• 한국융합학회논문지
• /
• 제4권3호
• /
• pp.27-33
• /
• 2013

기존의 바코드는 정보 배열이 나란히 나열된 선 모양을 가지며 이를 1차원 바코드라 부른다. 이에 반해 2차원 바코드는 점자방식 또는 모자이크방식 코드로 작은 정사각형 도는 직사각형 안에 정보를 표현한다. 2차원 바코드는 기존의 1차원 바코드보다 작은 공간에 많은 데이터를 표현 가능함으로써 보다 효율적인 바코드의 구현이 가능하다. 현재 ISO 국제 표준화된 2차원 바코드는 총 4가지로 분류되는데 QR Code, Data Matrix, PDF417, MaxiCode가 있다. 본 논문에서는 ISO 국제 표준화된 바코드 중 하나인 Data Matrix의 Base 256 모드에 대한 기본 개념, 구성 방법, 인코딩 및 디코딩 방법을 상세히 제안한다. Data Matrix 심벌에 저장된 데이터를 보다 효율적으로 구성하기 위해 숫자, Alphanumeric 문자, 이진법에 따라 다른 인코딩, 디코딩 방법을 사용하게 되는데 본 논문에서는 이를 고려한 디코딩 방법에 초점을 맞춰 기술할 것이다.

• 전자공학회논문지C
• /
• 제34C권8호
• /
• pp.1-7
• /
• 1997

In tis paper, w eproposed a modeling for direct-sequence spread communication base band modem in RT-level VHDL and implemented in a one-chip VLSI and tested. The transmitter modulates with DQPSK modulation method and spreads a modulated signal with 32-bit PN code into 1.152MHz. The receiver de-spreads a signal using 32-tap matched filter and recovers with DQPSK demodulation method. The digital frequency synthesizer generates the sine signal and the cosine signal of 2.304MHz with ROM tables in the size of 7$\^$*/256 and 6$\^$*/256, respectively. The implemented VLSI has been verified a BER with 10$\^$-4/ at E$\_$b//N$\_$o/ of 13dB with a SPW fixed design model and fabricated in the 0.8.mu.m KG6423 gate array with a VHDL model.

• ETRI Journal
• /
• 제34권2호
• /
• pp.256-259
• /
• 2012

The double-base number system has been used in digital signal processing systems for over a decade because of its fast inner product operation and low hardware complexity. This letter proposes an innovative multiplier architecture using hybrid operands. The multiplier can easily be linked to flash analog-to-digital converters or digital systems through a double-base number encoder (DBNE) for realtime signal processing. The design of the DBNE and the multiplier enable faster digital signal processing and require less hardware resources compared to the binary processing method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.256-262
• /
• 1999

By development of heat resistant alloy, there are much improvement of gas turbine engines. But heat resistant alloy has difficulty of machining. therefore, ECM (Electrochemical Machining) is used for Machining of 3 dimensional curved surface of Ni-base alloy. The purpose of this paper is to investigate ECM parameters that make tile good surface for Ni-base alloy blade. For this purpose, we have been investigated that center line average surface roughness(R$\sub$a/), average R$\sub$a/, Maximum R$\sub$a/ and Standard deviation of R$\sub$a/ for measuring positions is influenced on ECM parameters such as electrolyte types, dwell time, electrolyte pressure and sort of electrolyte for Inconel 718 and Waspaloy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.256-256
• /
• 2009

This paper presents a proper condition to achieve above 17 % conversion efficiency using PC1D simulator. Crystalline silicon wafer with thickness of $240{\mu}m$ was used as a starting material. Various efficiency influencing parameters such as rear surface recombination velocity and minority carrier diffusion length in the base region, front surface recombination velocity, junction depth and doping concentration in the Emitter layer. Among the investigated variables, we learn that 2nd doping concentration as a key factor to achieve conversion efficiency higher than 17 %.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.256-266
• /
• 2012

Cavitating flow simulation is of practical importance for many engineering systems, such as marine propellers, pump impellers, nozzles, torpedoes, etc. The present work has developed the base code to solve the cavitating flows past the axisymmetric bodies with several forebody shapes. The governing equation is the Navier-Stokes equation based on homogeneous mixture model. The momentum is in the mixture phase while the continuity equation is solved in liquid and vapor phase, separately. The solver employs an implicit preconditioning algorithm in curvilinear coordinates. The computations have been carried out for the cylinders with hemispherical, 1-caliber, and 0-caliber forebody and, then, compared with experiments and other numerical results. Fairly good agreements with experiments and numerical results have been achieved. It has been concluded that the present numerical code has successfully accounted for the cavitating flows past axisymmetric bodies. The present code has also shown the capability to simulate ventilated cavitation.

