• 한국항공우주학회지
• /
• 제48권3호
• /
• pp.187-194
• /
• 2020

본 연구에서는 고도에 따른 간섭 유동과 공력특성을 파악하고, 측추력 제트에 사용된 기체의 종류에 따라 다화학종 가스제트의 확산을 고려한 유동해석을 수행하였다. 공기제트에 비해서 임의로 가정한 다화학종 가스 제트를 사용하는 경우 충격파의 위치와 제트의 확산 영역이 동체전방으로 이동한다. 이로 인해 표면의 고압영역이 앞으로 나가며 같은 조건에서 보다 높은 피칭 모멘트를 갖는다. 또한 고온효과의 적용에 따라 압력분포 예측에 차이를 보였다. 그리고 저고도의 측추력제트 유동 구조와 비교했을 때 중고도 유동조건에서 주변 대기의 낮은 밀도로 측추력 제트의 두께가 더 크며, 넓은 영역에 걸쳐 확산된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권1호
• /
• pp.62-72
• /
• 2016

This study investigated the dynamics associated with prolonged ensiling and aerobic deterioration of whole crop corn (WCC) silages and total mixed ration (TMR) silages containing WCC (C-TMR silages) to clarify the differences that account for the enhanced aerobic stability of TMR silages. Laboratory-scale barrel silos were randomly opened after 7, 14, 28, and 56 d of ensiling and were subjected to analyses of fermentation quality, microbial and temperature dynamics during aerobic exposure. WCC and C-TMR silages were both well preserved and microorganisms were inhibited with prolonged ensiling, including lactic acid bacteria. Yeast were inhibited to below the detection limit of 500 cfu/g fresh matter within 28 d of ensiling. Aerobic stability of both silages was enhanced with prolonged ensiling, whereas C-TMR silages were more aerobically stable than WCC silages for the same ensiling period. Besides the high moisture content, the weak aerobic stability of WCC silage is likely attributable to the higher lactic acid content and yeast count, which result from the high water-soluble carbohydrates content in WCC. After silo opening, yeast were the first to propagate and the increase in yeast levels is greater than that of other microorganisms in silages before deterioration. Besides, increased levels of aerobic bacteria were also detected before heating of WCC silages. The temperature dynamics also indicated that yeast are closely associated with the onset of the aerobic deterioration of C-TMR silage, whereas for WCC silages, besides yeast, aerobic bacteria also function in the aerobic deterioration. Therefore, the inclusion of WCC might contribute to the survival of yeast during ensiling but not influence the role of yeast in deterioration of C-TMR silages.

• 한국식품과학회지
• /
• 제20권3호
• /
• pp.303-309
• /
• 1988

Extruder 조작조건에 따른 extruder 내부물질의 온도변화는 제품의 물리화학적인 특성에 큰 영향을 미치는 요소이다. 자가발열형 single screw extruder를 사용하여 원료의 종류, 입자크기 수분함량과 같은 사입원료 조건과 사출구의 형태, breaker의 형태등과 같은 extruder의 구조적인 요소 및 냉각방법과 스크류 회전속도와 같은 작동조건을 달리했을 때의 작동초기 단계에서 열발생 속도와 평형상태에서 내부온도 분포를 관찰하였다. 쌀가루, 보리가루, 밀가루, 탈지대두분을 원료로 하여 각각 압출성형했을 때 바렐내부 발열상태를 보면 탈지대두분이 가장 급격한 온도증가를 나타내었으며 쌀가루가 가장 낮게 나타났다. 수분함량이 감소함에 따라 각 부위 온도 및 동력요구량은 증가했고, 입자크기가 작을 수록 표면적이 증가하여 압축부위 온도가 높았다. 스크류 회전속도가 증가함에 따라 각 부위의 온도가 높아졌다. 또한 바렐내부 온도분포가 계량부위>사출구부위>압축 부위 순서로 이루어질 때 extruder 작동상태가 가장 양호하였다.

• 한국가정과학회지
• /
• 제5권1호
• /
• pp.62-70
• /
• 2002

The objective of this study was to evaluate the effects of processing parameters of co-rotating twin screw extruder and dry methods on the level of resistant starch (RS) and the properties of extrudate prepared from normal maize starch. The processing parameters were used 90, 110, 130$^{\circ}C$ in temperature, 25.0~30.0% in moisture content, 150, 200, 250 rpm in screw speed and hot and cool air drying and drying after refrigerating in drying methods. The barrel temperature and drying methods had affected the level of resistant starch of extrudate. RS levels of extrudates were ranged from 2.4 to 15.5% by AOAC method. The extrudates, extruded at 110$^{\circ}C$ and then stored at 4$^{\circ}C$, showed the highest level of RS level (15.5%). Water absorption index increased with increasing moisture content and peak temperatures and viscosities of extudates decreased compare to that of raw starch from 94$^{\circ}C$ to 50~65$^{\circ}C$ and from 220 to 46~98 RVU, respectively. Extudates treated in 90$^{\circ}C$ and 110$^{\circ}C$ showed strong peak at $2{\theta}=6.7{\sim}17.0^{\circ}$ by X-ray diffractometry and had ~150$^{\circ}C$ endotherm like as that of RS3 starch by differential scanning calorimetry. In case of 130$^{\circ}C$, extrudates showed strong peak at $2{\theta}=20.0^{\circ}$ and had 106$^{\circ}C$ endotherm.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권5호
• /
• pp.783-787
• /
• 1999

