• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.193-199
• /
• 2016

Since the variations of electromagnetic suspension forces of maglev trains have close relations with the acceleration of the levitated bodies, it is basic to control the levitation forces using the measured acceleration of vehicles. In this study, an airgap control algorithm based on acceleration feedback is applied to maglev trains and a dynamic analysis method is developed considering maglev train-guideway interaction. Using the developed method, dynamic behaviors of a maglev train-guideway interaction system are investigated. It is observed from the analysis that the current design guidelines can be satisfied when the proposed airgap control algorithm is employed. Using the contorl algorithm, the current guidelines can be improved and economical maglev railway guideway structures can be designed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.1-8
• /
• 2005

In this paper, we present design and prototyping of a low-cost, integrated multi-functional micro health sensor chip that can be used or embedded in widely consumer devices, such as cell phone and PDA, for monitoring environmental condition including air pressure, temperature and humidity. This research's scope includes basic individual sensor study, architecture for integrating sensors on a chip, fabrication process compatibility and test/evaluation of prototype sensors. The results show that the integrated TPH sensor has good characteristics of ${\pm}\;1\%FS$ of linearity and hysteresis for pressure sensor and temperature sensor and of ${\pm}\;5\%FS$ of linearity and hysteresis But if we use 3rd order approximation for humidity sensor, full scale error becomes much smaller and this will be one of our future study.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.76-84
• /
• 2009

This paper proposes a SOC platform which is eligible for education and application SOC design. The platform, fully synthesizable and reconfigurable, includes the OpenRISC embedded processor, some basic peripherals such as GPIO, UART, debug interlace, VGA controller and WISHBONE interconnect. The platform uses a set of development environment such as compiler, assembler, debugger and RTOS that is built for HW/SW system debugging and software development. Designed SOC, IPs and Testbenches are described in the Verilog HDL and verified using commercial logic simulator, GNU SW development tool kits and the FPGA. Finally, a multimedia SOC derived from the SOC platform is implemented to ASIC using the Magnachip cell library based on 0.18um 1-poly 6-metal technology.

• Journal of architectural history
• /
• v.7 no.3 s.16
• /
• pp.53-66
• /
• 1998

In the meantime, the study of traditional and contemporary house had been produced so many achievements in korea, but modern house is yet to be solved, Accordingly, It is necessary to develop and present the basic research data in order to build up an objective study for urban house in the modern age(1910-1945), Following to a study on the foreigner's house in grid-type settlement of Open Ports, in this research is to investigate and analyze modern houses of urban areas in korean inland, and then clarify types and changes of them. In the first year($1995{\sim}96$), the modern houses of Central Inland Districts(arrounding river Kumgang)-Kunsan kanggyong Puyo Kongju Pugang Chongju were investigated by the layout of room, the construction and materials, the design and style, etc. In the second year($1996{\sim}97$), the modern houses of Open Market(開市場)-Seoul Taegu Kwangju Taejon Chonju were conducted to investigate as above. The traditional house transformed by differentiation and addition of room(kan), the various types were respectively adopted for the korean reforming and western cultural house. In the layout of room, the types of plan were gradually concentrated from the single wings of korean traditional house. The korean traditional house was later improved through the introduction of entrance, corridor, and internal toilet/bathroom. But the korean under-floor heating system(andal) and a series of three rooms had been entirely maintained, composed of master bedroom/living room(daechung)/room. And the traditional town house with shop and storage, being built closely to each other and walled up both sides, it had taken gradually the extensive characteristics in itself. By the displacement of shop/dwelling/ storage. the various types were respectively adopted for the separated, multi-storied, and complex type. The type of them was gradually changed to the narrow and linear form. And so with the stockpile of fundamental datas about modern houses in korean urban areas, we expect these results contribute to the knowledge of the spatial characteristics of urban house at present which are required to the understanding of transition as well as types.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.2
• /
• pp.45-49
• /
• 2019

The purpose of this study is to study how to draw up a safety guarantee certificate and its future expected effects in connection with the Industrial Safety and Health Act as it becomes mandatory to draw up a safety guarantee led by the owner who exercises practical decision-making authority and pays for the construction work. Therefore, Therefore, this study predicts the expected effects of the health and safety guarantee on the construction industry and the weaknesses that future health and assurance have in settling in the construction industry in relation to the revised Act on Industrial Safety and Health. And It will be used as basic data on the changes that will be brought by the shipper-led preemptive safety and health management system, as well as strengthening responsibilities and safety for the role of the shipper in the construction industry.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.3
• /
• pp.134-139
• /
• 2017

