• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.45-49
• /
• 2011

The aim of study intends to investigate effect of weight of fire-protective clothing for physical balance and agility after maximum physical activity and to provide the base data for the safety of firefighter. For evaluation of static and dynamic-balance, the closed-eyes foot balance and the beam-walking were performed respectively. For evaluation of static and dynamic-agility, the whole body reaction and the side-step were carried out. This study demonstrates that after maximum physical activity, the weight of fire-protective clothing effects on physical static-balance and dynamic-agility and suggests that it could be useful for actual safety field studies of firefighters.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.49-58
• /
• 2009

This study aims to analyze the association between the center of mass(C.O.G) and ocular movement(E.O.G) according to the success and failure in the left turn motion on the balance beam, targeting three female gymnasts. When successful, the left-right C.O.G was moved to the left, which was a rotational direction until such time as the body rotated $180^{\circ}$, whereas there appeared to be a greater movement during failure; thus, it was shown to affect the maintenance of dynamic postural control. In case of the subsequent left-right turning motion of E.O.G, this matches the previous theory that the eyeball moves against the direction of rotation of the body. However, there was a difference at the time of movement, and a clear difference emerged in the success and failure in this study. Also, in the E.O.G in the up-down direction, a movement during failure showed a pattern of down direction in most cases; thus, it is deemed to affect the failure. Therefore, the kinetic postural control and E.O.G are supposed to affect the success and failure in a landing, which is the most importantly evaluated movement on the balance beam, in mutual association.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.61-69
• /
• 2008

The purpose of this study is to examine the success or failure on the balance beam in element group requirements posture which is bending salto side-ward tucked through kinetic analysis. The national team players were participated. The goal was to present training methods to coaches and athletes so as to provide scientifically useful information. The results from this study were summarized as below. When the performance was successful, the features of the body's center of gravity during the side somersault motion showed to spread from the center of the balance beam and the center of the gravity moved to the direction of the body's rotation. In the spring sections - event2 and 3, when the performance was successful, up/down fluctuation became more wider and increased air time. It supported the result that the projecting variable was higher than in failure trial. In addition, the right side hip joint angles and speed, and angular velocity as jumping up for a leap were larger than in failure trial. Those variables showed the optimal conditions for a leap. By increasing the speed of the upper limb from the shoulder and the speed of the shoulder joint angular velocity, the momentum was increased. Especially the right side shoulder joint angular velocity increased dramatically because the right leg was held. As to the side somersault motion, the angular momentum of successful trial with respect to x-axis was bigger than failed trial. It indicated that the increasing angular momentum with respect to x-axis was an important factor in flying motion. Besides, as to side somersault, the appropriate proportion of angular momentum with respect to y-axis and z-axis was a key to successful trails.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.71-76
• /
• 2012

Objectives : The purpose of this study was to evaluate the neuroprotective effect of Pueraria lobata extract on focal cerebral ischemia in mice. Methods : Focal cerebral ischemia was induced by occlusion of the right middle cerebral artery using the intraluminal filament model. ICR male mice underwent 90 minutes of middle cerebral artery occlusion (MCAo) followed by 24 hours of reperfusion. Mice were administered Pueraria lobata extract orally at the dose of 300mg/kg just prior to reperfusion. Rotarod test and balance beam test were practiced to assess sensory-motor function 23 hours after MCAo. In rotarod test, the latency to fall on the accelerating rotarod was recorded for 5 min. In balance beam test, the score was graded according to number of slips and latency to cross. The infarct volume was measured 24 hours after MCAo using 2% 2,3,5-triphenyltetrazolium chloride (TTC) staining. Results : Pueraria lobata extract treated group showed significant reduction in infarct volume by 27.3% compared to control group (p<0.05). In rotatod test, it also showed significant extension of latency time compared to control group ($67.82{\pm}15.08$ vs. $5.62{\pm}1.06$, p<0.001). In contrast to performance in rotarod test, that in balance beam test did not improve with Pueraria lobata extract treatment. Conclusions : We conclude that Pueraria lobata extract has a significant neuroprotective effect and reduces damage of sensory-motor function in MCAo model. These findings suggest that Pueraria lobata could be a potent neuroprotective agent.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.284-287
• /
• 2001

This paper presents the robust control simulation of a composite beam using self-sensing actuators(SSA). The self-sensing actuator is a new concept for intelligent material, where a single piezoelectric element simultaneously functions as both a sensor and an actuator. In a practical implementation of the self-sensing actuator an electrical bridge circuit is used to measure strain. The circuit could provide significant information about strain in the element if it were well-balanced. Our aim is design a robust controller which guarantees that the performance of a self-sensing actuator is robust against perturbation of the bridge balance and to confirm the advantages of this technique. Simulation results show that the self-sensing actuator driven by the designed controller exhibits excellent performance in suppressing the vibration of a composite beam.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1779-1781
• /
• 1997

