• 제목/요약/키워드: Band rejection

검색결과 245건 처리시간 0.032초

W-Band MMIC chipset in 0.1-㎛ mHEMT technology

  • Lee, Jong-Min;Chang, Woo-Jin;Kang, Dong Min;Min, Byoung-Gue;Yoon, Hyung Sup;Chang, Sung-Jae;Jung, Hyun-Wook;Kim, Wansik;Jung, Jooyong;Kim, Jongpil;Seo, Mihui;Kim, Sosu
    • ETRI Journal
    • /
    • 제42권4호
    • /
    • pp.549-561
    • /
    • 2020
  • We developed a 0.1-㎛ metamorphic high electron mobility transistor and fabricated a W-band monolithic microwave integrated circuit chipset with our in-house technology to verify the performance and usability of the developed technology. The DC characteristics were a drain current density of 747 mA/mm and a maximum transconductance of 1.354 S/mm; the RF characteristics were a cutoff frequency of 210 GHz and a maximum oscillation frequency of 252 GHz. A frequency multiplier was developed to increase the frequency of the input signal. The fabricated multiplier showed high output values (more than 0 dBm) in the 94 GHz-108 GHz band and achieved excellent spurious suppression. A low-noise amplifier (LNA) with a four-stage single-ended architecture using a common-source stage was also developed. This LNA achieved a gain of 20 dB in a band between 83 GHz and 110 GHz and a noise figure lower than 3.8 dB with a frequency of 94 GHz. A W-band image-rejection mixer (IRM) with an external off-chip coupler was also designed. The IRM provided a conversion gain of 13 dB-17 dB for RF frequencies of 80 GHz-110 GHz and image-rejection ratios of 17 dB-19 dB for RF frequencies of 93 GHz-100 GHz.

구형 공진기와 계단 임피던스 개방 스터브를 사용한 고효율 광대역 대역 통과 필터 특성 (Characteristics for High Efficiency and Wideband Band Pass Filter Using Rectangular Resonator and Step-Impedance-Open-Stubs)

  • 이영훈;권원현
    • 한국전자파학회논문지
    • /
    • 제20권2호
    • /
    • pp.200-207
    • /
    • 2009
  • 본 논문에서는 구형 공진기와 SIOS(Step-Impedance-Open-Stub)를 사용하여 삽입 손실이 적고, 차단 특성이 아주 좁고, 광대역 특성을 갖는 대역 통과 필터를 연구하였다. SIOS는 일반 $0.25\;{\lambda}$ 개방 스터브보다 약 30 %의 길이를 줄일 수 있고, 또한, SIOS의 길이에 따라 임피던스 값을 조정함으로써 필터의 특성 개선에 적용할 수 있다. 본 논문의 객관성을 입증하기 위해서 이중 모드 구형 공진기를 사용한 최적화된 광대역 대역 통과 필터를 구현하였다. 전송 선로 모델을 사용하여 계산한 주파수 특성 결과는 실험값과 아주 잘 일치하였다. 본 논문에서 구현된 필터의 주파수 특성은 필터의 3 dB 대역폭은 51.75 %(3.206 GHz)이고, 삽입 손실은 0.44 dB, 30 dB 차단 특성은 저 주파수 대역에서 221 MHz($4.326{\sim}4.587\;GHz$), 고주파수 대역에서 181 MHz($7.739{\sim}7.954\;GHz$)이다. 최대 차단 특성은 저주파 대역에서 -61.8 dB, 고주파 대역에서 -76.3 dB이다.

부품 허용 오차에 둔감한 60Hz 대역 억제 필터 설계 (Design of a 60 Hz Band Rejection FilterInsensitive to Component Tolerances)

