• Journal of Korea Water Resources Association
• /
• v.55 no.5
• /
• pp.383-392
• /
• 2022

The restoration of the Nakdong River estuary is one of the most important projects of the Ministry of Environment, Republic of Korea. A real-scale experiment of gate operation was executed from 2019 to 2020, and a pilot operation was performed in 2021. The gate of Nakdong River Estuary Barrier (NEB) is supposed to be continuously opened based on the experiment results. Many critical decisions should be made immediately during the experiment based on the real-time measured data and numerical analysis considering the seawater inflows. The decision-making sequence was made systematically with the accurate estimation of seawater inflow. The estimation of seawater inflow is the main research objective and the equations of seawater inflow were developed, reflecting the structural characteristics of NEB. The inflow equations were developed in two forms, overflow and underflow. ADCP (Acoustic Doppler Current Profiler) was used to measure seawater inflow, check the accuracy of the developed equations, and derive the flow coefficient. The comparison error of the developed equations was about 3% compared to the measured data.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1011-1020
• /
• 2022

Previous studies for the assessment of submarine groundwater discharge (SGD) were perfomed for areas where a large amount of SGD was observed. Newly developed assessment methods were proposed that was based on an analytic solution using sharp interface model. The proposed mathematical equations used the existing observed groundwater level and hydrogeological data of Jeju Island as input data. The quantitatively assessed FSGD values were compared to the basin-scale recharge estimation values in Seong-San area in eastern Jeju. As a result of the study, it was estimated that the amount of FSGD in the Seongsan area ranges from about 2.65 to 9.15% of the amount of areal-recharge. Through the analysis of the FSGD combined with the analytic model, it is to be provided as a scientific tool to establish a more reasonable coastal water resource management plan.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.209-218
• /
• 2021

Studies of pore structure in shale gas reservoirs are essential to increase recovery rates, which is in the spotlight concerning unconventional resources. In this study, the distribution of pores in shale gas reservoir sample were observed using Scanning Electron Microscope Particle Analysis (SELPA), which is appropriate to analyze the distribution of particle or shape for sample in large area. A sample from the A-068 borehole drilled in the Liard Basin was analyzed; calcite is the main mineral. The pore size ranges from tens of nanometers to hundreds of micrometers and the contribution of each pore size to overall sample porosity was determined using SELPA. The distribution of pores was determined by observing the surface in the same area at magnifications of ×1000, ×3000 and ×5000. Pores less than 100 nm were observed at high magnifications and confirm that small-scale pore distribution can be analyzed and identified rapidly using SELPA. The method introduced in this study will be useful to understand pore structures in unconventional reservoirs.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.3
• /
• pp.41-46
• /
• 2022

Recently, the scale of flood damage occurring in urban areas is increasing due to climate change and urbanization, so various flooding analysis techniques are needed. In the Sadangcheon Stream basin, which has been continuously flooded since 2010, a basic plan for improving drainage was established using XP-SWMM and measures to prevent flooding were proposed. However, in the process of inundation analysis, the analysis considering the city's buildings was not conducted, resulting in a problem that the degree of flooding damage tends to be overestimated. Therefore, in this study, XP-SWMM was used to compare and analyze cases where buildings were not considered and designated as inactive areas. As a result of the study, it was analyzed if the building was not considered, the flood damaged area was 271,100 m² and the depth of submersion was 0.15 m, and if the building was considered inactive area, the flood damaged area was 172,900 m² and the depth of submersion was 0.32 m that it is under-estimated about 36% and an flow velocity around the building increased from 1.62 m/s to 1.83 m/s about 1.12 times.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.13-22
• /
• 2023

The importance of preemptive flood preparation is growing as the importance of preparing for climate change increases due to record heavy rains in the Seoul metropolitan area in August 2022. Although it is responding to flood control through reservoirs and sediment sites, the government is preparing excellent spill reduction measures through a preliminary consultation system for Low Impact Development (LID). In this study, the depth of flooding was simulated when LID technologies were applied to the Sillim 2-drain region in Dorimcheon Stream basin, an urban stream, using XP-SWMM, a two-dimensional model. In addition, the analysis and applicability of the effect of reducing rainfall runoff for the largest rainfall in a day were reviewed, and it was judged to be effective as a method of reducing flooding in urban areas. Although there is a limitation in which the reduction effect is overestimated, it is thought that the LID technologies can be a significant countermeasure as a countermeasure for small-scale flooded areas where some flooding occurs after structural flooding measures are established.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.1
• /
• pp.13-21
• /
• 2023

As problems such as difficulties in securing stable energy resources and global warming due to the emission of greenhouse gases due to the use of fossil fuels have emerged, interest in the development of renewable energy is increasing. Since the tidal phenomenon has a regularity that occurs regularly with a certain period, it is possible to predict accurately in advance, which has a advantage in terms of energy recovery. Therefore, various methods have been devised to utilize the tide as an energy source. Tidal power using barrages is a representative method that is widely operated, but the promotion of tidal power generation projects is being delayed or stopped due to the decrease in the level of water in the tidal basin, changes in water quality and in the ecosystem. In this study, a field experiment was conducted to develop and verify the performance of a tidal power device applicable to sea areas where dykes are already installed. As a result of carrying out four cases of experiments using two water tanks, pipe lines, open channels, weirs, and water turbine and generator, the possibility of developing a power generation system capable of 10 kW output or more and 60% efficiency or more was confirmed. These research results can be used for small-scale tidal power by utilizing the existing dykes.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.83-90
• /
• 2023

