• Journal of Pharmaceutical Investigation
• /
• v.4 no.1_2
• /
• pp.46-54
• /
• 1974

A new spectrophotemetric method was estalished for the determination of oleic acid. This method is based on the 1,2-dichloroe-thane extraction of the ion-pair formed between methylene blue and oleic acid. But the absorbance of an ion-pair in the 1,2-dichloroe-thane layer was variable with the temperature, the ion-pair was extracted back into a diluted hydrochloric acid solution. The maximum absorbance of the acid extract observed at $660m{\mu}$ and a lineal relationship was observed from the initial amount over the range of $50-800{\gamma}/ml$ of oleic acid in the aqueous phase. The composition ratio of the ion-pair formed between methylene blue and oleic acid was determined to be 2 : 1 by both the mole ratio and continuous variation methods.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2001

Amur cork tree is natural basic and yellow dye largely used for dyeing on cotton. The most effective solvent for extract of berberine from amur cork tree was methanol. The dyeabilities of the colorant on cotton and the fastness of cotton fabrics dyed with amur cork tree extract were investigated. And according to the concentration, temperature and time of pre-treatment, K/S values, wash fastness and Hand Value of cotton fabrics dyed with amur cork tree extract were investigated. As a results, K/S values of dyed cotton fabrics were increased by Pre-treatment with chinese gallotannin and the optimum condition of chinese gallotannin treatment was 15%owf concentration at $60^\circ{C}$, 30min. The wash fastness was enhanced to 3.5 grades. There was no degradations of Hand Value of cotton fabrics treated with chinese gallotannin.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2261-2266
• /
• 2013

This paper describes the synthesis and water sensing properties of a fluorescent photoinduced electron transfer (PET) sensor (5) with an extended operating sensing range. The 1,8-naphthalimide derivative (5) attached with a piperazine group and a carboxylic group was synthesized and applied as a fluorescent water sensor in water-miscible organic solvents. The fluorescence intensity of the dye 5 increased with increasing water content up to 80% (v/v) and the fluorescence intensities were enhanced 45-, 67- and 122-fold in aqueous EtOH, DMF and DMSO solutions, respectively. In aqueous acetone solution, the enhancement of the fluorescence intensities was somewhat lower (30-fold) but the response range was wider (0-90%, v/v).

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.336-338
• /
• 2016

Recent multifunctional two-dimensional material research has triggered huge interests in various modifications for substitution of atoms. Instead of novel metals used as the most popular catalysts, nonprecious transition metals are promising candidates for efficient oxidation-reduction transfers. The recent discovery of $Co@C_2N$ has an alternate possiblity as catalysts for the ORR(Oxygen Reduction Reaction) in DSSc(Dye Sensitized Solar Cell) and OER(Oxygen evolution cobalt oxides). Here we report spin-polarized DFT calculations of the structure doped Iron that is one of ferromagnetism atoms like Co to provide a basic desciption of the ferromagnetism of the elemental metals. The spin-density-funtional results present the most stable state energetically is when having pairwise up/down spin.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.311-324
• /
• 2018

Herein,the Neodymium ion ($Nd^{3+}$) doped CoAl-LDH have been successfully prepared via co-precipitation method and was used as a precursor of Nd-doped CoAl-mixed metal oxides (MMO). The photocatalytic activity of doped LDH and MMO was investigated in the degradation of an azo dye, C.I. Acid Red 14, under visible light irradiation. DRS and PL analysis demonstrated decreasing in the band gap energy and recombination of photo-induced charge carriers of Nd-doped LDH and MMO compared with the pristine CoAL-LDH. Due to significant difference in photocatalytic performance. A power law empirical kinetic model was obtained for predicting the photocatalytic degradation efficiency.

• Nuclear Engineering and Technology
• /
• v.4 no.2
• /
• pp.90-101
• /
• 1972

Radiation grafting of acrylic acid to Polyester fabric has been studied by an impregnation method to render its surface more hydrophilic. Impregnated fabric was irradiated under nitrogen with gamma-ray from Co-60. The homopolymer formed usually could be extracted with water at 10$0^{\circ}C$. Graft-fabric exhibited a good acceptability to acid, basic or disperse dyes in conventional aqueous dye bath at moderate temperature.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.55-58
• /
• 1989

The methods of recording transient phenomena with picosecond or better resolution fall into two basic categories: those in which the detector itself prossesses adequate time resolution for the task at hand, and those in which the response of the system is sampled by examining the characteristics of a second pulse ("the probe") delayed in time from the initiating pulse ("the pump") as a function of time delay between pump and probe cases. In this case the time resolution is only limited by the pump-and probe-pulse durations. As an application of this time-resolved spectroscopic technique, the ultrafast orientational relaxation phenomena of the dye molecules are currently under investigation in our laboratory. In this presentation the status of our experiment is summarized.iment is summarized.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.47-47
• /
• 2011

