• 한국CDE학회논문집
• /
• 제21권1호
• /
• pp.61-68
• /
• 2016

Since past till now, automotive wiring harness has been designed and produced under the method of part number list. However, the number of options has increased gradually on the basis of customer's needs and car manufacturer's policy, thereby bringing about an increase in the number of classified parts. Because of a large number of classified parts, cost estimates for manufacturing and production planning are more important than ever. However, the pre-existing manufacturing bill of material abbreviated as BOM is only focused on the list of materials used for actual manufacturing, and as such there have been limits to other fields or areas of usage except for manufacturing. In essence, the present paper is concerned with our study conducted on modular BOM as one of planning BOM. On such basis, we have been able to completely use a method by which to have access, make an option units' calculation in wiring harness manufacturing, and build an efficient system for cost estimates in manufacturing as well.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.865-870
• /
• 2009

In this study, the adequacy of Reynolds numbers and Froude numbers derived from about sixty domestic water treatment plants (WTPs) were analyzed in order to estimate the characteristics of hydraulic behavior within the rectangular shaped sedimentation basins used widely. From the results of analysis, most of domestic WTPs have satisfied the criteria regulated as that Reynolds number should less than 1,000(dimensionless). On the other hand, they have not been able to satisfy the Froude number criteria, which should be higher than $1.0{\times}10^{-6}$. The reasons why most of domestic WTPs could not satisfy the criteria are that its criteria basis has been not only inadequate, but also the concept of external flow occurred around a settling particle has been ignored. Accordingly, this study proved the feasibility of Archimedes number, which indicates the ratio between particle Reynolds number and Froude number, to evaluate the hydraulic efficiency and its function of scale factor.

• 한국전자통신학회논문지
• /
• 제4권3호
• /
• pp.197-203
• /
• 2009

부호이론이나 암호학의 응용분야에 유한체는 매우 중요한 내용이고, 컴퓨터에서의 구현시에는 종규기저를 사용하는 것이 효과적이다. 본 논문에서는 유한체 타입 I 최적정규기저를 가지는 $GF(2^{mk})$는 $GF(2^m)$의 확대체가 된다는 사실을 이용하여 지금까지 알려진 가장 효율적인 Reyhani-Masoleh and Hasan의 곱셈기보다 25%정도 빠른 곱셈기를 소개하려고 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2448-2450
• /
• 1998

For the exact classification of the arm motion this paper proposes EMG pattern recognition method with neural network. For this autoregressive coefficient, linear cepstrum coefficient, and adaptive cepstrum coefficient are selected for the feature parameter of EMG signal, and they are extracted from time series EMG signal. For the function recognition of the feature parameter a radial basis function network, a field of neural network is designed. For the improvement of recognition rate, a number of radial basis function network are combined in parallel, comparing with a backpropagation neural network an existing method.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.448-457
• /
• 2008

A principal components analysis (PCA) of the median-plane head-related impulse responses (HRIRs) in the CIPIC HRTF database reveals that the individual HRIRs in the median plane can be adequately reconstructed by a linear combination of 12 orthonormal basis functions. These basis functions can be used to model arbitrary median-plane HRIRs, which are not included in the process to obtain the basis functions. Memory size can be reduced up to 5-fold depending on the number of HRIRs to be modeled. To clarify whether these basis functions can be used to model other set of arbitrary median plane HRIRs, a numerical error analysis for modeling and a series of subjective listening tests were carried out using the measured and modeled HRIRs. The results showed that the set of individual HRIRs in the median plane, which were measured in our lab using different measurement conditions, techniques, and source positions, can be modeled with reasonable accuracy. All subjects, involved in the subjective listening test, reported not only the accurate vertical perception but also the front-back discrimination with the modeled HRIRs based on 12 basis functions.

• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.243-253
• /
• 1999

The dual reciprocity boundary element method (DRBEM) is used to solve the Graetz problem of laminar flow inside circular duct. In this method the domain integral tenn of boundary integral equation resulting from source term of governing equation is transformed into equivalent boundary-only integrals by using the radial basis interpolation function, and therefore complicate domain discretization procedure Is completely removed. Velocity profile is obtained by solving the momentum equation first and then, using this velocities as Input data, energy equation Is solved to get the temperature profile by advancing from duct entrance through the axial direction marching scheme. DRBEM solution is tested for the uniform temperature and heat flux boundary condition cases. Local Nusselt number, mixed mean temperature and temperature profile inside duct at each dimensionless axial location are obtained and compared with exact solutions for the accuracy test Solutions arc in good agreement at the entry region as well as fully developed region of circular duct, and their accuracy are verified from error analysis.

• 대한수학회보
• /
• 제49권3호
• /
• pp.529-572
• /
• 2012

A basis of a subspace of $S_4({\Gamma}_0(79))$ is given and the formulas for the number of representations of positive integers by some direct sums of the quadratic forms $x^2_1+x_1x_2+20x^2_2$, $4x^2_1{\pm}x_1x_2+5x^2_2$, $2x^2_1{\pm}x_1x_2+10x^2_2$ are determined.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 1993년도 학술발표대회논문집
• /
• pp.33-37
• /
• 1993

This is a study on the Changes of the Apartment House Managerial Problems to grope for the way of more pratical management about increasing the apartment house in Korea. The documentary research method was used for this study and the Han-Kook newspaper(1954-1991) was used as an ananlysis data. On the basis of it, I examined the changes, such as the number of whole articles by time series and the column of head title. I also classified it into several subjects and analyzed it. Finally, I attemped to divide an chronological section on the Changes of the Apartment House Managerial Problems. On the basis of this study, I expect that various documents, related laws and regulations will be analyzed in no distant future. These is going to make the Apartment House Managerial Problems gave more systemic and efficiency.

• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.141-152
• /
• 1996

Currently, North Korea is increasing strategic weapons such as MIG-29, SUCD missle, Nodong #1 missle, etc. This paper focuses on developing the deciding the number of aircraft required for air to surface mission against strategic targets in North Korea. The model is developed under assumptions that weapon types of aircrafts are known and killing probabilities in each case can be estimated. The model is derived on the basis of the TAIM(Theater Air Interdiction Model) which is used in DOD of U.S.A. We utilizes recursive linear programming and dynamic technique in the model in order to solve aircraft allocations for strategic targets which are provided in day time basis. The required number of aircrafts can be obtained from the model output. Finally an example problem is solved using techniques developed in the paper.

• 대한가정학회지
• /
• 제33권2호
• /
• pp.159-166
• /
• 1995

The purpose of the present study is to investigate how closely care labels comply with the 1984 version of the Care Labeling Rule, as well as the change in degree of compliance prior to and after the 1988 IFI care label campaign. Label information was analyzed on the basis of country of origin. The information was also divided into two sets. The basis for dividing the data into two sets was the beginning of the IFI care label campaign in 1988 The data were obtained from 1147 checklists. The information for 1147 samples in six clothing categories were collected from department, specialty, and discount stores. Chi-square analyses were conducted to test hypotheses. While there was no significant difference in the number of incorrect labels on domestically produced garments compared to imported garments in set 1, there was a significant difference in set 2. Also, there was a significnat differnece in the number of incorrect labels between in set 1 and in set 2.