• Journal of Mechanical Science and Technology
• /
• v.16 no.7
• /
• pp.999-1008
• /
• 2002

The spray structures and distribution characteristics of liquid and vapor phases in non-evaporating and evaporating Gasoline Direct Injection (GDI) fuel sprays were investigated using Laser Induced Exciplex Fluorescence (LIEF) technique. Dopants were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to study internal structure of the spray, droplet size and velocity under non-evaporating condition were measured by Phase Doppler Anemometry (PDA). Liquid and vapor phases were visualized at different moments after the start of injection. Experimental results showed that the spray could be divided into two regions by the fluorescence intensity of liquid phase: cone and mixing regions. Moreover, vortex flow of vapor phase was found in the mixing region. About 5㎛ diameter droplets were mostly distributed in the vortex flow region. Higher concentration of vapor phase due to vaporization of these droplets was distributed in this region. Particularly, higher concentration of vapor phase and lower one were balanced within the measurement area at 2ms after the start of injection.

• The International Journal of Costume Culture
• /
• v.4 no.2
• /
• pp.77-85
• /
• 2001

The purpose of this study was to classify the somatotype around a upper body of 30's men. The subjects were 202 working men aged from 30 to 39 and the data of 33 items including computed items were analysed by factor analysis and cluster analysis. Re results were as follows: As a factor of somatotype in evaluating males in 30's, the horizontal area represented the chest circumference at scye and the breadth items, the vortical region indicated hit length posterior, front length, back length, the breadth difference and the length difference. The somatotype by cluster analysis was classified with 3 type. Type I as the Roher's index 1.21 indicating the smallest in the circumference and weight item was classified as the thin and long featuring bending somatotype. Type 2 with the Rohrer's index 1.35 showing the mid-group between type 1 and 3 had the highest distribution rate as the balanced featuring the standard somatotype. Type 3 as the rohrer's index 1.40 was the largest physical condition group in the obesity featuring the turning over somatotype.

• KIEAE Journal
• /
• v.8 no.5
• /
• pp.61-68
• /
• 2008

For the recycling of the resources and the preservation of the environment, this study's purpose is to measure flexural behavior of the reinforced concrete beams with the major variables like concrete strength, replacement ratio of the recycled aggregate and the waste foundry sand and the tension reinforcement ratio and to present the data of the recycled aggregate used for the structure design. The experiment on the flexural behavior resulted in the followings. The ultimate strength of recycled R/C beam was manipulated proportionate to the tension reinforcement ratio, however the strength instantly decreased after passing the ultimate load due to the destroyed concrete of the compression side. The deflection at the maximum load varied from the tension reinforcement ratio by 5.5 times. The test specimen with the tension reinforcement ratio less than $0.5{\rho}b$ showed constant curve without change in the load from the yield to the ultimate load in contrast to the distinctive plastic region where the displacement was rising. Although the strain of main tension steel with the reinforcement ratio indicate different, the design of recycled concrete member can be applied for current design code for reinforced concrete structure as the ratio of tension reinforcement district the under the reinforcement ration in a balanced strain condition.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.261-264
• /
• 2005

This paper presents the design of a down-conversion mixer with built-in active balun integrated in a $0.25\;{\mu}m$ pHEMT process. The active balun consists of series-connected common-gate FET and common-source FET. The designed balun achieved broadband characteristics by optimizing gate-width and bias condition for the reduction in parasitic effect. From DC to more than 6GHz, the active balun shows the phase error of less than 3 degree and the gain error of less than 0.4 dB. A single-balanced down-conversion mixer with built-in broadband active balun has been designed with optimum width, load resistor and bias for conversion gain and without any matching component for broadband operating. The designed mixer whose size of including on-chip bias circuit is $1\;mm{\times}1\;mm$ shows the conversion gain of better than 7 dB from 2 GHz to 6 GHz and $P_{1dB}$ of -10 dBm at 5.8 GHz

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.93-98
• /
• 2017

PURPOSE: This study investigated the activities of lower limb muscles according to the angle of a medio-lateral ramp while walking to promote awareness of the risks associated with a medio-lateral ramp. METHODS: This study was conducted on 20 healthy male adults. The muscle activities of the vastus medialis oblique (VMO), vastus lateralis oblique (VLO), tibialis anterior (TA) and peroneus longus (PL) were measured while the subjects were walking on a 3 m medio-lateral ramp. Five angles (flat, $2^{\circ}$, $5^{\circ}$, $10^{\circ}$, and $15^{\circ}$) were selected for the angle conditions of the experiment on a medio-lateral ramp. The activities were measured during the stance phase only in the middle cycle of a three-cycle walking experiment. The mean value obtained from the three walking tests was used for the analysis. RESULTS: Results showed that walking on a mediolateral ramp required more muscle activities than walking on a flat surface, through which balanced walking was achieved. CONCLUSION: Walking on a medio-lateral ramp requires proper muscle activation and control, without which the risks of injury to the joints of the lower limbs and falls are likely to increase. Therefore, special attention should be given to older people and the disabled under the condition of traversing a ramp.

