• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.420-421
• /
• 2010

In this paper, a multi-module selective battery equalizer for series-connected Li-ion battery pack is proposed. Selective Equalizer (SE) scheme achieves smaller volume and lighter weight than individual cell equalizer (ICE) by minimizing the part count of bulky circuit element. However, SE scheme shows slow balancing speed when the voltage imbalance simultaneously occurs in more than one cell. The proposed multi-module overcomes the problem by employing multiple power converters. Prototype hardware is implemented and experimented with 14Ah battery cells to validate the performance of the proposed equalizer.

• Journal of Korean Society for Quality Management
• /
• v.19 no.1
• /
• pp.141-150
• /
• 1991

This paper is aimed to construct a CIM(Computer Intergrated Manufacturing) model through optimal flexible manufacturing systems for factory automation in order to provide higher productivity. This paper provides a ease through an analytical method to construct flexible manufacturing systems for factory automation. The contents of this paper include forecasting of demands which analyze variation of demand using Winter's model, line balancing utilizing Lanked Positional Weight Method, and a case analysis through simulation by Monte Carlor Method. The result shows the manpower and net present value of investment have decreased 42% and 19.6%, respectively, and yearly net profit has increased 30%.

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.8-10
• /
• 1989

Sphene from the McDonald pegmatite near Bancroft, Ontario, Canada was analyzed using EPMA. It contains 4.3 to 6.3 weight percent of Nb2O5 with an average formula Ca1.02(Ti0.62Al0.22Nb0.07Fe0.06Ta0.01)Si0.99(O4.85F0.16). Three types of subtitutions are possible; 1)2Ti4+=(Nb, Ta)5+ + (Al, Fe3+), 2) Ti + O = (Al, Fe3+) + (F, OH), and 3) 2Ti + O = Fe2+ + (Nb, Ta)5+ + (F, OH). T재 different schemes of substitutions for balancing the analysis are considered when the iron is either all ferric or all ferrous. Assuming stoichiometry fo Ca and Si, a general formula derived from the two different schemes is Ca(Ti0.64Al0.22Fe3+0.06-X {{{{Fe_{x}^{2+} }} Nb0.01)Sio4.80-XF0.16(OH)0.04+x.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.27-36
• /
• 1993

This paper proposes a shortest path allocation algorithm over the processors on the hypercube system based on the message passing techniques with the optimized module allocation. On multiprocessor systems, how to divide one task into multiple tasks efficiently is an important issue due to the hardness of the life cycle estimation of each process. To solve the life cycle discrepancies, the appropriate task assignment to each processor and the flexible communications among the processors are indispensible. With the concurrent program execution on hypercube systems, each process communicaties to others with the method of message passing. And, each processor has its own memory. The proposed algorithm generates a callable tree out of the module, assigns the weight factors, constructs the allocation graph, finds the shortest path allocation tree, and maps them with hypercube.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.101-106
• /
• 2010

The purposes of this paper are to investigate an effect of weight of material and gender on postural stability and to introduce formulas for those. There were five levels of weights 0, 9, 18, 27 and 36 kg, and two levels of genders were conducted. Eight male and five female subjects participated in this experiment, ten tests were performed for each level of weights to measure the postural stability by using the stability platform. The effect of the genders and the load on the postural stability were statistically analysed by the two way ANOVA test and the regression analysis. The ANOVA test showed that the effect of weights was statistically significant on postural stability to the both male and female subjects. And the postural stability of female subjects was better than that of male subjects. A linear regression formula for the balancing time and the load and a formula for the reduction rate postural stability and the relative load were introduced by the regression analysis.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2405-2407
• /
• 2003

This study deals with the gait optimization of via points on biped robot. ZMP(Zero Moment Point) is most important index in a biped robot's dynamic walking stability. To stable walking of a biped robot, legs's trajectory and a desired ZMP trajectory is required, balancing weight's movement is solved by FDM(Finite Difference Method). In this study, optimal index is defined to dynamically static walking of a biped robot, and optimization of via points is applied by GA(Genetic Algorithm).

