• 제목/요약/키워드: Band Frequency Energy

검색결과 311건 처리시간 0.03초

캔틸레버형 모듈을 이용한 광대역 압전 하베스터 개발 및 평가 (Development and Evaluation of Broadband Piezoelectric Harvesters using a Cantilever-Type Module)

  • 박범근;백종후
    • 센서학회지
    • /
    • 제29권4호
    • /
    • pp.261-265
    • /
    • 2020
  • In cantilever type piezoelectric energy harvester, the amount of power generation decreases rapidly when outside a certain frequency. The thickness and weight of the cantilever metal plate were modified to develop cantilevers that could produce high power over a wide frequency range. The thicker the cantilever, the higher the power in the higher frequency range. As the weight of the mass increased, the cantilever tended to generate higher power, and the frequency band decreased. A 0.6 mm metal plate cantilever that had a mass of 3.3 g generated power that exceeded 3 mW within the 91-102 Hz range, with average and output values of 9.484 mW and 20.748 mW, respectively, at 99 Hz.

SBR을 이용한 주파수 밴드선택 여기 선형예측 광대역 음성/오디오 부호화 (Frequency Band Selection Exited Linear Prediction Wideband Speech/Audio Coding Using SBR)

  • 장성훈;이인성
    • 한국음향학회지
    • /
    • 제32권6호
    • /
    • pp.556-562
    • /
    • 2013
  • 본 논문은 컴포트 노이즈(comfort noise)를 이용하는 주파수 밴드선택 음성/오디오 코덱에서 컴포트 노이즈 대신 SBR(Spectral Band Replication) 기술을 이용하여 여기 신호를 대체 함으로서 밴드 선택 광대역 음성/오디오 부호화기의 성능 향상을 목표로 한다. 비 전송 밴드에 SBR 기술로 합성된 신호를 삽입하기 위하여 부밴드 별로 전송된 신호를 활용하며, 각각의 부밴드 별로 에너지 가중치를 설정한다. 백색잡음 성분의 컴포트 노이즈 대신 전송신호에 의존하는 신호를 합성 함으로서 보다 높은 음질의 밴드 선택 부호화기를 제안하였다.

MNOS 기억소자의 계면상태밀도의 에너지 분포의 결정 (Determination of Energy Distribution of Interface State Density in the MNOS Memory Device)

  • 한태현;강창수;박종하;서광열
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1988년도 추계학술대회 논문집
    • /
    • pp.1-4
    • /
    • 1988
  • The high frequency and quasi-state C-V curves were measured to determine the interface state density in MNOS devices. Berglund method was appropriate for determination of energy distribution of interface state density all over the energy gap. Applying Vg vs Øs relation by Berlund method to comparison-analysis method of the high-frequency and quasi-static C-V curves, we were able to determine the energy distribution by only measured C-V curves without theoretical C-V curves. The interface state density near the conduction band was high at lower temperature than room temperature.

  • PDF

Heaving displacement amplification characteristics of a power buoy in shoaling water with insufficient draft

  • Kweon, Hyuck-Min;Cho, Il-Hyoung;Cho, Hong-Yeon
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제5권4호
    • /
    • pp.614-624
    • /
    • 2013
  • The resonance power buoy is a convincing tool that can increase the extraction efficiency of wave energy. The buoy needs a corresponding draft, to move in resonance with waves within the peak frequency band where wave energy is concentrated. However, it must still be clarified if the buoy acts as an effective displacement amplifier, when there is insufficient water depth. In this study, the vertical displacement of a circular cylinder-type buoy was calculated, with the spectrum data observed in a real shallow sea as the external wave force, and with the corresponding draft, according to the mode frequency of normal waves. Such numerical investigation result, without considering Power Take-Off (PTO) damping, confirmed that the area of the heave responses spectrum can be amplified by up to about tenfold, compared with the wave energy spectrum, if the draft corresponds to the peak frequency, even with insufficient water depth. Moreover, the amplification factor of the buoy varied, according to the seasonal changes in the wave spectra.

잡음 전력의 불확실성이 에너지 검파 기반의 스펙트럼 감지에 미치는 영향 (Effects of Noise Power Uncertainty on Energy Detection for Spectrum Sensing)

  • 임창헌
    • 대한전자공학회논문지TC
    • /
    • 제48권11호
    • /
    • pp.22-27
    • /
    • 2011
  • 스펙트럼 감지를 하기 위해 에너지 검파기는 수신 신호의 에너지를 미리 정해둔 임계값과 비교하여 1차 사용자가 면허 대역 내에서 활동을 하는 지 여부를 판단한다. 여기에서 임계값은 해당 주파수 대역에 존재하는 잡음의 전력 수준과 관련이 있다. 에너지 검파에 대한 과거의 연구 대부분은 잡음 전력을 미리 정확하게 알고 있다는 가정에 기초한 것이었다. 그러나 실제 환경에서는 잡음 전력에 대한 불확실성이 존재하기 때문에 이 가정은 현실적으로 유효하지 않다. 그러므로 잡음 전력의 불확실성이 에너지 검파기의 스펙트럼 감지 성능에 미치는 영향을 파악할 필요가 있다. 이에 이 논문에서는 유수 정리(residue theorem)에 기반을 둔 적분을 활용하여 그 영향을 수학적으로 분석하고 그 결과를 제시하고자 한다.