• Journal of the Korean Ceramic Society
• /
• v.28 no.10
• /
• pp.810-818
• /
• 1991

Fracture responses of Al2O3 tubes were investigated for various loading paths under combined tension/torsion. The fracture criterion did not depend on loading paths. Fracture angles agreed well with the maximum tensile stress criterion. As the loading condition approaches a shear dominant state, the tensile principal stress at fracture increases compared to the uniaxial fracture strength. By using the Weibull modulus obtained from tension and torsion tests, the Weibull statistical fracture strengths were compared with experimental data. This comparison suggests that fracture may occur at the surface of the specimen when tensile stress is dominant, but within the volume of the specimen when shear stress is dominant. The Weibull fracture strength increased as the loading conition approached a shear dominant state, but underestimated compared to experimental data. Finally, a new fracture criterion was proposed by including the effect of compressive principal stress. The proposed criterion agreed well with experimental data of Al2O3 tubes not only at combined tension/torsion but also at balanced biaxial tension.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2254-2260
• /
• 2011

This paper presents the introduction plan of the renewable energy in innovation city. The introduction plan to make the condition of innovation city best should consider the economical efficiency, the quality of life and the sustainable development. The design of balanced city is demanded to build environment friendly and sustainable city. Energy efficient buildings should be designed to deal with the energy efficiency and environment problem. Therefore, in this paper, we analyze the energy efficiency and provide the method to introduce the renewable energy system, in various buildings. As a result, the renewable energy plans of each innovation city are suggested and analyzed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.4
• /
• pp.45-52
• /
• 1990

Government has propelled strongly the Agricultural - cum - Industrial region development project in the nation wide. This project will not only provide employment opportunity for rural inhabitants, but also be designed to activate the rural economy. In addition, it will lead to a balanced development between the urban and rural areas. Under this project, building sites of 3 to 30 hactres will be established in the rural area in order to settle factories which are suitable to the rural condition. In this report, the researches which relating to the achievement conditions of planning, design and constructions of the building sites and the contribution conditions of Agri. - cum - Industrial Region development projects, activated to the rural economy and regional development in the Kyungpook regional areas, were surveyed and studied. On the average evaluation studies the results are as follows : 1. The achievement conditions of the planning, design and construction of the building sites. Very good 27.0 % Good 47.0 % Fair 24.0 % Poor 2.0 % 2. The contribution conditions of the Agri - cum - Industrial factories managements. Very good 17.0 % Good 41.0 % Fair 32.0 % Poor 10.0 %

• Journal of the Korean Society of Food Culture
• /
• v.28 no.3
• /
• pp.261-271
• /
• 2013

The purpose of this study was the development of traditional food recipes from local food contents related to the historical and cultural heritage in the representative long-lived area Damyang. The information on digging 'story' was collected through the region's representative local native journal, searching for related websites, analyzing old literatures, and interviewing traditional household; 'telling', the part of conveyance, was organized by reviewing the literatures, including historical condition, regional food materials, cuisine, region symbolism, etc. After nutritional analysis, the prepared, balanced, and healthy Korean food dishes using the traditional food contents were displayed. In Damyang, the story was extracted from Heuichoon Ryu (柳希春, 1543-1577) - figura of Damyang - and his collection, 'Miam's diary', and described about native food. The traditional history of many foods that were used mainly as rewarding during one's trouble, showing good faith, and delivering gratitude is recorded in Miam diary. A little effort has been made to express the classical scholar's clean and neat dining table which was the mixed Damyang's clean image and nobleman's straight integrity in the middle of the Choson Dynasty. Nutrition fact of 'Miam's table' was based on the Daily Reference Values of Koreans aged 65 or older.

• Journal of the Korean Society of Combustion
• /
• v.12 no.2
• /
• pp.26-33
• /
• 2007

To reveal the newly found liftoff height behavior of hydrogen jet, we have experimentally studied the stabilization mechanism of turbulent, lifted jet flames in a non-premixed condition. The objectives of the present research are to report the phenomenon of a liftoff height decreasing as increasing fuel velocity, to analyse the flame structure and behavior of the lifted jet, and to explain the mechanisms of flame stability in hydrogen turbulent non-premixed jet flames. The velocity of hydrogen was varied from 100 to 300m/s and a coaxial air velocity was fixed at 16m/s with a coflow air less than 0.1m/s. For the simultaneous measurement of velocity field and reaction zone, PIV and OH PLIF technique was used with two Nd:Yag lasers and CCD cameras. As results, it has been found that the stabilization of lifted hydrogen diffusion flames is related with a turbulent intensity, which means that combustion occurs at the point where the local flow velocity is balanced with the turbulent flame propagation velocity.