• 전기학회논문지
• /
• 제61권12호
• /
• pp.1791-1800
• /
• 2012

This paper presents effective design schemes for a photovoltaic (PV) and battery hybrid system that includes state-of-the-art technologies such as maximum power point tracking scheme for PV arrays, an effective charging/discharging circuit for batteries, and grid-interfacing power inverters. Compared to commonly-used PV systems, the proposed configuration has more flexibility and autonomy in controlling individual components of the PV-battery hybrid system. This paper also proposes an intelligent coordination scheme for the components of the PV-battery hybrid system to improve the efficiency of renewable energy resources and peak-load management. The proposed algorithm is based on a rule-based expert system that has excellent capability to optimize multi-objective functions. The proposed configuration and algorithms are investigated via switching-level simulation studies of the PV-battery hybrid system.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.121-125
• /
• 2016

KEPCO has completed the installation and demonstration of a 52 MW battery energy storage system (BESS) for frequency regulation. Especially, 24 MW BESS is for Automatic Generation Control (AGC) in Shin-Yongin substation. Recently, KEPCO Research Institute has operated it connected to EMS of KPX. This paper discussed the operation strategy of EMS through a study on using 24 MW BESS in AGC operation and propose the improvement of AGC target. It is expected that this paper helps a safe and reliable operation and control of ESS for AGC through its continuous update.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1099-1106
• /
• 2012

Microgrid is a new electrical energy system that composed of various generators, renewable energy, batteries and loads located near the electrical customers. When Microgrid is interconnected with large power system, Microgrid don't need to control the frequency. But in case of the outage or faults of power system, Microgrid should control the frequency to prevent the shutdown of Microgrid. This paper presents the frequency control methods using the droop function, being used by synchronous generators and EMS(Energy Management System). Using droop function, two battery systems could share the load based on locally measured signals without any communications between batteries. Also, we suggest that EMS should control the controllable distributed generators as P/Q control modes except batteries to overcome the weakness of droop function. Finally we suggest the two batteries systems to prolong the battery's life time considering the economical view. The validation of proposed methods is tested using PSCAD/EMTDC simulations and field test sites at the same time.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1195-1201
• /
• 2016

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.63-66
• /
• 1991

With the diversity of life patterns and the improvement of level in life which have been resulted from the economic development, people have showed the tendency to pursue the comfortable life as well as the home automation or intelligent house. Furthermore, the clean energy supply and management system have been introduced for the solution of environmental problem on earth and the effective utilization of energy. This study is to describe the battery energy storage device, which is one of the clean energy supply and management systems that are economically efficient in both sides of supply and demand. and able to solve the problem of energy crisis.

• Advances in Energy Research
• /
• 제4권1호
• /
• pp.47-68
• /
• 2016

A well designed hybrid power system (HPS) can deliver electrical energy in a cost effective way. In this paper, model for HPS consisting of photo voltaic (PV) module and wind mill as renewable energy sources (RES) and solar lead acid battery as storage device connected to unidirectional grid is developed for peak demand reduction. Life time energy cost of the system is evaluated. One year hourly site condition and load pattern are taken into account for analysing the HPS. The optimal HPS is determined for least life time energy cost subject to the constraints like state of charge of the battery bank, dump load, renewable energy (RE) generation etc. Optimal solutions are also found out individually for PV module and wind mill. These three systems are compared to find out the most feasible combination. The results show that the HPS can deliver energy in an acceptable cost with reduced peak consumption from the grid. The proposed optimization algorithm is suitable for determining optimal HPS for desired location and load with least energy cost.

• Journal of Information Processing Systems
• /
• 제11권1호
• /
• pp.116-124
• /
• 2015

Smart grids propose new solutions for electricity consumers as a means to help them use energy in an efficient way. In this paper, we consider the demand-side management issue that exists for a group of consumers (houses) that are equipped with renewable energy (wind turbines) and storage units (battery), and we try to find the optimal scheduling for their home appliances, in order to reduce their electricity bills. Our simulation results prove the effectiveness of our approach, as they show a significant reduction in electricity costs when using renewable energy and battery storage.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 추계학술대회
• /
• pp.279-284
• /
• 2002

All-vanadium redox flow battery(VRFB) has been studied actively as one of the most promising electrochemical energy storage systems for a wide range of applications such as electric vehicles, photovoltaic arrays, and excess power generated by electric power plants at night time. CPCS has been shown to have the characteristics as an excellent current collector for VRFB and electrochemical properties of specific resistivity 0.31 $\Omega$cm, which were composed of G-1028 80 wt%, PVC 10 wt%, DBP 5 wt% and FS 5 wt%. Energy efficiencies of VRFB with the CPCE and the existing electrode assembly were 84.14 % and 77.24 % respectively, in charge/discharge experiments at constant current of 200 mA, and the CPCE was confirmed to be suitable as the electrode of VRFB.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.310-314
• /
• 2023

The purpose of this study is to predict the remaining capacity of lithium-ion batteries and evaluate their performance using five artificial intelligence models, including linear regression analysis, decision tree, random forest, neural network, and ensemble model. We is in the study, measured Excel data from the CS2 lithium-ion battery was used, and the prediction accuracy of the model was measured using evaluation indicators such as mean square error, mean absolute error, coefficient of determination, and root mean square error. As a result of this study, the Root Mean Square Error(RMSE) of the linear regression model was 0.045, the decision tree model was 0.038, the random forest model was 0.034, the neural network model was 0.032, and the ensemble model was 0.030. The ensemble model had the best prediction performance, with the neural network model taking second place. The decision tree model and random forest model also performed quite well, and the linear regression model showed poor prediction performance compared to other models. Therefore, through this study, ensemble models and neural network models are most suitable for predicting the remaining capacity of lithium-ion batteries, and decision tree and random forest models also showed good performance. Linear regression models showed relatively poor predictive performance. Therefore, it was concluded that it is appropriate to prioritize ensemble models and neural network models in order to improve the efficiency of battery management and energy systems.

• 자원리싸이클링
• /
• 제31권4호
• /
• pp.3-11
• /
• 2022

전기차 수요의 증가로 향후 폐차 혹은 배터리 노후화로 인한 폐배터리 배출량 급증이 예상됨에 따라 이에 대한 적정 관리가 시급한 실정이다. 기술개발 측면에서는 데이터 기반 진단 등 다양한 폐배터리 진단 및 관리 기술이 주목을 받고 있다. 또한 로봇기반 자동 해체 기술은 산업 현장에서의 Test 검증 및 향후 배터리 관련 데이터베이스와의 연동이 필요한 것으로 보인다. 특히 향후 폐배터리 순환과정에서의 효율화와 동시에 안전성/친환경성 제고를 위한 다양하고 선진적인 배터리 진단 및 평가기법 개발 및 보급이 중요하다. 또한 리튬 관련 화학물질 배출이동에 대한 데이터베이스화와 배터리 연소시 가스유출위험 및 소방안전에 관한 평가 및 대처가 중요할 것으로 보인다. 더 나아가 데이터 기반 진단/분류/해체 과정을 재활용/최종폐기와 연계된 다양한 관점에서의 폐배터리 전주기 관리 최적화 등에 향후 더 많은 연구개발이 필요하다고 판단된다. 그리고 일련의 데이터는 차후 배터리 생산 시 환경적 부담을 감소시키고 재이용/재활용이 원활하도록 청정설계 및 제조에 기여해야 한다. 또한 이러한 최적화는 전기차 배터리의 향후 기술 및 시장 변동을 감안하여 추진되어야 한다.