• 한국산업정보학회논문지
• /
• 제20권3호
• /
• pp.19-28
• /
• 2015

스마트폰의 영상정보처리에 기반한 현장 진단기기 개발을 목표로 입자계수용 형광 smartscope와 DC 모터로 제어되는 입자정렬 시스템을 제작하였다. 크기가 작고 저렴한 비용으로 비전문가도 쉽게 다룰 수 있는 smartscope는 LED, 볼렌즈, 형광필터가 설치된 어댑터가 스마트폰 카메라 앞에 장착되어 전용 애플리케이션으로 형광입자와 형광염색된 백혈구를 계수할 수 있었다. 모터는 안드로이드 스마트폰의 블루투스 무선통신 기능을 통해 제어되었다. 나선형 미세유동채널이 축을 중심으로 회전하는 동안 백혈구와 크기가 유사한 입자가 정렬되는 현상을 관찰하였다. 모터로 회전 방향과 속도가 조절되는 입자 정렬 시스템은 많은 시간이 소요되는 수작업을 최소화하고 시료 전처리 과정을 자동화할 수 있으므로, smartscope와 통합될 경우 스마트폰을 이용한 현장진단기기에 활용될 수 있을 것이다.

• 한국정보통신학회논문지
• /
• 제12권4호
• /
• pp.620-626
• /
• 2008

체감형 게임 제작에서 필요한 충돌 감지를 위한 특징맵 방법을 제안한다. 특징맵은 충돌이 발생하는 물체들의 중첩 픽셀 비를 불변량으로 이용하는 방법으로 영상의 크기를 환경과 조건에 따라 조절해가면서 정할 수 있으므로 빠른 충돌감지가 가능하며 또한 충돌 부위도 감지 할 수 있는 장점이 있다. 이를 검증하기 위하여 web cam, 게임플레이어, 적캐릭터, 가상 오브젝트를 이용한 체감형 게임을 제작하고 특징맵을 사용하여 충돌 감지를 실험하여 그 타당성을 확인하였다. 이 방법은 게임에서 캐릭터 크기와 위치가 지속적으로 변화하는 경우 효과적인 충돌 감지를 위한 기본적인 알고리즘으로 응용될 수 있다.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.107-118
• /
• 2006

Recently, Korean's 3-D foot data have been extensively collected through 5th national anthropometric survey known as 'Size Korea'. In this study, Korean foot shape was investigated and subsequently classified, based on the existing standard for foot shaping. This study analyzed and categorized Korean foot shapes through the following methods. Although the data used in this study were limited to those of Korean adults, major factors affecting the foot shape were deduced and then categorically grouped by the multivariate statistical analysis. For those whose age ranged from 14 to 70, major factors affecting the foot shape for the male were related to foot breadth, ankle thickness, 1st toe shape, malleolus height, heel to top of the foot length, the ratio between toe-side and heel-side and 5th toe shape. For the female, the ball of foot height was added to the above factors. From the factors extracted, the Korean foot shape was categorized into three groups for the male and four groups for the female. They were the ladder type, the inverted triangle type and the square type. For the female, the triangular type was added to the three types. These findings will serve as useful information for the footwear production industry in Korea.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.835-842
• /
• 2002

In this paper, static and fatigue bending strengths and failure mechanisms of CFRP (carbon fiber reinforced plastics) laminates having impact damages have been evaluated. Composite laminates used for this experiment are CF/EPOXY orthotropy laminated plates, which have two-interfaces $[0^0_ 4/90^0_4]_{ sym}$. A steel ball launched by the air gun collides against CFRP laminates to generate impact damages. The damage growth during bending fatigue test is observed by the scanning acoustic microscope (SAM) and also, the fracture surfaces were observed by using the SEM (scanning electron microscope). In the case of impacted-side compression, fracture is propagated from the transverse crack generated near impact point. On the other hand, fracture is developed toward the impact point from the edge of interface-B delamination in the case of impacted-side tension. Eventually, failure mechanisms have been confirmed based on the observed delamination areas and fracture surfaces.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.56-61
• /
• 2015

In this study, the wear performance of manganese phosphate coating on SM45C with addition agent of Tartaric acid and Citric acid were investigated. The Surface morphology of manganese phosphate coating was examined by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray spectroscopy (EDS). It is found that Mn, P, Fe, O and C. The crystal structure and thee composition was analysis and determined by using XRD. The XRD results indicated that manganese phosphate coatings are mainly composed of $(Mn,Fe)_5H_2(PO_4)_44H_2O$ and consists of a lot of close packed lump crystalline. Based on the time dependence of morphology and the weight of manganese phosphate coating, it shows that the phosphating process mainly includes three stages: corrosion of the substrate, creation and growth of phosphate crystal nucleus and thickening of manganese phosphate coating. The wear tests were performed in a ball on disc apparatus as per ASTM G-99 Standard. It was showed that the initial wear was quite high followed by low sludge.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.200-204
• /
• 2016

