• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.371-374
• /
• 2003

The corrosion of steel reinforcing bar(re-bar) has been the major cause of the reinforced concrete deterioration. FRP(Fiber-reinforced polymer) reinforcing bar has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. In this study, long-term durability performance of FRP re-bar were evaluated. The mechanical and durability properties of two type of CFRP- and GFRP re-bar were investigated; the FRP re-bars were subjected to alkaline solution, acid solution, salt solution and deionized water. The mechanical and durability properties were investigated by performing tensile and short beam tests. Experimental results confirmed the desirable resistance of FRP re-bar to aggressive chemical environment.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.926-931
• /
• 2012

Rotary bar was cutting tool being in use for deburring scale after welding metal and for eliminating sharp edges. It was necessary to develop exclusive 6-axis machine being possible to process machining continuously for making an cutting edge of rotary bar and to revise easily machining program. This study aimed at the structural analysis of strength according to the configuration of new made 6-axis machine and at the machining accuracy and durability of rotary bar. As a result of test, the runout of new rotary bar manufactured out of 6-axis machine was decreased from 0.385 mm to 0.027mm extensively than old one. And good cutting ability and durability was obtained equal quality compared with imported products.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1027-1030
• /
• 1999

Recently many efforts on the development of automatic processing system for delivery sequence sorting have been performed in ETRI, which requires the use of postal 4 state bar code system to encode delivery points. This paper addresses the issue on the reduction of reading error in postal 4 state raster beam based bar code reader by adjusting measured values of bar code width to its average value over each interval. The test results show that the above method reduces the average reading error rate approximately by 90-100%.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.24-33
• /
• 1996

Up to now, most of studies on mechanical properties in friction welded components are about tensile and bending strength. However the fatigue studies on the friction-welded components subjected to repeated stress are not available. The purposes of this study are the development of fundamental design and the development of in-process real-time weld quality evaluation technique by acoustic emission for the bar-to-bar dissimilar friction welding of hydraulic valve spool steels.

• 한국식품과학회지
• /
• 제52권1호
• /
• pp.40-45
• /
• 2020

1996년 이후부터 현재까지 개발된 GM 작물은 520여종에 이르며, 미국, 브라질, 아르헨티나, 캐나다, 인도 등을 포함해 26개국에서 GM 작물을 재배하고 있다. 특히, 제1세대 GM 작물로 구분되는 제초제 내성 GM 작물은 전체 GM 작물의 67%를 차지하며, 그 중 제초제 glufosinate에 내성을 나타내는 pat 또는 bar 유전자를 지닌 작물은 44%를 차지한다. 하지만 GM 작물이 같은 형질을 지녔더라도 유전자의 기원, 식물의 종 및 개발자에 따라 그 유전자의 서열은 매우 가변적이기 때문에 이를 식별하기란 쉽지 않다. 따라서 본 연구에서는 전체 GM 작물의 44%, 국내 승인 GM 작물의 약 53%를 차지하는 제초제 glufosinate 내성 유전자에 특이적이면서도 보편적인 마커를 개발하고자, 여러 GM 작물의 pat 또는 bar 유전자의 DNA 염기서열을 비교하여 PCR 프라이머를 개발하였으며, 이를 GM 작물 표준물질을 사용하여 검증하였다. 정성 및 정량적 PCR 실험을 통해 pat 유전자에 특이적인 PCR 프라이머를 개발하였다. 또한 pat과 bar 유전자를 동시에 검출 할 수 있는 PCR 프라이머도 개발하였으며, 정량적 PCR 분석을 통해 0.1% 함량의 수준까지도 검출 가능함을 확인하였다. 따라서 본 연구의 수행 결과로 확인된 PCR 마커 및 분석법이 향후 GM 작물의 안전한 유통관리 및 GM 식품의 식품 안전관리를 위한 저비용 고효율적 검출방법으로 이용될 수 있을 것이라 생각된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.621-626
• /
• 1998