최근 m-Aramid 섬유의 염색에 대한 연구가 진행되면서 기존의 원착법 및 초고온고압법 등 상업성이 낮거나 제약이 많았던 염색법에서 차츰 cationic dye를 이용한 염색법이 상용화되고 있다. m-Aramid 섬유는 amide기의 분자 간 수소결합으로 인하여 결정화도를 증가시킴으로서 고강도, 고탄성의 특성을 가질 수 있지만, 강력한 분자구조와 고결정성의 치밀구조로 인하여 염료가 섬유의 분자구조 내부로 확산, 염착되기 어려운 단점을 가지기도 한다. 따라서 m-Aramid 섬유를 침염법으로 염색 시, 섬유의 치밀구조를 이완시켜줄 수 있는 swelling agent가 중요하게 작용한다. 본 연구에서는 cationic dye를 이용하여 swelling agent의 영향성을 살펴보았다. 사용된 시료는 100% m-Aramid 섬유이며, C.I. Basic Yellow 28, Red 46, Blue 54를 사용하여, 욕비 1:10, $NaNO_3$ 7g/l의 조건으로 $130^{\circ}C{\times}60$분간 염색하였다. 이때 사용된 Swelling agent는 두 가지로 각각 1-phenoxypropan-2-ol(S1)과 N-methyl formanilide(S2)를 주성분으로 한다. 염색 시 염료의 농도는 0.5~7% o.w.f.이며, 염색 전 후 염욕을 UV-VIS을 통해 absorbance값을 측정하여 산출한 염착율과, CCM을 사용하여 최대흡수 파장에서 산출 된 K/S값을 비교 고찰 하였다. 각각의 염색물을 비교한 결과 Red 염료를 제외한 yellow 및 blue 모두 3% o.w.f. 염료농도까지 90% 이상의 흡착율을 보였으며, S1에 비해 S2의 경우 염착율이 근소하게 높은 결과를 보였다. 반면 K/S 값을 비교해보면, S2를 사용하였을 때 10%~60% 높은 K/S값을 보였다. 염착율은 비슷하지만 K/S값의 차이를 보이는 이유는 염색이 끝난 후 수세과정에서 섬유표면에 미고착된 염료들이 빠져나가는 것으로, 이를 통해 S2의 경우 섬유의 내부로 염료를 잘 고착시켜 줌으로서 수세안정성이 S1에 비에 우수한 결과를 보인 것으로 고찰된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.379-385
• /
• 2006

A stacked white organic light-emitting diode (OLED) having a blue/orange emitting layer was fabricated by synthesizing nitro-DPVT, a new derivative of the blue-emitting material DPVBi on the market. The white-emission of the two-wavelength type was successfully obtained by using both nitro-DPVT for blue~emitting material, orange emission as a host material and Rubrene for orange emission as a guest material. The basic structure of the fabricated white OLED is glass/ITO/NPB$(200{\AA})$/nitro-DPVT$(100{\AA})$/nitro-DPVT:$Rubrene(100{\AA})/BCP(70{\AA})/Alq_3(150{\AA})/Al(600{\AA})$. To evaluate the. characteristics of the devices, firstly, we varied the doping concentrations of fluorescent dye Rubrene from 0.5 % to 0.8 % to 1.3 % to 1.5 % to 3.0 % by weight. A nearly pure white-emission was obtained in CIE coordinates of (0.3259, 0.3395) when the doping concentration of Rubrene was 1.3 % at an applied voltage of 18 V. Secondly, we varied the thickness of the NPB layer from $150{\AA}\;to\;200{\AA}\;to\;250{\AA}\;to\;300{\AA}$ by fixing doping with of Rubrene at 1.3 %. A nearly pure white-emission was also obtained in CIE coordinates of (0.3304, 0.3473) when the NPB layer was $250-{\AA}$ thick at an applied voltage of 16 V. The two devices started to operate at 4 V and to emit light at 4.5 V. The external quantum efficiency was above 0.4 % when almost all of the current was injected.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.105-112
• /
• 2017

A string wallcovering is a kind of textile wallcovering which is made of cellulose fiber yarn laminated on base paper. Compared with normal paper or PVC wallpaper, a string wallcovering is preferred continually in the interior design market, as it is not only environmentally friendly but it also has less cost on mass production without the weaving process and has a natural visual effect, excellent functionality such as thermo keeping, permeability, sound absorption. However, in the dyeing process, it is not appropriate to use plenty of energy such as water, electricity, steam or chemicals considering the environmental trend and the government policy plenty of energy such as water, electricity, steam or chemicals. Currently, a string wallcovering is made of raw white yarn and padding with direct dye or pigment which includes toxic elements, especially the use of direct dye is restricted in a part of the developed country due to inclusion of azo. In this study, we researched dyeing based on cold pad batch dyeing of a string wallcovering with reactive dyestuff. The peel strength and bending depth test confirmed that the optimum adhesive type and spread amount improved the water resistance of the string wallcovering. Also, pad batch dyeing with optimum reactive dyestuff enhanced the color fastness to light and rubbing in dry and wet conditions. Additionally, for improvement of color fastness to rubbing in a wet condition, the additional treatment finishing without soaping process which is used water. The results of this study can be used as basic data for environmentally friendly and energy saving of the textile wallcovering.