• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.345-352
• /
• 2017

The average global temperature on Earth has increased by about $0.85^{\circ}C$ since 1880 due to the global warming. The temperature increase affects hydrologic phenomenon and so the world has been suffered from natural disasters such as floods and droughts. Therefore, especially, in the aspect of water deficit, we may require the accurate prediction of water demand considering the uncertainty of climate in order to establish water resources planning and to ensure safe water supply for the future. To do this, the study evaluated future water balance and water deficit under the climate change for Anseong river basin in Korea. The future rainfall was simulated using RCP 8.5 climate change scenario and the runoff was estimated through the SLURP model which is a semi-distributed rainfall-runoff model for the basin. Scenario and network for the water balance analysis in sub-basins of Anseong river basin were established through K-WEAP model. And the water demand for the future was estimated by the linear regression equation using amounts of water uses(domestic water use, industrial water use, and agricultural water use) calculated by historical data (1965 to 2011). As the result of water balance analysis, we confirmed that the domestic and industrial water uses will be increased in the future because of population growth, rapid urbanization, and climate change due to global warming. However, the agricultural water use will be gradually decreased. Totally, we had shown that the water deficit problem will be critical in the future in Anseong river basin. Therefore, as the case study, we suggested two alternatives of pumping station construction and restriction of water use for solving the water deficit problem in the basin.

• Economic and Environmental Geology
• /
• v.54 no.4
• /
• pp.441-456
• /
• 2021

The Cretaceous Duwon Formation was studied on the basis of sedimentologic analysis in order to unravel geologic conditions for the development of the streamflow-dominated alluvial fan under arid to semi-arid climatic conditions. The Duwon Formation unconformably overlies the Paleoproterozoic gneiss (basement). Based on the sedimentologic analysis, the Duwon Formation is interpreted to have been deposited in gravelly braided stream (FA-1) near the basement, laterally transitional to sandy braided stream (FA-2) and floodplain environments (FA-3) with distance (< 7 km) from the basement. Lateral changes in sedimentary facies and the well development of calcrete nodules in FA-3, together with radial paleocurrent directions measured in FA-1, are suggestive of the deposition of the Duwon Formation in streamflow-dominated alluvial fan under arid to semi-arid climatic conditions. Recent analysis of detrital zircon chronology suggests that sediments of the Duwon Formation were derived from the southwestern part of the Korean peninsula, including the western part of Yeongnam Massif and the southwestern part of Okcheon Belt. This implies the alluvial fan where the Duwon Formation accumulated had the large drainage basin. Because the large drainage basin can supply the significant amounts of water and temporarily store the sediments within the basin, watery floodwater carried sediments to the alluvial fan rather than the debris flows. Furthermore, the drainage basin largely composed of coarse-grained metamorphic and igneous rocks produced sand-grade sediments, preventing evolution of floodwater into debris flows. We suggest that combined effects of the large drainage basin and its coarse-grained metamorphic and igneous rocks provided favorable conditions for the development of streamflow-dominated alluvial fan, despite arid to semi-arid climatic conditions during sedimentation.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.29-35
• /
• 2013

The exploration areas for maritime resources such as oil and natural gas have gradually moved to deep sea areas. It has become difficult to use existing fixed marine structures, which are very costly to build, because that have reached the uppermost economic limit. Therefore, floating marine structures and flexible marine structures are preferred. In particular, slender bodies such as risers and pipes are important parts of ocean depth marine structures. These slender bodies have more flexible structural characteristics in deep water areas because their overall length becomes longer and thediameter/length slenderness ratio gets smaller. In addition, the dynamic behavior of slender bodies becomes complicated as external forces such as tides and waves act on it directly. In this study, in order to solve these problems, we performed model tests in a 2-D wave basin using flexible slender bodies with different modulus of elasticity values. As a result, we compiled statistics and compared the behaviors of flexible slender bodies with respect to the effect of the modulus of elasticity. We expect that the results could be used as reference data for the design of structures with flexible elements.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.269-281
• /
• 2014

This paper examines the suitability of using the Computational Fluid Dynamics (CFD) tools, ANSYS-CFX, as an initial analysis tool for predicting the drag and propulsion performance (thrust and torque) of a concept underwater vehicle design. In order to select an appropriate thruster that will achieve the required speed of the Underwater Disk Robot (UDR), the ANSYS-CFX tools were used to predict the drag force of the UDR. Vertical Planar Motion Mechanism (VPMM) test simulations (i.e. pure heaving and pure pitching motion) by CFD motion analysis were carried out with the CFD software. The CFD results reveal the distribution of hydrodynamic values (velocity, pressure, etc.) of the UDR for these motion studies. Finally, CFD bollard pull test simulations were performed and compared with the experimental bollard pull test results conducted in a model basin. The experimental results confirm the suitability of using the ANSYS-CFX tools for predicting the behavior of concept vehicles early on in their design process.