본 연구에서는 유로형(EURO type) 클린 디젤 CRDI(common rail direct injection) 엔진용 오버플로우 밸브 성능 평가 시스템을 구현한다. 친환경 조건에 맞도록 정밀 기능을 구비한 오버플로우를 위해 스프링의 하중을 고려한 구현이 중요하다. 특히 정밀제어에 따른 디젤 차량의 성능평가는 연비 향상과 환경 규제 만족이 필연적이다. 이에 성능평가를 위한 평가 알고리즘의 기본 조건은 100cc 미만에서 3.0 bar, 150 cc 이상에서 3.3 bar, 250 cc이상에서 4.0 bar를 사용하여 시험한다.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.33-43
• /
• 1998

High cutting speeds and feeds are essential requirements of a machine tool structure to accomplish its basic function which is to produce a workpiece of the required geometric form with an acceptable surface finish at as high a rate of production as is economically possible. Since the bearings in high speed spindle units are the main heat source of the total cutting system, in this work, the thermal characteristics of the spindle bearing system with a tilting axis were investigated using finite element methods to improve the performance of the spindle bearing system. Based on the theoretical results, a specially designed prototype spindle bearing system has been manufactured. Using the manufactured spindle bearing system, the thermal characteristics were measured. From the comparison of the experimental results with the theoretical ones, it was found that the finite element method predicted well the thermal characteristics of the spindle bearing system.

• KSBB Journal
• /
• 제14권1호
• /
• pp.24-30
• /
• 1999

Brettanomyces custersli를 이용하여 신문지의 유가식 동시 당화발효에 의한 에탄올 생산에 대한 연구를 수행하였다. 유가식 동시당화발효에 의한 에탄올 생산을 효과적으로 수행하기 위한 초기 기질 투입 농도는 8%(w/v)이었고 효소의 비용을 감안한 최적 효소 농도는 cellulase의 경우 30EPU/g cellulase, $\beta$-glucosidase와 cellulase의 부피가 0.1(활성비 1.05)이었다. 앞에서 결정된 초기 조건들을 가지고 교반식 반응기에서 수행된 유가식 동시당화발효는 26.8g/L의 에탄올을 생산성에서 회분식 동시당화발효보다 약 2배의 값을 나타내었다.

• 대한세포병리학회지
• /
• 제12권2호
• /
• pp.89-95
• /
• 2001

The cytological distinction of carcinoma cells from reactive mesothelial cells in serous effusions nay be difficult or imposslble based on morphology alone, especially In specimens containing reactive mesothelial cells which form glandular or ball- or papillary-shaped conglomerates or which mimic malignant nuclear features. Calretinin is a newly reported immunocytochemical marker for mesothelial cells, which can potentially be utilized for facilitating this distinction. This study evaluated the usefulness of calretinin for the discrimination between reactive mesothelial and metastatic carcinoma cells in serous effusion. Immunocytochemical staining was undertaken on 33 benign reactive and 87 malignant serous effusion specimens with histologically confirmed diagnoses. The specimens including smears and cell blocks were stained with polyclonal antibody to calretinin by labelled streptavidin-biotin method. The positive expression of calretinin was noted In 32(97.0%) of 33 benign reactive effusions and 9(10.3%) of 87 malignant effusions. The sensitivity and specificity of the calretinin immunostaining for reactive mesothelial cells was 97.0% and 89.7%, respectively. In conclusion, calretinin is a useful marker for distinguishing between reactive mesothelial cells and carcinoma cells in serous effusions.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.237-242
• /
• 2014

Recently much research are has been done into the compositions of lead-free solders. As a result, there has been a rapid increase in the number of new compositions. In the past, the properties of these new compositions were determined and verified through drop-impact tests. However, these drop tests were expensive and it took a long time to obtain a result. The main goal of this study was to establish an analytical method capable of predicting the impact life-time of a new solder composition for board-level flip chips though the application of drop simulations using LS-DYNA. Based on the reaction load obtain with LS-DYNA, the drop-impact fracture cycles were predicted. The study was performed using a Sn-3.0Ag-0.5Cu solder (305 composition). To verify the reliability of the proposed analytical method, the results of the drop-impact tests and life-time analysis were compared, and were found to be in good agreement. Thus, the new analytical method was shown to be very useful and effective.