5-9
• /
• 2003

Conventional variable-speed Induction motor drives with inverters are subject to detrimental effect of zero-sequence voltages, such a shaft voltage and bearing current. This paper presents a way of the suppression of the zero-sequence components in multilevel H-bridge inverters. First examined Is the inherent zero-sequence characteristic of the conventional subharmonic PW method. Then it is shown that the zero-sequence voltage can be eliminated with proper -selection of switching states with space vector modulation. Although this method alone restricts the linear modulation range of control, a combination of the proposed method and the minimum switching method appears to be effective in suppressing the zero-sequence voltage to minimum level while maintaining the linear control range.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.116-121
• /
• 2010

For over a decade, research and development on submerged hardware in continuous galvanizing pots has been carried out at Teck's Product Technology Centre. The outcome of numerous laboratory tests and field trials has demonstrated that dissimilar materials with comparable surface hardness are most suitable for the manufacture of roll bearings. Wear debris can be easily retained in bearings made of the same material, thereby negatively affecting bearing performance and service life. Bearings made of the same materials are also vulnerable to catastrophic failures. The dissolution of iron from the coated strip creates an iron-rich zone associated with a high concentration gradient in the vicinity of the sink roll. Consequently, the sink roll becomes a preferential site for dross pick-up. In operations involving extremely high temperatures, such as in Galvalume production, the material selection for pot hardware is immaterial to the final corrosion product of the hardware and the pick-up on the hardware.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1233-1240
• /
• 2004

Condition monitoring and fault diagnosis of machines are gaining importance in the industry because of the need to increase reliability and to decrease possible loss of production due to machine breakdown. By comparing the nitration signals of a machine running in normal and faulty conditions, detection of faults like mass unbalance, shaft misalignment and bearing defects is possible. This paper presents a novel approach for applying the fault diagnosis of rotating machinery. To detect multiple faults in rotating machinery, a feature selection method and support vector machine (SVM) based multi-class classifier are constructed and used in the faults diagnosis. The results in experiments prove that fault types can be diagnosed by the above method.

• Advances in concrete construction
• /
• v.10 no.4
• /
• pp.333-343
• /
• 2020

In the architectural design process, the selection and configuration of the structural system significantly affect the earthquake behaviours of the reinforced concrete buildings. The main purpose of this study, the effects on the earthquake performances and the rough construction cost of the buildings of the slab type in reinforced concrete buildings are to examine comparatively for different local soil classes. The results obtained from this study have been determined that the building model having slabs with beams is safer compared to other types of slabs, especially when considering the vertical bearing structural elements (columns). It also shows that other types of slab, except for slab with beams, reduce the earthquake performances of reinforced concrete buildings, increase the displacement values, 1st natural vibration period values and the cost of rough construction. This matter reveals that slab type is quite important and the preference of beamed slabs in reinforced concrete buildings to be constructed in earthquake zones would be more appropriate in terms of safety and cost.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.974-979
• /
• 2004

Recently, the development of paved track is required as a Low-maintenance of conventional line. The most important factor of paved track is stability and applicability. In this method, the ballast is grouted with mortar so that the ballast can turn into a structure like slab. This method can be subdivided into the followings. One is the method with switching the ballast, and the other is without switching the ballast. The ordinary and actual states of the ballast and roadbed were investigated to evaluate the applicability of the paved track structure in this study, and various In-situ tests were applied. Non-destructive tests such as GPR, SASW, FWD were used, and bearing capacity of roadbed, depth of the ballast, and deterioration, penetration, and contamination of the ballast were focused. The result of this investigation was utilized in the selection of optimal paved track structure and data for preliminary design.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.7-14
• /
• 2002

In order to achieve high precision machine tools, the research for performance enhancement of feed drive systems is required. Development of the high speed feed drive system has been a major issue for the past few decades in machine tool indestries. Because table levitation system decrease the table weight, an effect of reaction by weight is minimized and lost motion can be removed at maximum. In case fled system is designed with drive motor, ball screw and support bearing load capacity selection, an effect of decrease of the table weight exist. So, the table weight through an effect of decrease call it into the realization of cost down. Stick-slip friction has a great influence on the contouring accuracy of CNC machine tools. In this paper table levitation system has been developed for the stick-slip in a fled drive systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.537-543
• /
• 2003

Condition monitoring and fault diagnosis of machines are gaining importance in the industry because of the need to increase reliability and to decrease possible loss of production due to machine breakdown. By comparing the vibration signals of a machine running in normal and faulty conditions, detection of faults like mass unbalance, shaft misalignment and bearing defects is possible. This paper presents a novel approach for applying the fault diagnosis of rotating machinery. To detect multiple faults in rotating machinery, a feature selection method and support vector machine (SVM) based multi-class classifier are constructed and used in the faults diagnosis. The results in experiments prove that fault types can be diagnosed by the above method.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.32-37
• /
• 2000

In a high speed spindle system, it is very important to monitor the operation of the spindle to prevent catastrophic damage to the system. Widely used sensors for monitoring are eddy-current and capacitive types. These sensors provide high accuracy of monitoring, but their steep prices lead to expensive high speed spindle system. The main god of our research is to develop technology to produce high speed spindle system utilizing magnetic bearings. As active magnetic bearings require position sensors for feedback control, a noncontact position sensor is bang developed as a part of this main goal. Once developed, it will contribute to affordable high speed spindle system. In this paper, we report the selection process of the sensor types and the experimental results with driving circuits.