• 제목/요약/키워드: Beam current control

검색결과 152건 처리시간 0.025초

양성자 조사법에 의한 고속스위칭 사이리스터의 제조 (Fabrication of a Fast Switching Thyristor by Proton Irradiation)

  • 김은동;장창리;김상철;김남균
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.271-275
    • /
    • 2004
  • A fast switching thyristor with a superior trade-off property between the on-state voltage drop and the turn-off time could be fabricated by the proton irradiation method. After fabricating symmetric thyristor dies with a voltage rating of 1,600V from $350{\mu}m$ thickness of $60{\Omega}cm$ NTD-Si wafer and $200{\mu}m$ width of N-base drift layer, the local carrier lifetime control by the proton irradiation was performed with help of the HI-13 tandem accelerator in China. The thyristor samples irradiated with 4.7MeV proton beam showed a superior trade-off relationship of $V_{TM}=1.55V\;and\;t_q=15{\mu}s$ attributed to a very narrow layer of short carrier lifetime(${\sim}1{\mu}s$) in the middle of its N-base drift region. To explain the small increase of $V_{TM}$, we will introduce the effect of carrier compensation by the diffusion current at the low carrier lifetime region.

  • PDF

Efficient excitation and amplification of the surface plasmons

  • Iqbal, Tahir
    • Current Applied Physics
    • /
    • 제18권11호
    • /
    • pp.1381-1387
    • /
    • 2018
  • One dimensional (1D) grating has been fabricated (using focused ion beam) on 50 nm gold (Au) film deposited on higher refractive index Gallium phosphate (GaP) substrate. The sub-wavelength periodic metal nano structuring enable to couple photon to couple with the surface plasmons (SPs) excited by them. These grating devices provide the efficient control on the SPs which propagate on the interface of noble metal and dielectric whose frequency is dependent on the bulk electron plasma frequency of the metal. For a fixed periodicity (${\Lambda}=700 nm$) and slit width (w = 100 nm) in the grating device, the efficiency of SPP excitation is about 40% compared to the transmission in the near-field. Efficient coupling of SPs with photon in dielectric provide field localisation on sub-wavelength scale which is needed in Heat Assisted Magnetic recording (HAMR) systems. The GaP is also used to emulate Vertical Cavity Surface emitting laser (VCSEL) in order to provide cheaper alternative of light source being used in HAMR technology. In order to understand the underlying physics, far-and near-field results has been compared with the modelling results which are obtained using COMSOL RF module. Apart from this, grating devices of smaller periodicity (${\Lambda}=280nm$) and slit width (w = 22 nm) has been fabricated on GaP substrate which is photoluminescence material to observe amplified spontaneous emission of the SPs at wavelength of 805 nm when the grating device was excited with 532 nm laser light. This observation is unique and can have direct application in light emitting diodes (LEDs).

Spectral-shape-controllable Chirped Fiber Bragg Grating with a Photomechanical Microactuator: Simulation and Experiment

  • Moon, Jong-Ju;Ko, Youngmin;Park, Su-Jeong;Ahn, Tae-Jung
    • Current Optics and Photonics
    • /
    • 제4권6호
    • /
    • pp.477-482
    • /
    • 2020
  • Recently, one of the authors has been reported an optically tunable fiber Bragg grating (FBG) with a photomechanical polymer. It was based on a typical FBG with a downsized diameter of 60 ㎛, coated with azobenzene-containing polymer material. Azobenzene is a well-known reversibly photomechanical stretchable material under ultraviolet (UV) light. The small part of the functional-coating region on the FBG absorbed UV light, which pulled the UV-exposed part of the grating. It was selectable as tunable FBG or tunable chirped FBG, by adjusting the position of UV exposure on the grating. As proof of concept for the tunable FBG device, the characteristics just including UV-induced center-wavelength shift and spectral-width changes of the device were reported. In this paper, we report for the first time that the microactuator makes it possible to control the spectral shape of the FBG reflection, according to the specifications (shape and intensity) of the UV beam that reaches the FBG coated with the azobenzene polymer. In addition, we provide the group-delay profiles for the chirped FBG, so that the sign of its dispersion (normal or anomalous) can be tailored by simply selecting the moving direction of the UV light's displacement in the experiment.