To study the effects of different extrusion conditions of barley on growth performance, nutrient digestibility and nutrient excretion in feces, a total of 150 growing pigs ($Landrace{\times}Duroc{\times}Large$ White; average 24.4 kg body weight) were allotted to five treatments, in a completely randomized block design. The experimental diets were based on corn-soybean and 30% of barley was included in each diet; barley was the only extruded ingredient. The treatments were 1) no extrusion (Control); 2) extrusion at $100^{\circ}C$ without preconditioning (ENLT); 3) extrusion at $150^{\circ}C$ without preconditioning (ENHT); 4) extrusion at $100^{\circ}C$ with preconditioning (ECLT); 5) extrusion at $150^{\circ}C$ with preconditioning (ECHT). Temperature in the barrel was controlled within ${\pm}5^{\circ}C$ by feed rate with the addition of water at the rate of $3{\ell}\;per\;min$. in the extruder for each treatment. For the 6 week experimental period, extrusion of barley improved the average daily gain (ADG) and digestibilities of dry matter, crude protein and gross energy in growing pigs. As compared to control, significant improvements in ADG (p<0.05) were shown in the groups of feeding extruded barley at high temperature (ENHT and ECHT). There were also significant differences in the digestibilities of DM, CP and P between extrusion temperatures. Barley extruded at high temperature gave better digestibilities of DM, CP and GE than barley extruded at low temperature. Extruded barley diet groups showed significantly (p<0.05) lower excretions of DM, nitrogen (N) and P per kg gain as compared to the ground barley group. DM, N and P excretion per kg gain were also significantly lower in pigs fed barley extruded at $150^{\circ}C$ than at $100^{\circ}C$. In conclusion, extrusion considerably improved the nutritive value of barley and it appeared that temperature is the most important variable.

• Journal of Ginseng Research
• /
• 제29권2호
• /
• pp.107-112
• /
• 2005

본 실험은 수분함량 $15\%$로 건조한 수삼을 사출구온도($100^{\circ}C$와 $120^{\circ}C$), 스크루 회전속도(200과 300 rpm)에서 압출성형처리하여 조사포닌,진세노사이드, 말톨, 환원당, 색도와 같은 홍삼성분의 변화를 분석하였다. 압출성형공정을 통해 조사포닌 함량이 증가하는 것으로 보아사포닌의 압출성형공정동안 생성되는 것을 알 수가 있었다. 홍삼에 존재하는 진세노사이드 $Rg_l$과 $Rg_2$는 사출구온도를 $100^{\circ}C$에서 $120^{\circ}C$로 증가함에 따라 0.227 mg/g에서 0.2835 mg/g$(Rg_l)$, 0.1164 mg/g에서 0.2230 mg/g$(Rg_2)$증가하였고, 스크루 회전속도를 300rpm에서 200rpm으로 감소시켰을 때 진세노사이드 $Rg_1$ 과 $Rg_2$는 증가하는 경향을 나타내었다. 또한 수삼이나 백삼에는 함유되지 않고 홍삼에만 함유된 특이성분으로 알려진 말톨을 압출성형 수삼에서 확인할 수가 있었다. 사출구의 온도가 $100^{\circ}C$에서 $120^{\circ}C$로 증가함에 따라 총당의 함량은 크게 변화가 없었지만 환원당은 온도가 증가할수록 감소하는 경향을 보였다. 결론적으로 사출구온도와 스크루 회전속도 이외의 압출성형 공정변수의 조절을 통해 압출성형공정을 홍삼제조 공정에 적용할 수 있는 가능성을 알 수가 있었다.