  • 천지민
    • 한국정보전자통신기술학회논문지
    • /
    • 제15권2호
    • /
    • pp.109-116
    • /
    • 2022
  • 본 논문에서는 센서 시스템에 유입된 60Hz 라인 주파수 잡음의 영향을 효과적으로 제거하기 위한 상태 변수 필터(state variable filter, SVF) 구조의 대역 억제 필터(band rejection filter, BRF)를 제안한다. 기존 SVF 구조의 BRF는 추가적인 연산 증폭기(operational amplifier, OPAMP)를 사용하여 저역 통과 필터(low pass filter, LPF) 출력과 고역 통과 필터(high pass filter, HPF) 출력 간의 합 또는 입력 신호와 대역 통과 필터(band pass filter, BPF) 출력 간의 차를 구함으로써 구현한다. 따라서 BRF의 신호 감쇄를 결정하는 노치 주파수(notch frequency)와 노치 깊이(notch depth)가 신호의 합 또는 차를 구하는데 사용한 저항의 허용 오차(tolerance)에 크게 의존된다. 반면에 제안 된 BRF는 SVF 구조 내에 BRF 출력이 자연발생적으로 형성되기 때문에 각 포트 간의 조합이 필요 없게 되어 기존 BRF와 달리 노치 주파수와 노치 깊이가 저항의 허용 오차에 영향을 받지 않는다. 제안된 BRF의 노치 주파수는 59.99Hz이며 몬테 카를로 시뮬레이션 결과를 통해 저항의 허용 오차에 전혀 영향을 받지 않는 것을 확인할 수 있었다. 노치 깊이도 평균 -42.54dB, 표준편차 0.63dB를 가져 BRF로서 정상적인 동작이 가능함을 확인하였다. 또한 제안된 BRF를 가지고 60Hz 잡음에 간섭이 된 심전도 신호에 대하여 잡음 필터링을 적용한 결과를 보여주었으며 60Hz 잡음이 적절하게 억제되는 것을 확인할 수 있었다.

평면형 보우타이 모노폴 안테나의 초광대역 설계 (An UWB Design of Plane Bow-Tie Monopole Antenna)

  • 김태우;최경;황희용
    • 한국전자파학회논문지
    • /
    • 제25권12호
    • /
    • pp.1212-1218
    • /
    • 2014
  • 본 논문은 UWB 대역 중 낮은 대역만을 만족하던 기존 보우타이 모노폴 안테나의 접지 패치 변경을 통한 초광대역화 설계를 제안한다. 기존의 안테나는 반원형 접지 패치를 가진데 반해, 제안된 안테나는 오각형 형태의 접지 패치를 가지도록 설계되어 UWB 대역 전체에서 동작이 가능하다. 측정된 안테나의 반사손실 특성은 4.9~5.8 GHz에서 갖는 저지 대역 외의 3.1~10.6 GHz 에서 -10 dB 이하를 만족한다. 측정된 안테나의 방사패턴은 모노폴 안테나의 방사패턴과 유사한 특성을 지니며, 저지 대역 주파수인 5.8 GHz에서 안테나 이득은 동작 주파수 대비 약 8 dB 감소되었다.

체비셰프 응답을 갖는 이중모드 공동 공진기 필터의 설계 및 제작 (Design and implementation of dual-mode cavity filter with achebyshev response)

  • 김상철;홍의석
    • 한국통신학회논문지
    • /
    • 제21권2호
    • /
    • pp.505-513
    • /
    • 1996
  • 본 논문에서는 Chebyshev 응답을 갖는 이중모드 대역통과 필터를 Ku-band와 K-band에서 설계.제작하였다. 제작된 필터는 2개의 독립 직교 $TE_{113}$ 원형 공진 모드로 공진한다. 2개의 이중모드 필터는 4-pole Chebyshev함수 특성을 가지며, 각각 중심 주파수 12.5GHz, 대역폭 100MHz와 중심 주파수 19.25GHz, 대역폭 120MHz를 갖는다. 측정 실험 결과 12.5GHz 이중모드 필터는 통과 대역내에서 1.2dB의 삽입 손실과 65dB의 저지 대역 감쇠를 나타냈고 19.25GHz 필터는 1.55dB의 삽입손실과 70dB의 저지 대역 감쇠를 나타냈다. 이러한 실험 결과는 설계 사양과 잘 일치함을 알 수 있었다.

  • PDF

저궤도 위성용 S-BAND 수신기 설계 및 제작 (Design and Fabrication of a S-BAND Receiver for Low Orbit Satellite)

  • 최영진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.35-38
    • /
    • 2005
  • In this study, S-Band receiver for low orbit satellite is implemented. The developed receiver is double super-heterodyne type and STDN compatible. Input/output frequency of receiver is 2034.747MHz and 18.414MHz used for KOMPSAT 2 satellite. Overall gain(@AGC=0V) and image rejection were 92.4dB and 50.2dB respectively. It was verified that receiver has stable performance to the temperature limit, power supply voltage variation and input signal level range.