Seismic fragility assessment of steel moment-resisting frames equipped with superelastic viscous dampers

  • Abbas Ghasemi;Fatemeh Arkavazi;Hamzeh Shakib
    • Earthquakes and Structures
    • /
    • 제25권5호
    • /
    • pp.343-358
    • /
    • 2023
  • The superelastic viscous damper (SVD) is a hybrid passive control device comprising a viscoelastic damper and shape memory alloy (SMA) cables connected in series. The SVD is an innovative damper through which a large amount of seismic energy can dissipate. The current study assessed the seismic collapse induced by steel moment-resisting frames (SMRFs) equipped with SVDs and compared them with the performance of special MRFs and buckling restrained brace frames (BRBFs). For this purpose, nonlinear dynamic and incremental dynamic analysis (IDA) were conducted in OpenSees software. Both 5- and 9-story special MRFs, BRBFs, and MRFs equipped with the SVDs were examined. The results indicated that the annual exceedance rate for maximum residual drifts of 0.2% and 0.5% for the BRBFs and MRFs with SVDs, respectively, were considerably less than for SMRFs with reduced-beam section (RBS) connections and that the seismic performances of these structures were enhanced with the use of the BRB and SVD. The probability of collapse due to residual drift in the SVD, BRB, and RBS frames in the 9-story structure was 1.45, 1.75, and 1.05 times greater than for the 5-story frame.

수술이 불가능하여 고식적 목적의 외부방사선 단독치료 후 장기 안정병변 상태를 유지하고 있는 진행된 갑상선 유두암 1예 (A Case of Inoperable Advanced Papillary Thyroid Carcinoma Maintaining Long-term Stable Disease State after Palliative Aim Radiation Therapy Alone)

  • 김태현;우홍균
    • 대한두경부종양학회지
    • /
    • 제40권1호
    • /
    • pp.7-13
    • /
    • 2024
  • The current standard of treatment for differentiated thyroid cancer is surgical resection followed by radioactive iodine therapy according to the recurrence risk. However, external beam radiotherapy may be recommended in limited cases where surgical resection is impossible or residual gross lesion remains or the aforementioned standard therapy is deemed insufficient in achieving local control. We report a case of 59 year old patient who presented with advanced papillary thyroid carcinoma of right neck but was unable to receive surgical resection due to underlying Eisenmenger syndrome. He received radiation therapy of 67.5 Gy in 30 fractions with palliative aim with no further treatment and has been maintaining long-term stable disease state for 38 months. Herein, we report a rare case of palliative aim radiation therapy alone for advanced papillary thyroid carcinoma with literature review.

Electrochemical Detection of $17{\beta}-estradiol$ by using DNA Aptamer Immobilized Nanowell Gold Electrodes

  • Kim, Yeon-Seok;Jung, Ho-Sup;Lee, Hea-Yeon;Kawai, Tomoji;Gu, Man-Bock
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2005년도 생물공학의 동향(XVI)
    • /
    • pp.88-92
    • /
    • 2005
  • Aptamer is the single-stranded oligonucleotide which binds to various target molecules such as proteins, peptides, lipids and small organic molecules with high affinity and specificity. DNA aptamers specific for the $17{\beta}-estradiol$ were selected by SELEX (Systematic Evolution of Ligands by EXponential enrichment) process from a random DNA library. These DNA aptamers have a high affinity to $17{\beta}-estradiol$ as an endocrine disrupting chemical. Nanowell and $200{\mu}m$ gold electrode were used as substrate for DNA aptamer immobilization and electrochemical analysis. Especially, nanowell gold electrode was fabricated by e-beam lithography. The size of single nanowell is 130nm and 40,000 nanowells were deposited on one gold electrode. The immobilization method was based on the interaction between the biotinylated aptamer and streptavidin deposited on gold electrode previously. Immobilization procedure was optimized by surface plasma resonance (SPR) and electrochemical analysis. After the immobilization of DNA aptamer on streptavidin modified gold electrode, $17{\beta}-estradiol$ solution was treated on aptamer immobilized gold electrode. The current of gold electrode was decreased by the binding of $17{\beta}-estradiol$ to DNA aptamer immobilized on gold electrode. However, in negative control experiments of 1-aminoanthraquinone and 2-methoxynaphthalene, the current was rarely decreased. And more sensitive data was obtained from nanowell gold electrode comparing with $200{\mu}m$ gold electrode.

  • PDF

균열손상 후 동결융해를 경험한 철근콘크리트 보의 휨거동 (Effect of Freeze-Thaw Cycles after Cracking Damage on the Flexural Behavior of Reinforced Concrete Beams)