• 한국식품과학회지
• /
• 제27권3호
• /
• pp.404-413
• /
• 1995

밀기울의 물리화학적 변형을 유도하기 위하여 3가지 형태의 스크류 조합을 달리한 이축 압출성형 가공시 수반되는 시스템 변수(압출온도, 압출압력, 기계적에너지 소모율, 평균 체류시간)의 변화를 분석하였다. 스크류는 reverse screw element(RSE)를 바렐의 중앙부에 3, 4 및 5개를 조합한 형태를 사용하여 스크류의 회전속도 $280{\sim}380\;rpm$, 원료의 공급속도 $22{\sim}38\;kg/hr$, 원료의 수분함량 $17{\sim}33%$ 범위에서 압출성형을 실시하였다. 압출온도는 RSE의 갯수가 증가할수록 상승하였고, 원료의 공급량과 수분함량이 증가할수록 감소하였다. 압출압력은 원료의 충진율이 감소하면 낮아졌으며, RSE가 많을수록 압출온도가 상승함으로서 용융물질의 점도가 떨어져 압력이 감소하였다. 또 원료의 공급량이 증가하고 원료의 수분함량이 낮을수록 압출압력이 감소하였다. 기계적에너지 소모율(specific mechanical energy; SME)은 원료의 공급량과 수분함량이 증가할수록 감소하였으며, RSE의 갯수를 3개에서 5개로 조합하여 사용함에 따라서 SME가 증가하였다. 평균체류시간(RT)은 RSE를 4개 조합한 경우가 가장 길었고, die hole의 크기가 작을수록 RT도 증가하였다. 원료의 공급량이 증가함에 따라서 RT는 감소하였으며, 원료의 수분함량이 증가될수록 RSE가 3개인 경우에는 RT가 증가하였고 4개 및 5개인 경우는 감소하였다.

• Journal of Microbiology and Biotechnology
• /
• 제27권4호
• /
• pp.775-784
• /
• 2017

A neutral xylanase (CcXyn) was identified from Coprinus cinereus. It has a single GH10 catalytic domain with a basic amino acid-rich extension (PVRRK) at the C-terminus. In this study, the wild-type (CcXyn) and C-terminus-truncated xylanase ($CcXyn-{\Delta}5C$) were heterologously expressed in Pichia pastoris and their characteristics were comparatively analyzed with aims to examine the effect of this extension on the enzyme function. The circular dichorism analysis indicated that both enzymes in general had a similar structure, but $CcXyn-{\Delta}5C$ contained less ${\alpha}-helices$ (42.9%) and more random coil contents (35.5%) than CcXyn (47.0% and 32.8%, respectively). Both enzymes had the same pH (7.0) and temperature ($45^{\circ}C$) optima, and similar substrate specificity on different xylans. They all hydrolyzed beechwood xylan primarily to xylobiose and xylotriose. The amounts of xylobiose and xylotriose accounted for 91.5% and 92.2% (w/w) of total xylooligosaccharides (XOS) generated from beechwood by CcXyn and $CcXyn-{\Delta}5C$, respectively. However, truncation of the C-terminal 5-amino-acids extension significantly improved the thermostability, SDS resistance, and pH stability at pH 6.0-9.0. Furthermore, $CcXyn-{\Delta}5C$ exhibited a much lower $K_m$ value than CcXyn (0.27 mg/ml vs 0.83 mg/ml), and therefore, the catalytic efficiency of $CcXyn-{\Delta}5C$ was 2.4-times higher than that of CcXyn. These properties make $CcXyn-{\Delta}5C$ a good model for the structure-function study of $({\alpha}/{\beta})_8$-barrel-folded enzymes and a promising candidate for various applications, especially in the detergent industry and XOS production.

• 한국식품영양학회지
• /
• 제25권4호
• /
• pp.850-854
• /
• 2012

This study is carried out in order to develop food materials for the promotion of rice consumption. In this study, we researched the physicochemical properties of extruded rice flour (ER) and gelatinization popped rice flour (GPR) by the extrusion process and by the popped method with milled rice and brown rice. The extrusion process used a couple of screw extruders. The extrusion parameter was kept constant at a feed moisture content of 25%, barrel temperature of $120^{\circ}C$ and screw speed of 400 rpm. GPR was prepared by batch popping machine after gelatinization of rice. In order to evaluate the physicochemical properties of ER and GPR, as well as the gelatinization rate, water soluble index (WSI), water adsorption index (WAI), DPPH radical scavenging activity and total dietary fiber content, the color value was carried out. The gelatinization rate was similar to 71.1~73.8%. Further, the results of WSI and WAI were increased at ER and GPR compared to the raw materials; ER was also higher than GPR. DPPH radical scavenging activity and total dietary fiber content showed a tendency to reduce after extrution and popping. As a result of the color value, the L value of ER decreased more than the raw materials, whereas GPR increased at a and b values.

• 한국식품과학회지
• /
• 제29권1호
• /
• pp.72-76
• /
• 1997

압출성형기의 모터에너지는 자가발열 열에너지와 기계에너지로 전환되며 히터에너지는 열에너지로 공급되는데 각 에너지가 녹말의 호화에 미치는 영향을 분석하였다. 저온$({\leq}80^{\circ}C)$ 압출성형조건에서 자가발열 에너지는 낮은 수분함량의 분체 마찰에 의한 것과 높은 수분함량의 점성에 의한 것으로 구분할 수 있었으며 분체 마찰에 의한 열에너지가 호화에 더 효과적임을 알 수 있었다. 또한 모터에너지에서 자가발열되고 남은 순수한 기계에너지의 효과를 상대기계에너지로 평가한 결과, 높은 수분함량$({\geq}33%)$ 조건의 호화는 상대기계에너지의 변화에 크게 의존하며 낮은 수분함량$({\leq}30%)$의 경우는 거의 영향을 받지 않는 것으로 나타났다.