• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.89-96
• /
• 2007

In this paper, a new air bearing stage with magnetic preload and a linear motor has been developed for the small precision machine systems. The new air bearing stage is unique in the sense that permanent magnets attached bottom of the iron core of table are used not only for preloading air bearings in vertical direction but also for generating thrust force by current of the coil at base. The characteristics of air bearings using porous pads were analyzed with numerical method, and the magnetic circuit model was derived for linear motor for calculating required preload force and thrust force. A prototype of single axis miniature stage with size of $120(W){\times}120(L){\times}50(H)\;mm^3$ was designed and fabricated and examined its performances, vertical stiffness, load capacity, thrust force and positioning resolution.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.12
• /
• pp.3909-3916
• /
• 1996

Magnetic bearing is the machine element that supports the shaft without mechanical contact using the magnetic force induced by permanent magnet of electromagnet. Active magnetic bearing system is composed of sensor, controller, power amplifier, and electromagnet. If all the elements were dieal, shaft position could be controlled to sensor resolution, Because each elements inreal system have mechanical and electricla losses and nonlinearity, it is impossible to attain the desired performance using general control algorithm. So far it has been studied on improvement of the control algorithm of the electric characteristics of each elements. Another factors to affect shaft behavior are the manufacturing errors due to machine work, and assembling errors due to accumulate manufacturing errors of the radial magnetic bearing. This paper describes that the shaft behavior due to accumulate manufacturing errors and asymmetric bolting. This paper describes that the shaft behavior due to assembling errors of the radial bearings donot affect the rotaitonal accuracy of the shaft. But when the amplitude of the assembling errors increasees over the certain value, the bearing can not support the shaft properly.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.145-159
• /
• 2012

Fracture patterns observed in the phyllosilicate-bearing layers of the Mawrth Vallis region are analyzed using High Resolution Imaging Science Experiment image data in order to understand the causes of polygonal fracturing. HiRISE data show that the different mineralogies have distinct surface textures and morphologies. The majority of the nontronite-bearing rocks typically appear to have been heavily eroded and are fractured into irregular shaped blocks with variable size, whereas most of the montmorillonite-bearing rocks have polygons which are relatively consistent in size and shape. The majority of the fracture patterns observed in the nontronite-bearing outcrops are interpreted to be a result of unloading stresses. While the polygonal fractures developed in the montmorillonite-bearing layers appear to be a product of desiccation.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.72-78
• /
• 2004

In this paper, a development of an inductive position sensor is described. The sensor is similar to a radial magnetic bearing in that the sensor stator is shaped like a heteropolar magnetic bearing and is driven by a switching amplifier. A demodulation filter extracts the gap information from the switching current ripples. A prototype sensor exhibits the resolution of $0.43\mum$ and the dynamic bandwidth of about 800Hz. The dynamic performance can be improved by increasing the switching frequency. However, the eddy current effects become noticeable at high switching frequency, thus limiting the improvement of the bandwidth.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.1
• /
• pp.19-24
• /
• 2008

We propose a new miniature air-bearing stage with a moving-magnet slotless linear motor. This stage was developed to achieve the precise positioning required for submicron-level machining and miniaturization by introducing air bearings and a linear motor sufficient for mesoscale precision machine tools. The linear motor contained two permanent magnets and was designed to generate a preload force for the vertical air bearings and a thrust force for the stage movement. The characteristics of the air bearings, which used porous pads, were analyzed with numerical methods, and a magnetic circuit model was derived for the linear motor to calculate the required preload and thrust forces. A prototype of a single-axis miniature stage with dimensions of $120\;(W)\;{\times}\;120\;(L)\;{\times}\;50\;(H)\;mm$ was designed and fabricated, and its performance was examined, including its vertical stiffness, load capacity, thrust force, and positioning resolution.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.852-857
• /
• 2004

In this paper, an angular self-sensing algorithm is proposed and implemented to a Lorentz force type integrated motor-bearing system. It is based on the principle that the flux linkages of stator windings, calculated from the voltage and torque control current, are the functions of the rotor angle. The tracking angular position error is proven to vanish using the Lyapunov stability method, and the experimental results show that the initial error decays within about 5 seconds. It is found that the resolution of the algorithm remains about 1º over the speed range of 100 to 1000 rpm.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.06a
• /
• pp.308-311
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.497-502
• /
• 1994

A new chiral stationary phase (CSP) for the liquid chromatographic resolution of enantiomers was prepared from (S)-naproxen and 3,5-dinitroaniline. The 6-alkoxy-2-naphthyl group of the CSP was presumed to act as a ${\pi}$-basic interaction site for resolving ${\pi}$-acidic racemates while the 3,5-dinitroanilide group of the CSP was presumed to play a role as a ${\pi}$-acidic interaction site for resolving ${\pi}$-basic racemates. From the chromatographic resolution trends of N-alkylamide derivatives of ${\alpha}$-arylalkylamines on the CSP prepared, the chiral recognition mode involving the intercalation of the amide alkyl chain of the less retained enantiomers between the connecting tethers of the CSP was proposed.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.63-64
• /
• 2013

Induction motors' faults detection is almost a popular topic among researchers. Monitoring the output of motors is a key factor in detecting these faults. (Short-time) Fourier, (continuous, discrete) wavelet, and extended Park vector transformations are among the methods for fault detection. One major deficiency of these methods is not being able to detect the severity of faults that carry low energy information, e.g. in ball bearing system failure, there is absolutely no way to detect the severity of fault using Fourier or wavelet transformations. In this paper, the authors have applied the Discrete Wavelet Transform (DWT) frequency-domain analysis to detect bearing faults in an induction motor. In other words, in discrete transform which the output signal is decomposed in several steps and frequency resolution increases considerably, the frequency-band analysis is performed and it will be verified that first of all, fault sidebands become more recognizable for detection in higher levels of decomposition, and secondly, the inner race bearing faults turn out easier in these levels; and all these matter because of eliminating the not-required high energy components in lower levels of decomposing.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.482-488
• /
• 2003

Line may receiver contains an ambiguity on conjugate bearings, because of lacking aperture in transverse direction. To solve the left/right bearing ambiguity of line-array receiver we used line-array with cardioid beam. In addition, the synthetic aperture method adopts coherent processing of sub-aperture signals at successive time intervals in the beam domain. We presented performances about division of left/right bearing ambiguity according to array synthetic number of times in this paper.