The 2.0 GeV Pohang Light Source (PLS) is consisted of a full energy Linac and a storage ring. Four kicker magnets are installed in the storage ring tunnel to move the stored beam orbit in the storage ring closer to the injected beam from the beam transfer line. The injected beam then falls into the storage ring beam dynamic aperture. A kicker magnet modulator drives all four kicker magnets to maintain field balance and also synchronized kick of the beam. The kicker modulator can handle 2 GeV full energy beam. The kicker magnet modulator is installed in the storage ring tunnel and under stable operation. Specification of the kicker magnet modulator is ${\sim}6.0{\mu}s$ pulse-width, 200 ns flat-top width with ${\pm}0.2%$ regulation, ${\sim}24\;kA$ peak current, and 10 Hz repetition rate. Two thyratron switches (EEV CX-1536AX) are used in the system. In this article, design, and experimental results of the kicker magnet modulator are discussed.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.220-225
• /
• 2004

A new ion beam extraction system is designed using a simple ion mass filter and a micro mass balance and a QMS based detecting system. A quadrupole Mass Filter is used for selective ion beam formation from inductively coupled high density plasma sources with appropriate electrostatic lens and final analyzing QMS. Also a quartz crystal microbalance is set between a QMF and a QMS to measure the etching and polymerization rate of the mass selected ion beam. An inductively coupled plasma was used as a ion/radical source which had an electron temperature of 4-8 eV and electron density of $4${\times}$10^{11}$＃/㎤. A computer interfaced system through 12bit AD-DA board can control the pass ion mass of the qmf by setting RF/DC voltage ratio applied to the quadrupoles so that time modulation of pass ion's mass is possible. So the direct measurements of ion - surface chemistry can be possible in a resolution of $1\AA$/sec based on the qcm's sensitivity. A full set of driving software and hardware setting is successfully carried out to get fundamental plasma information of the ICP source and analysed $Ar^{+}$ beam was detected at the $2^{nd}$ QMS.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.257-268
• /
• 1997

The elastic deflections and Euler buckling loads are investigated for a class of tapered and initially curved cantilevered beams subjected to loading at the tip. The beam's width increases linearly and its depth decreases linearly with the distance from the fixed end to the tip. Unloaded, the beam forms a circular are perpendicular to the axis of bending. The beam's deflection responses, obtained by solving the differential equations in closed form, are presented in terms of four nondimensional system parameters: taper ratio ${\kappa}$, initial shape ratio ${\Delta}_0$, end load ratio f, and load angle ${\theta}$. Laboratory measurements of the Euler buckling loads for scale models of tapered initially straight, corrugated beams compared favorably with those computed from the present analysis. The results are applicable to future designs of the end structures of highway guardrails, which can be designed to give the appropriate balance between the capacity to deflect a nearly head-on vehicle back to its right-of-way and the capacity to buckle sufficiently that penetration of the vehicle may be averted.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.185-190
• /
• 1995

In recent years, many researcher have been interested in the stability of a thin beam. Among them, Pai and Nayfeh[1] had investigated the nonplanar motion of the cantilever beam under lateral base excitation and chaotic motion, but this study is associated with internal resonance, i.e. one to one resonance. Also Cusumano[2] had made an experiment on a thin beam, called Elastica, under bending loads. In this experiment, he had shown that there exists out-of-plane motion, involving the bending and the torsional mode. Pak et al.[3] verified the validity of Cusumano's experimental works theoretically and defined the existence of Non-Local Mode(NLM), which is came out due to the instability of torsional mode and the corresponding aspect of motions by using the Normal Modes. Lee[4] studied on a thin beam under bending loads and investigated the routes to chaos by using forcing amplitude as a control parameter. In this paper, we are interested in the motion of a thin beam under torsional loads. Here the form of force based on the natural forcing function is used. Consequently, it is found that small torsional loads result in instability and in case that the forcing amplitude is increasing gradually, the motion appears in the form of dynamic double potential well, finally leads to complex motion. This phenomenon is investigated through the poincare map and time response. We also check that Harmonic Balance Method(H.B.M.) is a suitable tool to calculate the bifurcated modes.

• Structural Engineering and Mechanics
• /
• v.73 no.3
• /
• pp.287-302
• /
• 2020

This investigation deals with a size-dependent coupled thermoelasticity analysis based on Green-Naghdi (GN) theory in nano scale using a new modified nonlocal model of heat conduction, which is based on the GN theory and nonlocal Eringen theory of elasticity. In the analysis based on the proposed model, the nonlocality is taken into account in both heat conduction and elasticity. The governing equations including the equations of motion and the energy balance equation are derived using the proposed model in a nano beam resonator. An analytical solution is proposed for the problem using the Laplace transform technique and Talbot technique for inversion to time domain. It is assumed that the nano beam is subjected to sinusoidal thermal shock loading, which is applied on the one of beam ends. The transient behaviors of fields' quantities such as lateral deflection and temperature are studied in detail. Also, the effects of small scale parameter on the dynamic behaviors of lateral deflection and temperature are obtained and assessed for the problem. The proposed GN-based model, analytical solution and data are verified and also compared with reported data obtained from GN coupled thermoelasticity analysis without considering the nonlocality in heat conduction in a nano beam.