Objective: Dual-task interference is defined as decrements in performance observed when people attempt to perform two tasks concurrently, such as a verbal task and walking. The purpose of this study was to investigate the changes of gait ability according to the dual task interference in chronic stroke survivors. Design: Cross-sectional study. Methods: Ten chronic stroke survivors (9 male, 1 female; mean age, 55.30 years; mini mental state examination, 19.60; onset duration, 56.90 months) recruited from the local community participated in this study. Gait ability (velocity, paretic side step, and stride time and length) under the single- and dual-task conditions at a self-selected comfortable walking speed was measured using the motion analysis system. In the dual task conditions, subjects performed three types of cognitive tasks (controlled oral word association test, auditory clock test, and counting backwards) while walking on the track. Results: For velocity, step and stride length, there was a significant decrease in the dual-task walking condition compared to the single walking condition (p<0.05). In particular, higher reduction of walking ability was observed when applying the counting backward task. Conclusions: Our results revealed that the addition of cognitive tasks while walking may lead to decrements of gait ability in stroke survivors. In particular, the difficulty level was the highest for the calculating task. We believe that these results provide basic information for improvements in gait ability and may be useful in gait training to prevent falls after a stroke incident.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1221-1228
• /
• 2016

In this paper, we propose a modified rhombus slot UWB(Ultra Wide Band) antenna with fork-shaped feeding structure. The proposed antenna is modified rhombus slot structure and fork-shaped feeding structure to get ultra-wideband characteristics for UWB communication. Modified rhombus slot structure consists of slot shaped which eliminated upper and lower part of the basic rhombus slot. The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $34mm(W_1){\times}34mm(L_1){\times}1mm(t)$, and its slot antenna size is $30mm(W_2){\times}16.75mm(L_3+L_4)$. After carrying out the simulation of each parameters, optimized values are obtained. From the fabricated and measured results, return loss of the proposed antenna satisfied Return Loss -10dB in 3.1 ~ 10.6 GHz. And measured results of gain and radiation patterns characteristics displayed for operating bands.

• PNF and Movement
• /
• v.16 no.2
• /
• pp.217-227
• /
• 2018

Purpose: The purpose of this study is to examine the effects of proprioceptive neuromuscular facilitation (PNF) exercises on the neck disability index and deep neck flexor endurance of acute whiplash injury patients and to provide basic data for PNF exercises for musculoskeletal system disorder patients. Methods: Twenty acute whiplash injury patients were randomly assigned to an experimental group (n=10) and were treated with PNF exercises whereas a control group (n=10) underwent general exercises. Each session lasted 15 minutes and was performed five times a week for two weeks. The degree of pain was assessed using a visual analogue scale (VAS) and the degree of neck disability was measured by the neck disability index (NDI). Craniocervical flexor endurance (CCFE) tests were conducted to measure deep neck flexor endurance. Results: In terms of the intragroup changes in VAS, NDI, and CCFE, there were significant decreases in both the experimental and the control groups. After intervention, there were significant differences between the experimental group and the control group in terms of intergroup changes in VAS, NDI and CCFE. Conclusion: Although the exercises that are generally applied to acute whiplash injury patients are effective on the whole, PNF exercises are considered to be beneficial, given the improvements in the neck disability index and deep neck flexor endurance.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.583-590
• /
• 2006

BT technology, medical treatment engineering technology is offering important role and grow by creative technology. Specially, bone fracture treatment can achieve very important role in research of bone, physiology and dynamics of bone is very useful patient's diagnostic and treatment in presence at a sickbed. <중략>Furthermore embedded base of in administration aspect as well as if supersonic waves curer is treatment innocuously and without invasion very efficient tell. If apply supersonic waves in bone fracture treatment, can reduce curer about 40%. Operation frequency through bone fracture treatment supersonic waves curer of embedded base designs and manufactured 1m Hz, 1.2mHz, 1.3mHz, 1.4mHz, supersonic waves origination that have 1.5mHz's tranducer, and embodied protocol in PDA base in this research, and did so that is interfaced to general PC. If is using but supplement research water that see clinically by diagnosis in city, is seen to become convenient medical treatment assistance mounting to bone fracture patient's treatment and courtesy call. Specially, tried to approach basic form after modeling processing if may be applied variously to physiotherapy, orthopaedics patient who gouge late, and study standardization special quality little more.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.135-143
• /
• 2002

In this study, Multi-Values Logic processor was designed using the basic circuit of the electric current mode CMOS. First of all, binary FFT(Fast courier Transform) was extended and high-speed Multi-Valued Logic processor was constructed using a multi valued logic circuit. Compared with the existing two-valued FFT, the FFT operation can reduce the number of transistors significantly and show the simplicity of the circuit. Moreover, for the construction of amount was used inside the FFT circuit with the set of redundant numbers like {0, 1, 2, 3}. As a result, the defects in lines were reduced and it turned out to be effective in the aspect of normality an regularity when it was used designing VLSI(Very Large Scale Integration). To multiply FFT, the time and size of the operation was used toed as LUT(Lood Up Table).