• Asian Journal of Innovation and Policy
• /
• v.6 no.1
• /
• pp.58-84
• /
• 2017

This article aims at demonstrating location specific approach for agricultural technology promotion and adoption in improving the livelihood of the small farmers in the haor basin and coastal belt of Bangladesh. Innovative technologies that have potentials are initially screened by ex-ante investigation and instrumented by the business model canvas, which is used as a bottom-up approach for sustainability of the adoption of proposed technology innovations. Village-level extension farmers, sub-district extension officers and farmers' cooperative are the unique and central features to the business models and forward linkages. Extension service, power tiller, low-lift pump, sunflower, shallow tube well, quality seed, forward linkage for farmed duck eggs, live ducks and open catch fish etc. are the suggested potential technology innovations for the small farmers. The technology adoption business model can be reinvented for different locations within or beyond the country considering the local agricultural problems and prospects for greater sustainability.

• Journal of Environmental Impact Assessment
• /
• v.10 no.2
• /
• pp.99-108
• /
• 2001

This study was performed to develop an information processing system for the sound conservation of soil and groundwater resources. The system contains numerical models and geographic information systems for underground flow and contamination. Multidimensional Finite Element Model for Subsurface Environment (MFEMSE) was invented to analyze underground flow and pollution problems of water and gas phases. Newly developed and conventional models (MODFLOW, MOC3D, MT3D, PMPATH, PEST, UCODE) were integrated with GIS (ArcView) for the construction of an integrated information management system of subsurface environment. This system was applied to the management of three mineral water companies located in clean high mountain basin. Desirable management criteria and operational strategies were suggested using this system. The system was constructed to be applied for the broad sense of decision supporting tools in related topics of this study, so that it can be used not only for the prevention regulations, but also for clean up projects.

• Journal of Environmental Science International
• /
• v.20 no.12
• /
• pp.1635-1646
• /
• 2011

This April 5th dam and Hwanggang dam, which are located in Imjin river, North Korea, become the main causes of water shortages and damages in Imjin river downstream. April 5th dam is assumed a small or medium-sized dam, its total storage volume reaches about 88 million $m^3$. And Hwanggang dam, multi-purposed dam of total storage volume approximately 0.3 billion $m^3$ to 0.4 billion $m^3$ is used as source of residental or industrial water in Gaeseong Industrial Complex. North Korea, which has April 5th dam and Hwanggang dam in Imjin river, manages water of approximately 0.39 billion $m^3$ to 0.49 billion $m^3$ directly. As water is storaged or discharged through dam, it causes a severe damage to areas in Yeoncheon-gun and Paju city, South Korea. Therefore, this study intends to analyze and estimate runoff through dam construction by using hydrological observation data and artificial data such as service water supply and agricultural water in Imjin river, water shortage and damage correctly.

• Development and Reproduction
• /
• v.18 no.4
• /
• pp.241-249
• /
• 2014

Hyphessobrycon eques is a famous fish for ornamental fish market and aquarium. They are inhabit in regions of Amazon and Paraguay River basin. Serpae fishs were investigated 2-3 males are chased to female, and then males attempted to simulate the females abdomen. After fertilization, eggs were kept in incubators at $28^{\circ}C$. The fertilized eggs had adhesive and demesal characteristics and had a mean diameter of $0.92{\pm}0.01mm$. Larvae hatched at 16 hrs post fertilization. The hatched larvae averaged $2.90{\pm}0.16mm$ in total length ($L_T$). Complete yolk sac resorption and mouth opening occurred on the third day post hatching. At 45 days post hatching, the larvae were $12.5{\pm}1.60mm$ $L_T$ and had reached the juvenile stage.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.465-468
• /
• 2008

Two half circular structures are developed in the northern and southern blocks which divided by the WNW-trending lineament around Uiryeong-Haman area, southern part of the Gyeongsang basin. By displacing one half circular structure to the other one about 750 m, a perfect circular structure is reconstructed. Thus the WNW-trending lineament is a left-lateral fault displacing the circular structure. The NNW trending ridges are dragged with anticlockwise sense near the WNW-trending fault, which indicates also the existence of a sinistral movement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.371-371
• /
• 2012

연속된 강우 관측 자료로부터 강우사상을 분리하는 것은 수문 분석에서 매우 기초적인 부분이다. 하지만 이를 분리하는 표준적인 방법은 아직 정해진 것이 없다. 보편적으로 강우사상의 분리에 강우사상간 (무강우)시간정의(IETD; Inter-event Time Definition)을 사용하고 있으며, 이는 강우사상간 최소 (무강우)시간(MIT; Minimum Inter-event Time, 이하 '강우사상간 최소 무강우 시간' 이라고 함.)이라고도 한다. 강우사상간 최소 무강우 시간을 결정하기 위해 사용되는 방법으로는 자기 상관계수를 이용하는 방법과 순위상관계수를 이용하는 방법, 강우사상간 무강우시간에 대한 변동계수를 이용하는 방법, 연간 호우 발생수를 이용하는 방법 등이 있다. 본 연구에서는 한강수계 강우의 강우사상간 최소 무강우 시간을 고찰하기 위해 한강수계 국토해양부에서 운영 중인 한강수계 강우관측소의 자료를 대상으로 앞서 제시한 4가지 방법을 적용하여 각 방법 간의 차이를 비교하여 보았으며, 더불어 개별 강우관측소의 자료와 티센망을 이용한 유역평균강우량을 사용했을 때 강우사상간 최소 무강우 시간의 차이를 비교하여 보았다.