KICKER MAGNET MODULATOR IN PLS

포항방사광가속기 킼커 대출력 펄스전원장치

  • Nam, S.H. (Pohang Accelerator Laboratory, POSTECH) ;
  • Jeong, S.H. (Pohang Accelerator Laboratory, POSTECH) ;
  • Han, S.H. (Pohang Accelerator Laboratory, POSTECH) ;
  • Suh, J.H. (Pohang Accelerator Laboratory, POSTECH) ;
  • Ha, K.M. (Pohang Accelerator Laboratory, POSTECH)
  • 남상훈 (포항가속기연구소, 포항공과대학교) ;
  • 정성훈 (포항가속기연구소, 포항공과대학교) ;
  • 한성훈 (포항가속기연구소, 포항공과대학교) ;
  • 서재학 (포항가속기연구소, 포항공과대학교) ;
  • 하기만 (포항가속기연구소, 포항공과대학교)
  • Published : 1997.07.21

Abstract

The 2.0 GeV Pohang Light Source (PLS) is consisted of a full energy Linac and a storage ring. Four kicker magnets are installed in the storage ring tunnel to move the stored beam orbit in the storage ring closer to the injected beam from the beam transfer line. The injected beam then falls into the storage ring beam dynamic aperture. A kicker magnet modulator drives all four kicker magnets to maintain field balance and also synchronized kick of the beam. The kicker modulator can handle 2 GeV full energy beam. The kicker magnet modulator is installed in the storage ring tunnel and under stable operation. Specification of the kicker magnet modulator is ${\sim}6.0{\mu}s$ pulse-width, 200 ns flat-top width with ${\pm}0.2%$ regulation, ${\sim}24\;kA$ peak current, and 10 Hz repetition rate. Two thyratron switches (EEV CX-1536AX) are used in the system. In this article, design, and experimental results of the kicker magnet modulator are discussed.

Keywords