• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.99-100
• /
• 2015

본 논문은 Hybrid Electric Vehicle용 리튬이온배터리의 ECM (Equivalent Circuit Model) 선정 방법을 제안한다. 전기 회로를 구성하는 성분들의 특징을 분석하고, 그 결과와 EIS (Electrochemical Impedance Spectroscopy) 장비의 측정 결과를 참고하여 배터리를 모델링한다. 다양한 종류의 배터리에 이 방법을 적용하여 각 배터리에 적합한 ECM을 선정하고, 그 임피던스를 EIS 측정 결과에 비교하여 타당성을 검증한다. 또한, 기존에 제시된 ECM과 비교하여 정확도 개선을 평가한다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.420-421
• /
• 2019

리튬 이온 배터리는 전압, 전류, 온도 등의 측정 정보를 기반으로 용량, 수명 등 배터리의 상태를 추정해야 하며 이를 위해 다양한 방법들이 활용되고 있다. 이러한 추정 정보들은 결국 배터리 관리 시스템에서 수행하는 핵심 기능이며 효율적이고 안전한 제어를 수행하기 위해 필수적인 정보이다. 본 연구에서는 배터리 팩의 실험 데이터를 이용하여 근사 모델을 개발하고 이를 이용하여 배터리 팩의 용량을 추정하는 방법에 대한 연구를 수행하였다. 기존 수학적 모델 기반의 알고리즘을 활용하는 방법과 통계적인 기법을 활용하는 방법으로 구현하는 것과 달리, 충분한 데이터 확보가 가능한 경우, 데이터를 표현하는 근사 모델을 생성하고 이에 대한 활용 가능성을 확인하였다.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.255-261
• /
• 2022

Routing Protocol for Low-Power and Lossy Networks (RPLs) in Internet of Things (IoT) is currently one of the most popular wireless technologies for sensor communication. RPLs are typically designed for specialized applications, such as monitoring or tracking, in either indoor or outdoor conditions, where battery capacity is a major concern. Several routing techniques have been proposed in recent years to address this issue. Nevertheless, the expansion of the network lifetime in consideration of the sensors' capacities remains an outstanding question. In this research, aANN-CUCKOO based optimization technique is applied to obtain a more efficient and dependable energy efficient solution in IOT-RPL. The proposed method uses time constraints to minimise the distance between source and sink with the objective of a low-cost path. By considering the mobility of the nodes, the technique outperformed with an efficiency of 98% compared with other methods. MATLAB software is used to simulate the proposed model.

• Current Photovoltaic Research
• /
• v.11 no.2
• /
• pp.58-65
• /
• 2023

The expanding significance of energy storage (ES) technology is increasing the acceptability of power systems by augmenting renewable energy supply. To deploy such ES technologies, we must select the optimal technology that meets the requirements of the system and confirm the technical and economic feasibility of the business model based on it. Herein, we propose a method and tool for selecting the optimal ES technology and service suitable for meeting the requirements of the system, based on its performance characteristics. The method described in this study can be used to discover and apply various ES technologies and develop business models with excellent economic feasibility.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.215-217
• /
• 2020

본 논문은 배터리 팩 내부 셀 파라미터의 불균일도에 대한 분석을 실시하고 이를 기반으로 과방전을 사전에 진단할 수 있는 방법을 제안한다. 이를 위해서 배터리 팩 내부 셀간 편차가 발생하는 셀을 선정하여 두 셀간 특성 분석을 실시하였으며, 이를 기준으로 예측 모델을 구성하였다. 예측 성능을 통해 배터리 전압 예측 성능에 영향을 미치는 인자를 분석하였으며, 배터리 전기적 등가회로 모델을 기반으로 예측 모델을 제안한다. 예측 모델은 실제 과방전이 발생한 셀을 기준으로 실험데이터와 비교하여 예측 성능을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.377-378
• /
• 2020

본 논문에서는 열화에 따른 하이브리드 차량의 연비 특성을 분석하기 위해 시뮬레이션을 통한 연구를 진행하였다. 전기적 특성 실험 기반으로 배터리 내부 파라미터가 열화에 어떤 영향을 미치는지 분석을 하고 이를 기반으로 하이브리드 차량모델을 통해 시뮬레이션을 진행하였다. 분석 결과를 통해 배터리 열화 상태에 따른 State-Of-Charge (SOC) 및 연비효율 그래프의 변화 추이를 비교하였다.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2016

Developments in power electronics have enabled the widespread application of Pulse Width Modulation (PWM) inverters, notably for connecting renewable systems to the grid. This study demonstrates that a high-quality power can be achieved using a stand-alone inverter, whereby the comparison between the power quality of the stand-alone inverter with battery storage (off-grid) and the power quality of the utility network is presented. Multi-loop control techniques for a single phase stand-alone inverter are used. A capacitor current control is used to give active damping and enhance the transient and steady state inverter performance. A capacitor current control is cheaper than the inductor current control, where a small current sensing resistor is used. The output voltage control is used to improve the system performance and also control the output voltage. The inner control loop uses a proportional gain current controller and the outer loop is implemented using internal model control proportional-integral-derivative to ensure stability. The optimal controls are achieved by using the Sisotool tool in MATLAB/Simulink. The outcome of the control scheme of the numerical model of the stand-alone inverter has a smooth and good dynamic performance, but also a strong robustness to load variations. The numerical model of the stand-alone inverter and its power quality are presented, and the power quality is shown to meet the IEEE 519-2014. Furthermore, the power quality of the off-grid system is measured experimentally and compared with the grid power, showing power quality of off-grid system to be better than that of the utility network.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.35-40
• /
• 2017

Out-of-limit (OOL) alarm method that is threshold checking of telemetry value is widely used for the satellites fault diagnosis and health monitoring. However, it requires engineering knowledge and effort to define delicate threshold value and has limitations that anomalous behaviors within the defined limits can't be detected. In this paper, we propose a satellite anomalous behavior detection system through fuzzy model that is composed by important statistical feature selected by rough-set theory. Not pre-defined anomaly is detected because only normal state data is used for fuzzy model. Also, anomalous behavior within the threshold limit is detected by using statistic feature that can be collected without engineering knowledge. The proposed system successfully detected non-ordinary state for battery temperature telemetry.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.7
• /
• pp.469-477
• /
• 2009

In mobile systems, energy efficiency is critical to extend battery life. Therefore, power consumption should be taken into account to develop software in addition to performance, Efficient software design in power and performance is possible if accurate power prediction is accomplished during the execution of software, In this paper, power estimation model is developed using statistical analysis, The proposed model analyzes processor behavior Quantitatively using the data of performance monitoring events and power consumption collected by executing various benchmark programs, And then representative hardware events on power consumption are selected using hierarchical clustering, The power prediction model is established by regression analysis in which the selected events are independent variables and power is a response variable, The proposed model is applied to a PXA320 mobile processor based on Intel XScale architecture and shows average estimation error within 4% of the actual measured power consumption of the processor.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.214-219
• /
• 2013

This paper proposes the robust high-gain observer based SOC estimatro for uncertain RC model of Li-Ion batteries. In general, RC battery model has inevitable uncertainties and it cause some negative effect to estimate the accurate SOC of Li-Ion batteries. The proposed estimator overcomes such weakness with two techniques; high-gain observer design technique and sliding mode control technique. A high-gain observer provides the robustness against model uncertainties to the proposed estimator. A sliding mode control technique helps the proposed estimator by reducing the side effect of adopting a high-gain observer such as peaking phenomenon and perturbation. The performance of the proposed estimator is verified by some simulation.