An experimental investigation on the reinforcing bar corrosion and relationshid of reinforcing bar and concrete bond strength has been conducted to establish the allowable limit of rust in the construction field. The reinforcing bars used in this study were rusted before embedding in concrete. The first component of this experiment is to make rust of reinforcing bar rust artificially based on Faraday's theory at certain rates such as 2, 4, 6, 8 and 10% of reinforcing bar weight. For estimation of the amount of rust by weight, Clarke's solution and Shot blasting were adopted and compared. Parameters include 240 and 450kg/㎠ of compressive strengths and diameter of reinforcing bar (16, 19 and 25mm) corresponding development length for pull-ort test. And, pull-out tests were carried. out according to KSF 2441 and ASTMC 234 to investigate the effect of the corrosion rate on reinforcing bar-concrete bond behavior. It is found from the test results that the test techniques for corrosion of bar used in this study is relatively effective and correct test method. Results shows that up to 2% of rust increases the bond strength regardless of concrete strength and diameter of reinforcing bar like the existing data. It might be because of the roughness from rust. As expected, the bond strength increases as compressive strength of concrete increases and the diameter of bar decreases.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.943-956
• /
• 2017

Purpose: This paper proposes a VSS(Variable Sample Size) ${\bar{X}}$ control chart using surrogate variable and shows its effectiveness compared with FSS(Fixed Sample Size) ${\bar{X}}$ control chart using either performance variable or surrogate variable. Methods: The expected cost function of VSS ${\bar{X}}$ control chart is derived. The optimal designs are then found for numerical examples using a GA(genetic algorithm) and compared to those of the FSS ${\bar{X}}$ control charts. Results: Computational results show that VSS ${\bar{X}}$ control chart using surrogate variables is superior to FSS ${\bar{X}}$ control chart using either performance variable or surrogate variable from the economic view points. Conclusion: The proposed VSS ${\bar{X}}$ control chart will be useful in industry fields where a performance variable is not avaliable or too costly.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.174-183
• /
• 2011

This paper is about a bar code decoding algorithm developed for smart phone applications. The algorithm consists of bar code data extraction procedure, bar code signal estimation procedure, and bar code decoding procedure. To detect the peak bar code module, a DSTW had been applied because of its outstanding performance in ECG peak detection. In order to minimize errors due to non-uniform light effect, the proposed algorithm was acted as a baseline wandering filter based on module peaks detection. The algorithm had been tested to evaluate the performance under the conditions of blurring, non-uniformed light and white noises. The algorithm had shown excellent performance in reconstruction of bar code decoding, compared to other conventional methods. In order to show the possibility of applying the algorithm to a smart phone, a real UPC-A type 150 bar code pictures obtained from a smart phone camera was applied to the algorithm, achieving the correct recognition rate of 97.33%.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.516-521
• /
• 2014

This paper describes the development of a new piezoelectric unimorph cantilever structure intended to improve electrical output power, compared to a conventional cantilever. The proposed structure employs a cylindrical bar attached to one side of a steel plate, which is a significant factor in forced vibration mode. The feasibility of the proposed methodology was assessed experimentally and theoretically. The influence of three different types of bar material (i.e., stainless steel, silicon rubber, and urethane), and bar position, on the output voltage were examined and compared with those without the bar. The optimal position and material for the bar were identified through experimental and theoretical analyses. It appears that the electrical output power of the proposed cantilever is about 40% higher than that of a conventional unimorph cantilever.

• Architectural research
• /
• 제10권1호
• /
• pp.13-23
• /
• 2008

It is the purpose of this study to evaluate the structural performance of steel pipe splice for SD500 high-strength reinforcing bar, through a cyclic loading test. The experimental variables adopted in this study include the development length of rebar, the type of sleeve, and size of reinforcing bar, among others. The results of this study showed that the developed steel pipe splice system for SD500 high-strength reinforcing bar, retained the structural performance required in domestic, ACI and AIJ code. It is considered that the study result presented in this paper can be helpful in developing a reasonable design method for a steel pipe splice system for SD500 high-strength reinforcing bar.