  • 김선우;최기봉;윤현도
    • 콘크리트학회논문집
    • /
    • 제22권3호
    • /
    • pp.399-407
    • /
    • 2010
  • 이 연구에서는 동결융해 사이클을 경험한 2가지 종류의 휨부재의 거동특성을 평가하였다. 이 연구의 목적은 동결융해에 따른 철근콘크리트 보의 거동특성을 검토하는 것이다. 이를 위해 일부 실험체는 동결융해를 경험하기 전, 인장철근이 항복되기까지 손상을 입도록 계획되었다. 또한 반복하중 재하시 강성저하 특성을 평가하기 위하여 단조 및 반복재하 실험을 실시하였다. 재료 실험 결과, 동결융해 300사이클을 경험한 콘크리트의 상대동탄성계수는 86.8%까지 감소되었으나 내동해저항성은 충분히 가지고 있는 것으로 평가되었다. 단조재하 실험 결과, 동결융해 사이클에 따른 휨 강도, 연성 및 강성은 상대적으로 감소하는 것으로 나타났다. 특히, 인위적 균열손상을 경험한 BDF13 시리즈는 현행 콘크리트설계기준에서 요구하는 공칭모멘트를 만족하지 못하는 것으로 나타났다. 반복재하시 BF75 시리즈에서 동결융해를 경험함에 따라 10% 이상의 반복강성 저하를 나타내었다. 따라서 내진부재와 같이 반복하중을 받게 되는 부재를 설계할 경우, 동결융해로 인한 압축측 콘크리트의 변형 특성도 고려되어야 할 것으로 판단된다.

항만공사용 사석 고르기 수중로봇의 제어 및 지형인식에 관한 연구 (Study on the Control and Topographical Recognition of an Underwater Rubble Leveling Robot for Port Construction)

  • 김태성;김치효;이진형;이민기
    • 한국항해항만학회지
    • /
    • 제42권3호
    • /
    • pp.237-244
    • /
    • 2018
  • 수중에서 로봇으로 사석 고르기 작업을 실시할 경우 로봇 주위의 지형 정보를 실시간으로 제공해야 원격조종이 가능하다. 현 위치로부터 주변지형의 높낮이를 보여줘야 운전자가 작업 계획을 수립하고, 전복과 같은 사고도 예방할 수 있다. 지금까지 지형인식은 멀티 빔 소나에 의해 이뤄졌는데 이는 작업 전후의 품질을 평가하는 용도만 사용되었지 원격조종에서 필요한 실시간 정보로는 사용될 수 없었다. 본 연구는 수중 사석 고르기 작업을 위한 실시간 지형인식 방법을 개발한다. 버킷이 지면을 누를 때 전달되는 힘을 측정해 접촉여부를 판단하고, 실린더의 길이를 읽어 접촉위치를 계산한다. 버킷의 위치제어를 위해 가변 뱅뱅제어 알고리즘을 적용하고 숙련된 굴삭기 운전자의 작업패턴을 프로그램화해 지형인식, 긁기, 밀기, 전진 등의 작업을 자동으로 수행하도록 한다. 개발된 방법은 로봇 몸체로부터 버킷의 거리에 따라 3차원 격자 지형을 상대적으로 보여줌으로써 작업자가 쉽게 지형을 인식하고 지형에 따라 작업계획을 세우도록 한다.

병렬 메쉬 및 교번 충.방전 방식에 의한 펄스형 Nd:YAG 레이저의 고반복 동작특성에 관한 연구 (The high repetition operating characteristics of pulsed Nd:YAG laser by parallel mesh and alternating charge-discharge system)

  • 박구렬;김병균;홍정환;김휘영;김희제;조정수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.1060-1062
    • /
    • 1999
  • Pulsed Nd:YAG laser is used widely for materials processing and instrumentation. It is very important to control the laser energy density in materials processing by a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, the alternating charge-discharge system was designed to adjust a pulse repetition rate. And the parallel mesh is added to increase laser output power. This system is controlled by one chip microprocessor and allows to replace an expensive condenser for high frequency to a cheap condenser for low frequency. In addition, we have investigated the current pulse shape of flashlamp and the operating characteristics of a pulsed Nd:YAG laser. As a result, it is found that the laser output of the power supply using the parallel mesh and the alternating charge-discharge system is not less than that of typical power supply. As the pulse repetition rate rises from 10pps to 110pps by the step of 20pps at 1000V and 1200V, it is found that the laser efficiency decreases but the laser output power increases about 5W at each step.

  • PDF

펄스형 Nd:YAG 레이저의 교번 충.방전 방식에 의한 고반복 동작특성 (The high repetition operating characteristics of pulsed Nd:YAG laser by alternating charge-discharge system)

  • 김휘영;박구렬;김병균;홍정환;강욱;김희제
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 E
    • /
    • pp.2204-2206
    • /
    • 1999
  • Pulsed Nd:YAC laser is used widely for materials processing and instrumentation. It is very important to control the laser energy density in materials processing by a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, the alternating charge-discharge system was designed to adjust a pulse repetition rate. This system is controlled by one chip microprocessor and allows to replace an expensive condenser for high frequency to a cheap condenser for low frequency. In addition. we have investigated the current pulse shape of flashlamp and the operating characteristics of a pulsed Nd:YAG laser. As a result, it is found that the laser output of the power supply using the alternating charge-discharge system is not less than that of typical power supply. As the pulse repetition rate rises from 30pps to 120pps by the step of 30pps at 1200V, it is found that the laser efficiency decreases but the laser output power increases about 6W at each step.

  • PDF