  • PDF

보우-타이 모노폴 UWB 안테나의 소형화 및 대역 저지 특성 (A Miniaturized and Band Rejection Characteristic of Bow-Tie Monopole UWB Antenna)

  • 최형석;최경;황희용
    • 한국전자파학회논문지
    • /
    • 제23권3호
    • /
    • pp.300-305
    • /
    • 2012
  • 본 논문에서는 대역 저지 특성을 갖는 소형화된 보우-타이 모노폴 UWB 안테나를 제안하였다. 기존의 보우-타이 모노폴 안테나에 완전 자계벽(PMW) 조건을 적용하여 안테나의 물리적 크기를 소형화하였다. 임피던스 정합을 위해 접지면의 굴곡각을 조절하였고, 테이퍼 형태의 급전 선로를 적용하였으며, 패치면의 모서리를 잘라 내었다. UWB 대역 내에 존재하는 타 대역의 간섭을 저지하기 위해 패치면에 ${\lambda}/4$ 슬롯 공진기를 삽입하였다. 제작된 안테나는 비유전율 6.15를 갖는 Taconic RF60-A 기판을 사용하였다. 제안된 안테나의 크기는 $30.0{\times}39.7mm^2$로 기존 보우-타이 모노폴 안테나의 약 45 %가 줄어들었다. UWB 전체 대역에서 -10 dB 이하의 반사 손실 특성과 5 GHz WLAN 대역의 저지 특성을 나타내었다. -1~5 dBi의 최대 이득 및 1.0 ns 이내의 군지연 변화 특성과 x-y평면의 방사 패턴에서 지향성을 나타냈다.

광대역 저지특성을 갖는 반파장 저역통과 여파기 설계 (Design of Half-Wavelength Low-PASS Filter with Wideband Rejection Characteristic)

  • 김영태;김영주;박준석;김형석;임재봉;조홍구
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.293-295
    • /
    • 2003
  • In this paper, planar harmonic rejection low-pass filter is proposed to effectively suppress spurious response in stop-band. For suppress the unwanted signal such as spurious and harmonics, we presented a new design method controlled the higher order modes. The proposed low-pass filter was shown to suppress the spurious response by more than $20{\sim}40dB$ compared with conventional microstrip low-pass filters. The filter is evaluated by experiment and simulation with good agreement and shown to have attractive properties such as wide stop band range and low insertion loss.

  • PDF

MC-CDMA 환경에서 임펄스 간섭에 강한 협대역 간섭제거 알고리즘 (Narrow Band Interference Canceller Algorithm robust to Impulsive Interference in MC-CDMA System)

  • 이영용;최성규;최형진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.5-8
    • /
    • 1999
  • In this paper, we present narrowband interference (NBI) cancelling algorithm applied to wideband spread spectrum system. We introduce multi-carrier transmission technique to overcome hardware inplementation difficulty of wideband spreading above 40MHz and to enhance NBI performance. A direct-sequence spread spectrum receiver using both decision-feedback and two sided LMS filters for combating narrowband interference is applied. We show that performance of this receiver outperforms conventional NBI rejection systems in tone jamming, partial band jamming, and impulsive channel through the bit error ratio evaluation. In addition, we propose a new technique to improve the performance of time domain NBI rejection algorithm sensitive to impulsive channel.

  • PDF

Shorted metallic patch 를 이용하여 두 포트 사이의 고립도를 향상 시킨 이중대역 이중편파 안테나 (A dual-frequency and dual-polarization antenna with enhanced isolation between two ports using shorted metallic patches)

  • 이동현;김재희;장종훈;임윤택;박위상
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.67-68
    • /
    • 2006
  • A suspended microstrip line structure over mushroom-like SMPs is designed and is applied to a dual-frequency and dual-polarization microstrip patch antenna. This structure has a distinctive and sharp rejection band and provides near 0 dB insertion loss outside the rejection band. Applying the structure to the conventional DFDP antenna enhanced the isolation between the two ports more than 20 dB. The structure is expected to have a wide range of applications in antennas and filters due to its compactness and integrability in circuits.

  • PDF