• Journal of Communications and Networks
• /
• 제14권3호
• /
• pp.252-256
• /
• 2012

We consider resource allocation in femto-cell networks to maximize the throughput while minimizing interference to macro-users nearby. This can be achieved by allocating spectrum resource in a cognitive radio way. The proposed resource allocation is performed in two steps; spectrum sensing and resource scheduling. The femto base station detects idle frequency assignments (FAs) free from the occupation by macro-users and then allocates sub-channels in an idle FA to femto-users, effectively managing the interference problem. Finally, the effectiveness of the proposed scheme is verified by computer simulations.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.247-256
• /
• 1999

This paper describes the results of analysis, syntheses and Roll Stability of various Di-urea greases. Di-urea greases were synthesized by reaction of 4,4'-Methylenebis(phenyl isocyanate) and various amines, such as cyclohexylamine, octylamine, stearylamine and p-toluidine with base oil at 80-180 $^{\circ}C$. The synthesized di-urea greases were analyzed by FT-R spectroscopy. The Roll Stability of synthesized di-urea greases was evaluated.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.251-256
• /
• 2005

There is few study which automatically diagnose the fault from ship's monitored signal. The bigger control and monitoring system is, the more important fault diagnosis and maintenance is to reduce damage brought forth by system fault. This paper proposes fault diagnosis system using a correlation analysis algorithm which is able to diagnose and forecast the fault and is composed to fault detection knowledge base and fault diagnosis knowledge base. For this all kinds of ship's engine room monitored data are classified with combustion subsystem, heat exchange subsystem and electric motor and pump subsystem by analyzing ship's operation data. To verifying capability of fault detection, diagnosis and prediction, Fault Management System(FMS) is developed by C++. Simulation experiment by FMS is carried out with population data set made by log book data of 2 months duration from a large full container ship of H shipping company.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.504-506
• /
• 1993

JPEG(Joint Photographic Experts Group) 표준안은 디지털 정지 압축을 위하여 국제표준화기구(ISO/SC29/WG10)와 국제전신전화 자문회의(CCITT SG VIII)에 의해서 제안되었다. JPEG 표준안은 전자영상, 컴퓨터 그래픽, 멀티미디어 등과 관련하여 널리 응용되고 있으나, 의료 영상분야에서는 JPEG 압축의 손실 특성 때문에 사용이 매우 제한적이었다. 본 논문에서는 JPEG 표준안을 핵자기 공명 단층 영상 (256 gray levels, $256{\times}256$ size) 압축에 적용하여 그 성능을 조사하였다. 이를 위하여 JPEG 표준안 중 DCT에 기반을 둔 순차식 부호화 압축을 C-Cube Microsystems의 CL550 chip을 사용하여 구현하였고, 점진식 및 무손실 부호화 방식은 특별한 Hardware 없이 Software로 구현하여 실험하였다. 본 실험을 통하여 핵자기 공명 단층 시험 영상에 대해 거의 왜곡없이 약 10-20 정도의 압축률이 얻어짐을 확인할 수 있었다. 특히 JPEG으로 압축하였을 경우 재구성한 영상과 원영상과의 에러 신호가 random noise에 가깝게 나타남으로써 특별한 artifact가 없는 것도 JPEG의 큰 장점으로 부각된다. 한편 JPEG의 점진식 및 게층식 부호화 방식은 압축률과 신호대 잡음비에 있어서는 순차식과 동일하나, 거대한 영상 데이터 베이스 내에서의 빠른 탐색과 비교적 속도가 느린 공중망을 통한 원격 진단에 유용한 특성을 갖는다.