• Journal of applied mathematics & informatics
• /
• v.32 no.1_2
• /
• pp.83-98
• /
• 2014

We reformulate an interpolation-based unique decoding algorithm of AG codes, using the theory of Gr$\ddot{o}$bner bases of modules on the coordinate ring of the base curve. The conceptual description of the reformulated algorithm lets us better understand the majority voting procedure, which is central in the interpolation-based unique decoding. Moreover the smaller Gr$\ddot{o}$bner bases imply smaller space and time complexity of the algorithm.

• Journal of the Korean Mathematical Society
• /
• v.55 no.3
• /
• pp.705-717
• /
• 2018

We construct some infinite series of free and nearly free curves using pencils of conics with a base locus of cardinality at most two. These curves have an interesting topology, e.g. a high degree Alexander polynomial that can be explicitly determined, a Milnor fiber homotopy equivalent to a bouquet of circles, or an irreducible translated component in the characteristic variety of their complement. Monodromy eigenspaces in the first cohomology group of the corresponding Milnor fibers are also described in terms of explicit differential forms.

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.264-266
• /
• 2000

In this study, analysis of creep-fatigue behavior of low alloy steel weld was performed. An interface was employed along the crack plane to simulate the interface between base metal and weld metal. A trapezoidal waveshapes was loaded cyclically and analysis result was compared with that of monotonic load. The material was assumed as elastic-plastic-secondary creeping material. Because the isotropic hardening plasticity model used in the last study cannot simulate the behavior of material under cyclic load, the linear kinematic hardening plasticity model was used. The behavior of strain field and $C_{t}$ parameter was obtained.d.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.79-88
• /
• 2000

The objective of this finite element method study was to analyze the stress distribution induced in a maxillary central incisor Ni-Cr base metal coping ceramic crowns with various margin design. Margin designs of crown in this experiment were knife-edge metal margin on chamfer finishing line of tooth preparation(M1), butt metal margin on shoulder finishing line(M2), reinforced butt metal margin on shoulder finishing line(M3), beveled metal margin on bevelde shoulder finishing line(M4). Two- dimensional finite element models of crown designs were subjected to a simulated biting force of 100N which was forced over porcelain near the lingual incisal edge. Base on plane stress analysis, the maxium von Miss stresses(Mpa) in porcelain venner was 0.432, in metal coping was 0.579, in dentin abutment was 0.324 for M1 model, and M2 model revealed in porcelain was 0.556, in metal coping was 0.511, in dentin was 0.339, and M3 model revealed in porcelain was 0.556, in metal coping was 0.794, in dentin was 0.383 for M4 model. All values of each material in metal-ceramic crown were much below the critical failure values.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.77-83
• /
• 2004

Based on a Phased array technology, 2-dimensionally steerable base station antenna was developed at cellular band. The antenna, which consists of 2 by 5 radiating element, can provide 14㏈i gain with half power beam width of 0$^{\circ}$and 13$^{\circ}$ in horizontal and vertical plane respectively. It has beam scanning range of 0$^{\circ}$to 12$^{\circ}$in vertical down tilting and -15$^{\circ}$to 15$^{\circ}$in horizontal steering. The beam control Performance of antenna was verified by DM measurement on field trial.

• Journal of Yeungnam Medical Science
• /
• v.38 no.1
• /
• pp.47-52
• /
• 2021

Background: Short stature is defined as a height below the 3rd percentile or more than two standard deviations below the mean for a given age, sex, and population. There have been inconsistent results regarding craniofacial morphology in short-statured children. This study aimed to analyze the differences between short-statured children with growth hormone deficiency, idiopathic short-statured children, and normal children. Methods: Thirty-one short-statured children with growth hormone deficiency, 32 idiopathic short-statured children, and 32 healthy children were enrolled in this study. The measurements of their craniofacial structures from lateral cephalograms were evaluated. Results: There were statistically significant differences among the three groups seven variables (anterior cranial base length, posterior cranial base length, total cranial base length, upper posterior facial height, posterior total facial height, mandibular ramus length, and overall mandibular length) in the linear measurement and five variables (saddle angle, gonial angle, mandibular plane angle, position of mandible, and maxilla versus mandible) in the angular measurement. Conclusion: Compared to the control group, many linear and angular measurements of the craniofacial structures were significantly different in the two short-statured groups (p <0.05). Treatment plans by orthodontists should include these craniofacial structure characteristics.