IEEE 802.22 인지 라디오 네트워크에서 채널 센싱 오버헤드 분석 (An Analysis on Channel Sensing Overhead in IEEE 802.22 Cognitive Radio Networks)

  • 박근모;김종권
    • 한국정보과학회논문지:정보통신
    • /
    • 제37권3호
    • /
    • pp.249-253
    • /
    • 2010
  • 폭발적인 트래픽 양의 증가와 함께 ISM 대역과 같이 라이선스가 필요 없는 주파수 대역의 포화상태로 인하여 무선네트워크의 주파수 자원이 점점 부족해지고 있다. 그러나 반대로 라이선스 주파수 대역의 이용률은 극히 저조한 상태라는 것이 여러 실험결과를 통해 알려졌다. 이러한 라이선스 주파수의 비효율적인 측면을 완화하기 위해 최근 인지라디오 기술이 제안되고 있다. 인지라디오는 비록 라이선스가 없는 사용자라도 라이선스 사용자를 방해하지 않는 한에서 라이선스 주파수 대역을 사용할 수 있도록 하는 기술로써 라이선스 주파수 대역을 좀 더 효율적으로 사용할 수 있게 하는 기술이다. IEEE 802.22는 인지 라디오를 기반으로 하는 첫 번째 표준 무선네트워크이다. IEEE 802.22는 라이선스 사용자의 충분한 보호와 주파수 대역 사용의 효율성을 극대화 하기 위해 Two-Stage 채널 센싱 기법을 제안하고 있다. 본 논문에서는 Two-Stage 채널 센싱의 오버헤드를 분석하고 센싱에 사용되는 시간이 오버헤드에 미치는 영향을 알아보고자 한다.

GNSS 신호를 이용한 지진에 의한 전리층 교란의 주파수 분석 (Analysis of Frequency of Seismogenic Ionospheric Disturbance by using GNSS Signal)

  • 김부겸;강선호;한덕화;송준솔;기창돈
    • 한국항행학회논문지
    • /
    • 제22권6호
    • /
    • pp.616-622
    • /
    • 2018
  • 규모가 큰 지진에 의해 발생한 에너지는 전리층까지 도달하여 교란을 발생시킨다. GNSS (global navigation satellite system) 위성의 신호의 전리층 지연을 분석하면 해당 교란을 검출할 수 있다. 지진에 의한 교란 검출에는 주로 band-pass filter가 사용되는데, 교란의 주파수에 맞는 주파수 대역 설정이 중요하다. 따라서 본 논문에선 GNSS 신호를 통해 지진에 의한 전리층 교란의 주파수를 분석하였다. 전리층 교란의 주파수 분석은 반송파의 geometry free combination으로 산출한 전리층 지연을 1 mHz high-pass filter로 처리한 후, fast Fourier transform을 통해 수행했다. 교란의 주파수 분석결과 초기 교란의 주파수는 4.5 mHz~11 mHz의 범위를 가지며, 5.7 mHz가 대표 주파수이다. 후속 교란의 경우 6 mHz~10 mHz의 주파수 대역을 가지며, 7.3 mHz가 대표 주파수로 관찰되었다.

가공 재질에 따른 공구 마멸의 특성 추출과 신경회로망을 이용한 마멸 검출 (Features Extraction of Tool Wear and its Detection using Neural Network)

  • 이호영;조동우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 추계학술대회 논문집
    • /
    • pp.89-94
    • /
    • 1995
  • A16061, SB41 and SM45C was used for developing tool wear monitoring system in face milling. First of all, Neural networks of which input are 8 $_{th}$ order AR morel parameters, frequency band energies, cutting conditions was used to monitor tool wear for each material. Finally, A unified neural network, which has tensile strengths of each material as an additional input, was constructed to consider the effect three materials on the features of tool wear. It was verified that tensile strength is the one of properties of workpiece materials.s.

  • PDF

부분 대역 전파 방해하에서의 바이내리 FSK 주파수 급도약 통신 시스템의 오차 성능에 관하여 (Error Performance of Binary FSK Fast Frequency Hopping(BFSK/FFH) Systems in the Presence of Partial-Band Noise Jamming)

  • 홍윤기
    • 대한전자공학회논문지
    • /
    • 제20권3호
    • /
    • pp.52-60
    • /
    • 1983
  • 본 논문에서는 부분 대역 전파 방해와 열잡음하에서 바이내리 FSK 변조와 noncoherent 수신을 이용한 주파수 급도약 스프레드 스펙트럼 통신 시스템을 쌨을 때의 오율 도출에 대한 해석을 보였다. 가장 효과적인 전파방해의 경우 오율성능을 수치 해법으로 구하였으며 고 결과를 비트급 도약수(L)을 파라미터로 하여 신호 비트에너지 대 전파 방해 밀도의 비(E /N )의 함수로 도시하였다.

  • PDF

풍력발전기 소음평가 (Wind Turbine Noise)

  • 정성수;전병수;서재갑;이용봉
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.431-434
    • /
    • 2014
  • Wind turbine industry is the most developing field among other renewable energy industry. As expanding wind farms, noise is the big problem to solve. This study is about wind turbine noise measuring method based on IEC 61400-11. Sound pressure levels, 1/3-octave band levels, and low frequency sound pressure levels of a 3 MW wind turbine were measured and analyzed.

  • PDF