• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.104-113
• /
• 1992

The hydrodynamic problem is treated here when a pressurized bag is submerged partially into water and the end points of it oscillate. SES(Surface Effect Ship)has a bag filled with pressurized air at the stern in order to prevent the air leakage, and the pitch motion of SES is largely affected by the hydrodynamic force of the bag. The shape of a bag can be determined with the pressure difference between inside and outside. Once the hydrodynamic pressure is given, the shape of a bag can be obtained, however in order to calculate the hydrodynamic pressure we should know the shape change of the bag, and vice versa. Therefore the type of boundary condition on the surface of a bag is a moving boundary like a free surface boundary. In this paper, the formulation of this problem was done and linearized. The calculation scheme for the radiation problem of an oscillating bag is shown in comparison with the case that the bag is treated as rigid body. The hydrodynamic forces are calculated for various values of the pressure inside the bag and the submerged depth.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.102-106
• /
• 2012

The purpose of this paper is to study the failure cases in relation to system of Air Bag in vehicle happened in the field. In the first example, it was separated the soldering parts connected the wire pin between air bag module and clock spring of air bag. Whenever the pin shake by the car's vibration, the driver verified the malfunction phenomenon appeared air bag warning lamp on instrument panel in front of driver's seat. in car inside room. The second example, it verified the warning lamp lighting phenomenon of air bag by produced the circuit plate non-contacting of single an element in air bag electronic control unit. The third example, it verified the light of air bag warning indicator lamp by separated with soldering parts connecting inner pin and resistance terminal of seat belt pretensioner using passenger seat. The fourth example, when the passenger car crash a back of truck, the former bumper get jammed under the latter as the roof height of car low less than that. Therefore, the impact of Car's collision verified that don't transfer with body frame of vehicle because of no attachment impact sensor in it.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.33-39
• /
• 2010

This study is to reduce the rate of drowning accident by using of buoyancy bag. People are exposed to the high risk of drowning accident when they have water leisure activities due to the lack of safety mind-set and shortage of safety products. In case of drowning accident, the rescue action is normally depending on the other people's assistance. Therefore, rescue activities which relyn the people doesn't improve the ratio of survival in the drowning accidents. The submarine specialists should use the buoyancy products to rescue the people in the drowning accident. The citizen can carry portable buoyancy product in the automobile as well as by hands anywhere and anytime. It will be effective rescue tool to save his/her life in the emergency. In addition, it will contribute to rescue other's life because it can be used immediately. There are 3 positive characteristics on the buoyancy bag. First, it is convenience. Documents and other stuffs can be kept in the bag. Second is safety. The material of buoyancy is placed in the inner of the bag. It is possible to float the person whose weight is 90 kg. Lastly, it is durability. It can be used long-term because the outer of the bag is made of anti-water material and anti-water zipper. As a result of performance analysis, it is evident that the buoyancy bag can be used to rescue the people in the drowning accident as a indirect rescue tool compared with the current other rescue products. It is recommended that the design of outer box and performance of buoyancy are required to be improved in order to contribute more to rescue people in the accident.

• Korean Journal of Plant Resources
• /
• v.13 no.2
• /
• pp.111-117
• /
• 2000

In an attempt to select grape bag, which elevates grape quality and make easy maturation period determination, the following research was carried out at Chungbuk Institute of Agricultural Technology, Grape Experiment Station. Light transmittance rate of bag reached to 11-65% with non-woven fabric and non-dripped vinyl bags. Non-dripped vinyl perforation and white painting bag resulted in 50 and 75%, respectively. Berry weights in non-woven fabric and non-dripped vinyl bag were high than that in paper bag. Non-dripped vinyl perforation 50%, white painting bag brought into fruit cracking, shattering, and rotten fruit, making the investigation difficult. Maturation period preceded about 1-4 day with non-woven fabric and non-dripped vinyl compared with that in paper bag. Soluble solids content with non-woven fabric and non-dripped vinyl bags was high and acidity showed a reverse result. Coloring extent was developed rapidly with non-woven fabric and non-dripped vinyl than paper bag. During initial state of coloring, coloring was rapid with Maekban-Stone mixed non-woven fabric and non-dripped vinyl + non-woven fabric bag. This was rapid with non-woven fabric bag as long appropriate maturation period. Abnormal berry rate was 5.4-7.0% with paper and non-woven fabric bags but brought about as much as 16.6-100% with non-dripped vinyl and it's mixed bags. Appearance quality was the best with index 9.0 for non-woven fabric bag. Maekban-Stone mixed non-woven fabric but non-dripped vinyl performance 50% white painting bag was the least, showing index 1.0. The time consumed for maturation determination was reduced to 74-93% with non-woven fabric and non-dripped vinyl bag compared with 17.4h/10a with paper bag.

• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.280-287
• /
• 2015

Sujeonggwa is a popular Korean traditional beverage. However, consumers only prepare it at home on special occasions due to the time and effort required. Developing a convenient form of Sujeonggwa may promote its consumption. The objectives of this study were to 1) develop Sujeonggwa in a tea bag using different sweeteners and 2) describe the characteristics of Sujeonggwa's flavor in tea bag samples and 3) determine how well consumers accept the tea bag samples. A total of four types of Sujeonggwa in a tea bag were developed: two samples with varying amount of sugar, another sample using sugar and stevia and the last sample using sugar and short chain fructo-oligosaccharide as a sweetener. A commercial ginger tea and cinnamon tea were used as control products. Descriptive analysis was conducted on the same six samples and a descriptive panel identified its attributes. A total of 61 consumers evaluated acceptability using a nine-point hedonic scale and how they felt about intensities of the samples using a just-about-right scale. The results indicated that consumers liked Sujeonggwa samples in a tea bag more than commercial ginger tea and cinnamon tea.

• Journal of Environmental Science International
• /
• v.32 no.11
• /
• pp.801-809
• /
• 2023

The purpose of this study is to predict the reflection distance following to the pulsing pressure, total air supplying, filter bag size using numercial analysis techniques and use it as an efficient operation condition and economic data for off-line type pulse air jet bag filter. In this research, filtration area 6 m² condition, calculate filter resistance coefficient for simulation through the main experiments using coke dust. Ansys fluent V19.0 apply to CFD simulation, and analysis pulsing characteristics about pulsing pressure, filtration velocity and nozzle diameter. The maximum reflecting distance of off-line type pulse air jet bag filter is 1,000 mm regardless of total air supplying at over the 42 L/m² conditions, that indicates off-line type can extend filter bag length 1,000 mm than on-line type. In order to effective primary and secondary pulsing of off-line type pulse air jet bag filter, over the 5 bar of pulsing pressure and over the 42 L/m² of total air supplying are needed.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.2
• /
• pp.156-160
• /
• 2004

This study was carried out to examine the changes of chlorophyll a and b contents by the extraction temperatures and the number of soaking using five kinds of Korean green teas(3 kinds of green tea and 2 kinds of tea bag) which were obtained from a local market in Daegu city, Korea. The chlorophylls were extracted with 80% acetone, and determined by a visible spectrophotometer. The concentration of chlorophyll in Sulrok(tea bag) were the highest among all kinds of teas when they were extracted at 60, and decreased with the number of soaking increased. On the other hand, the chlorophyll content of green teas was the highest at 80, and decreased with the increase of the number of soaking as the tea bag did. It was found that the Korean tea bag contained more chlorophyll than green teas did, and green teas contained significantly more chlorophyll b than chlorophyll a.

• Applied Biological Chemistry
• /
• v.32 no.3
• /
• pp.265-269
• /
• 1989

Effects of air-tighteness of packing material and aluminum phosphide fumigation on mortality of rice weevil were studied during rice storage. Air-tight storage of rice in sealed bag of 0.1mm PE film or sealed glass bottle reduced the deterioration of rice quality and killed all rice weevils after 60 days storage, while paper bag, PP bag and straw bag storage kept them alive. One tablet of aluminum phosphide in one cubic meter heap of rice packed in PP bag was sufficient to kill all rice weevil in it, when the heap was covered by 0.15 mm PE film during fumigation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2015

Advanced countries in the aviation industry, especially the United States and European Union, develop and commercialize their own SBD system integrated with IT convergence technology, dominating the international market. Nevertheless, most of SBD technologies in domestic airports rely on other countries. It is imperative that internal airport operators introduce the Self Bag Drop system and produce, apply, and manage the most optimized SBD system for airports and airlines. Upon analyzing the tendency and operation of the SBD system utilized in leading international airports, this is conducted to address the possibility of the future implementation in domestic airports.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.282-289
• /
• 2011

Rapid screening method for the determination of the emissions of pollutants from vehicle interior parts and materials have been developed as ISO 12219-2 which is using bag and based on a static condition. The method was not controlled humidity in the test bag, so it is not suitable test method for formaldehyde emission test which is highly related to humidity condition. In this study, possibility of control humidity in the static test bag by adding extra water and the effect of humidity condition for formaldehyde emissions have been investigated. The relative humidity in the test bag was affected not only amount of water added also material of test bag and test specimen. The emission intensity of formaldehyde was increased according to increasing relative humidity in test bag. But excessively supplied water was condensed on the inner surface of test bag and surface of sample specimen that were sorption formaldehyde and were reduced its emission intensity.