• School Mathematics
• /
• v.15 no.4
• /
• pp.847-866
• /
• 2013

The purpose of this study was to analyze students' various solution methods revealed in the lessons of finding out the area of plane figures, and to explore instructional implications on how to draw meaningful formalization out of such multiple methods. The teacher in this study tended to select a few solution methods that were easy for students to understand and to induce formalization. An analysis of students' solution methods and the process of formalization showed that students need to understand what parts of the length of the given plane figure they should know, and to identify the base, height, and diagonal line of the figure. The analysis also showed that it was effective to choose the solution methods that were used by many students and that could be easily transformed into a concise formula. Based on these results, this paper provides instructional suggestions for a teacher to orchestrate classroom discussion toward formalization based on students' multiple solution methods.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.75.1-75.1
• /
• 2012

We have observed the part of the second quadrant of the Galactic Plane in $^{13}CO(1-0)$ using the multibeam receiver system installed on the 14 m telescope at Taeduk Radio Astronomy Observatory. The target region (L=108 to 112.5) is the part of the $^{12}CO$ Outer Galactic Plane Survey (Heyer et al. 1998), and it is for the exact Galactic plane with the latitude range of +1 and -1 degree. Total of 48,000 spectra (about 9 square degees) were obtained on 50" grid. The selected velocity resolution is 0.63 km/sec and sensitivity per channel is 0.17 K, and the covered velocity is 320 km/sec. We developed a new reduction method, which effectively deals with a relatively noisy 3-dimensional database. The collected $^{13}CO$ database will be manipulated with pre-existing $^{12}CO$ data to get several physical parameters. As it is located in the second quadrant, the kinematic distances of the individual clouds, which will be identified, can be estimated relatively easily without any distance ambiguity. In this meeting we present the reduction method, statistics, and some channel maps, integrated intensity maps, and spatial-velocity maps. We intend to clarify any difference of their characteristics between the clouds in the Outer Galaxy and Inner Galaxy using our data base.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.937-946
• /
• 1986

In this paper, the plane stress fracture toughness of low carbon steel with 3mm thickness is investigated for various specimen widths and crack ratios using the J integral. The experiments is carried out for the compact tension(CT) specimen on an Instron machine. For materials that may be approximated by the Ramberg and Osgood stress strain law, the relevant crack parameter like the J integral and load line displacement are approximately normalized. Crack driving forces in terms of J integral is computed using the above estimation scheme. Abtained results are summarized as follows. (1) The plane stress fracture toughness, J$_{c}$, is almost constant in the range 50-70mm of width. Hence J$_{c}$ can be obtained by using smaller specimen than ASTM standard. (2) Yoon's and Simpson's formular which considers crack growth in obtaining J integral show more consevative J than Rice's and Merkle's (3) J$_{c}$ is almost constant in the range 0.499-0.701 crack ratios tested. J$_{c}$ obtained by using Kumar's formular is 28.14kgf/mm for base metal specimen and 32.51kgf/mm for annealed. (4) Comparison of the prediction with actual experimental measurements by Yoon's formular show good agreement for several different-size specimens.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.4
• /
• pp.183-190
• /
• 2010

There are many methods to reduce the weight and the cost of the automobile body, among them, Tailor Welded Blank (TWB) is new welding method applied to body structure. It is necessary to evaluate mechanical properties of TWB structures or sheets for the application to automobile body parts. In this study, the stiffness of T-type and L-type joint structures, composite of TWB panel, which simplified two portions of side structure in automobile body were investigated. Additionally, the fatigue properties of TWB panels were obtained. Two types of welding technologies, laser and mash seam welding, were used to join mild panels with different thickness. This results are compared with conventional structures. The results are as follows: 1) The stiffness of joint structures, composite of TWB panel, is approximately 17% higher than that of conventional ones. 2) The location of welding line in TWB had a effect on the in plane bending stiffness, but not on the out of plane bending stiffness. 3) In terms of welding technology type, the mash seam welding show higher stiffness than the laser welding for in plane bending stiffness. But minimal differences in both types are revealed for out of plane bending stiffness. 4) The fatigue strength, composite of TWB panel, is lower than that of base steel. It is thought that defects in the welding zone had the action of notch in the fatigue test.