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.197-204
• /
• 2005

In this study, ground reaction force(GRF), absolute symmetry index(ASI) and coefficient of variation(CV) of fixed, single-axis and multi-axis prosthetic ankle assemblies were investigated to show the biomechanical evaluation for above knee amputees. In the experiments, 37 normal male volunteers, two male and two female AK amputees were tested with fixed, single-axis and multi-axis prosthetic ankle assembly. A gait analysis was carried out to derive the ratio of GRF to weight as the percentage of total stance phase for ten points. The results showed that fixed-axis ankle was superior to the other two ankle assemblies for the characteristic of forwarding and breaking forces. Multi-axis ankle was relatively superior to the other two ankle assemblies for gait balancing and movement of the center for mass. single-axis ankle was relatively superior to the other two ankle assemblies for CV and ASI of GRF.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1585-1592
• /
• 2018

Due to un-balancing weight allocation on the wheelchair the existing wheelchair system are faced with the risk of flipping or falling when a wheelchair goes up to a hill. In to order to be safer during riding the wheelchair, in this paper, we proposed a real-time new solution using the integrated Gyro Sensor and Tilt Sensor for controlling the balance. Because the typical property of wheelchair is for the special user who meets the difficulty in moving on foot the maintain the balance of wheel-chair systems have become important and helpful. In our method, we calculate the seat angle using information from Tilt Sensor. However, due to the law of inertia when a wheelchair is moving there is a deviation in the output value of Tilt Sensor. Therefore, we have to optimize the value of the angle by utilizing the acceleration that is the output of the Gyro Sensor. We took the advantages by using the combination of Gyro and Tilt sensors. Moreover, we also solved the consumption issue of the whole system. Through various experimentations with usage of ZigBee sensor module, the power consumption for the balancing system is reduced significantly.

• Journal of Intelligence and Information Systems
• /
• v.11 no.2
• /
• pp.59-79
• /
• 2005

Export containers in a container terminal are usually classified into a few weight groups and those belonging to the same group are placed together on a same stack. The reason for this stacking by weight groups is that it becomes easy to have the heavier containers be loaded onto a ship before the lighter ones, which is important for the balancing of the ship. However, since the weight information available at the time of container arrival is only an estimate, those belonging to different weight groups are often stored together on a same stack. This becomes the cause of extra moves, or rehandlings, of containers at the time of loading to fetch out the heavier containers placed under the lighter ones. In this paper, we use machine learning techniques to derive a classifier that can classify the containers into the weight groups with improved accuracy. We also show that a more useful classifier can be derived by applying a cost-sensitive learning technique, for which we introduce a scheme of searching for a good cost matrix. Simulation experiments have shown that our proposed method can reduce about 5$\sim$7% of rehandlings when compared to the traditional weight grouping method.

• Korean Journal of Community Nutrition
• /
• v.4 no.3
• /
• pp.366-374
• /
• 1999

The purpose of this study was to investigate the change in food habits of girl students 1985 and 1998. A similar study had been conducted in 1985 and this study was carried in May, 1998 using the questionnaires. The subjects were 746 female students in middle school, high school and university students living in Jeonbuk region. The average score of food habit was $4.11{\pm}1.63$ out of a possible 10. This averge is lower than the 4.91 score in 1985, especially the score of university students lowered from 4.80 points to $3.52{\pm}1.58$ points. The correlation coefficient between the score of food habit and standard of living, utilizing increase as compared with the 54.9% in 1985. The most preferred side-dish changed from fried food to Kimchi. The preference of snacks was not changed. Eating bread increased at breakfast but eating noodles increased at lunch. University students' lunch basket preparation ratio decreased from 32.6% to 3.3%, so they had more noodles at refectory than lunch basket. The reason for skipping breakfast did not changes, but skipping lunch changed from annoyance due to lunch basket preparation to lack of time and no appetite. Skipping supper was changed from missing time to weight control. Having supper at home decreased from 96.6% to 75.9%. Substitution food on no preparation of lunch basket was changed from bread to noodles. The preference for biscuits and snack did not changes but fewer students preftered bread and fried food. In order to improve the nutritional status of the girl students, they must establish good food habits, especially by eating 3 regular meals per day and balancing their diet they should also be notified that severe weight control is very harmful for health.