Due to climate change, the occurrence of abnormal rainfall is increasing, and the intensity and scale of damage caused by heavy rain are increasing every year. In addition, as the frequency of heavy rains becomes more frequent, heavy rains often occur continuously, resulting in large flooding damage that has never been seen before in urban area. When near rivers and coastal areas are impermeable areas, the maximum flow increases rapidly as the rainfall intensity increases, so a comprehensive flood risk evaluation is needed considering the characteristics of the basin. In this study, the flood inundation risk evaluation was analyzed by giving scores on evaluation factors as a measure to prevent inundation in subway stations. Through the flood inundation risk evaluation process considering the comprehensive evaluation index, the flood risk evaluation was conducted on five urban railway stations with a large amount of traffic and floating population that had been inundated in the past. It is judged that by comprehensively analyzing this and establishing a inundation risk grade (grade 1 to 4) to establish a flood measure suitable for the risk grade.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.59-72
• /
• 2022

This study employed a 3-D numerical analysis based on the distinct element method to estimate the strength and deformability of a Cretaceous biotite granitic rock mass at Gijang, Busan, Korea. A workflow was proposed to evaluate the scale effect and the representative elementary volume (REV) of mechanical properties for fractured rock masses. Directional strength and deformability parameters such as block strength, deformation modulus, shear modulus, and bulk modulus were estimated for a discrete fracture network (DFN) in a cubic block the size of the REV. The size of the mechanical REV for fractured rock masses in the study area was determined to be a 15 m cube. The mean block strength and mean deformation modulus of the DFN cube block were found to be 52.8% and 57.7% of the intact rock's strength and Young's modulus, respectively. A constitutive model was derived for the study area that describes the linear-elastic and orthotropic mechanical behavior of the rock mass. The model is expected to help evaluate the stability of tunnels and underground spaces through equivalent continuum analysis.

• Particle and aerosol research
• /
• v.19 no.4
• /
• pp.111-128
• /
• 2023

Chungcheongnam-do has various emission sources, including large-scale facilities such as power plants, steel and petrochemical industry complexes, which can lead to the severe PM pollution. Here, we measured concentrations of PM₁₀, PM_2.5, and its metallic elements at a suburban site in Taean, Chungcheongnam-do from September 2017 to June 2022. During the measurement period, the average concentrations of PM₁₀ and PM_2.5 were 58.6 ㎍/m³ (9.6~379.0 ㎍/m³) and 35.0 ㎍/m³ (6.1~132.2 ㎍/m³), respectively. The concentration of PM₁₀ and PM_2.5 showed typical seasonal variation, with higher concentration in winter and lower concentration in summer. When high concentrations of PM_2.5 occurred, particulary in winter, the fraction of Zn and Pb components considerably increased, indicating a significant contribution of Zn and Pb to high-PM_2.5 concentration. In addition, Zn and Pb exhibited the highest correlation coefficient among all other metallic elements of PM_2.5. A backward trajectory cluster analysis and CPF model were performed to examine the origin of PM_2.5. The high concentration of PM_2.5 was primarily influenced by emissions from industrial complexes located in the northeast and northwest areas.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.100-118
• /
• 2015

This study established a land-cover classification method on objects using satellite images, and figured out distributional patterns of land cover according to categories through spatial statistics techniques. Object-based classification generated each land cover classification map by spectral information, texture information, and the combination of the two. Through assessment of accuracy, we selected optimum land cover classification map. Also, to figure out spatial distribution pattern of land cover according to categories, we analyzed hot spots and quantified them. Optimal weight for an object-based classification has been selected as the Scale 52, Shape 0.4, Color 0.6, Compactness 0.5, Smoothness 0.5. In case of using the combination of spectral information and texture information, the land cover classification map showed the best overall classification accuracy. Particularly in case of dry fields, protected cultivation, and bare lands, the accuracy has increased about 12 percent more than when we used only spectral information. Forest, paddy fields, transportation facilities, grasslands, dry fields, bare lands, buildings, water and protected cultivation in order of the higher area ratio of DMZ according to categories. Particularly, dry field sand transportation facilities in Yanggu occurred mainly in north areas of the civilian control line. dry fields in Cheorwon, forest and transportation facilities in Inje fulfilled actively in south areas of the civilian control line. In case of distributional patterns according to categories, hot spot of paddy fields, dry fields and protected cultivation, which is related to agriculture, was distributed intensively in plains of Yanggu and in basin areas of Cheorwon. Hot spot areas of bare lands, waters, buildings and roads have similar distribution patterns with hot spot areas related to agriculture, while hot spot areas of bare lands, water, buildings and roads have different distributional patterns with hot spot areas of forest and grasslands.