• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1511-1517
• /
• 2000

A new slot-coupled back-to-back microstrip array antenna is proposed for using in the IMT-2000 base station or repeater antenna. This antenna is composed of symmetrical SSAIP(Strip Slot, Air Inverted Patch) It has bidirectional radiation pattern in horizontal plane and 22.5$^{\circ}$main beam squint in vertical plane. The analysis is based on the cavity model and the design is achieved using Ensemble. Experimental results for the radiation pattern and the return loss have shown that the direction of the main beam is about 21$^{\circ}$and the impedance bandwidth is approximately 22.9% Thus the proposed antenna is able to operate over both uplink and downlink frequencies in IMT-2000.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.227-238
• /
• 2010

Objective: The purpose of this study was to analyze the effect of growth hormone treatment (GHT) on craniofacial growth in children of short stature. Methods: Nineteen untreated children of short stature were referred from the Pediatric Department, Yeungnam University Hospital as a subject group. All subjects had lateral cephalograms taken before, after 1 year and after 2 years of growth hormone treatment. As a reference group, we selected 19 normal children with paired sampling who matched the subjects' age and sex, from the Department of Orthodontics, Kyungpook National University Hospital. Results: Before GHT, anterior cranial base length and upper posterior facial height, posterior total facial height, mandibular ramus length, and mandibular corpus length were significantly smaller in the reference group. In angular craniofacial measurements, saddle angle and mandibular plane angle were larger. SNA and SNB were smaller in the reference group. After two years of GHT, growth hormone accelerated growth in several craniofacial components. The posterior total facial height, the anterior, posterior cranial base length, and the mandibular ramus length were increased. And the difference in mandibular plane angle and ANB values compared with the reference group was decreased. Conclusions: GHT over 2 years leads to a craniofacial catch-up growth tendency, which is pronounced in interstitial cartilage and condylar cartilage.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.102-105
• /
• 2010

PURPOSE. The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. MATERIALS AND METHODS. In the edentulous cast of maxilla, four test groups were considered. In the first, second, third, and fourth test groups (n = 12 in each group) the separation was done at 0, 5, 10, and 15 mm, respectively below the alveolar crest along the palatal plane. For the control group, the record base was made without separating the two sections. The light-body silicone material was injected into the fitting surface of the record base. It was then placed onto the cast and finger pressure was applied to stabilize it in a seated position followed by immediate placement onto the universal test device. Finally, the mass of the impression material was measured after it was removed. ANOVA was performed using the SAS program. For the post-hoc test, the Wilcoxon Rank-Sum test and the Tukey-Kramer HSD test were performed ($\alpha$ = 0.05). RESULTS. The control group and Group 3, 4 showed significant differences. The Group 3 and 4 showed significantly smaller inside gaps than the control group which was not made with the two-phase fabrication method. CONCLUSION. The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest.

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.511-519
• /
• 1994

The effect of the deposition conditions, such as the base pressure, working pressure, sputtering power, pre-sputtering, and deposition thickness in facing targets sputtering system(FTS), on the oxidation of the TbFeCo thin films was studied by investigating the magneto-optical properties as well as oxygen analysis by the AES depth profiles. The results showed that the base pressure did not affect the magnetic properties so much, probably due to the short flight distance of the sputtered particles. At the higher sputtering power and lower working pressure with pre-sputtering the oxidation of TbFeCo thin films was decreased. As the film thickness increased the TbFeCo thin films showed the perpendicular anisotropy from in-plane anisotropy overcoming the oxidation effect at the beginning of the sputtering.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.1 s.5
• /
• pp.37-44
• /
• 1995

Cartesian coordinate systems used in national base map have 3 zones. If these coordinate systems are used at navigable digital maps without modifications, the edge-matching errors will occur near the edge of two zones. Therefore, it's required to eliminate separate zones of national plane coordinates system suitable far navigable digital map, we choose TM projection that is used at national base map but changed the location and the scale distortion of antral meridian.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1018-1024
• /
• 2001

In this paper, an array antenna is designed far base station of a street micro-cell in urban areas. It has a rectangular radiation pattern. The current distribution of the array is decided by using a modified Woodward-Lawson sampling pattern synthesis method. To confirm the realization of the array antenna with rectangular pattern, 12 array antenna with a planar type monopole fed by stripline is fabricated and measured. In the results of the measured values, H-plane pattern of the antenna nearly yields a rectangular radiation pattern.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.18-26
• /
• 2011

The necessity for services of emergency communication systems to be uninterrupted and reliable has brought forward strict requirements for express software upgrades of base stations. Based on reconfigurability technology, this paper presents a protocol reconfiguration scheme for emergency communication base stations. By introducing the concept of 'local safe state,' the proposed scheme could make the updating and replacement of the protocol software flexible and maintain interactions during the updating procedure to achieve seamless system upgrades. Further, taking TETRA protocol stack and VxWorks operating system as an example, specific processes and realization methods of reconfiguration are proposed in this paper, along with the measurements of the factors impacting on the system performance. Simulation results show that, compared with traditional technology, the method proposed significantly improves the system efficiency and does not interrupt system services.

• Journal of the Korean Professional Engineers Association
• /
• v.27 no.3
• /
• pp.121-131
• /
• 1994

It is very difficult to partially describe the hull shape made up of 3-dimensional free form surface. With computerizing skill in ship design, the geometric modeling technique has been developed. In hull shape modeling, the blending technique has not yet been adapted to the hull shape surface has a variable curvature. By adapting the blend surface, small surface on drawing plane is to be softly blended with given hull surface and a projecting part. This study has adapted to the ship design one of the blending methods by which offsets data of the blend surface can be obtained by the input of blend radius on two base surfaces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.676-684
• /
• 2000

In this study, behavior of $C_t$ which is a well-known fracture parameter characterizing creep crack growth rate, is investigated for weld interface cracks. Finite element analyses were per formed for a C(T) specimen under constant loading condition for elastic-plastic-creeping materials. In modeling C(T) geometry, an interface was employed along the crack plane which simulated the interface between weld and base metals. The $C_t$ versus time relations were obtained under various creep constant combinations and plastic constant combinations for weld and base metals, respectively. A unified $C_t$ versus time curve is obtained by normalizing $C_t$ with $C^*$ and t with $t_T$ for all the cases of material constant variations.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1715-1718
• /
• 2009

A series of sitting-atop (SAT) complexes, [(ZrO)$H_2t(X)pp(NO_3)_2$], have been prepared via the reactions of free base meso-tetraarylporphyrins, $H_2$t(X)pp, with zirconyl nitrate hydrate, ZrO(N$O_3)_2{\cdot}xH_2$O. The products have been characterized by a variety of methods including $^1H\;NMR,\;^{13}C$ NMR, IR and UV-Vis spectroscopies, elemental analysis and conductance measurements. The data indicate that the meso-tetraarylporphyrins coordinate with two pyrrolenine nitrogen atoms to the zirconyl cation located above the distorted porphyrin plane and two protons remain on the pyrrole nitrogens. Such half sandwich-type sitting-atop complexes may be considered as models for the initial steps of the metallation of the macrocycles.