• 수산해양기술연구
• /
• 제40권4호
• /
• pp.255-267
• /
• 2004

기선권현망어업의 어구 개량과 조업시스템 개선을 목적으로 자루그물을 A, B 2가지로 달리한 축소형 개량어구를 설계, 제작하여 현장조업선에 의한 해상실험을 실시하여 어구의 형상을 관찰한 결과를 요약하면 다음과 같다. 1. 축소형 개량어구의 실제 전개율은 오비기에서 20% 정도로 가장 작았고, 뒤쪽으로 갈수로 커지며, 자루그물에서는 110% 정도로 가장 컸으며, B형이 A형에 비하여 5~10%정도 크게 나타났다. 자루그물 입구와 뒤끝의 망고 변화폭은 A형이 9.0~13.6, 9.3·10.4m이고, B형이 10.9~14.8, 5.8~8.0m로 나타나서 B형이 A형에 비하여 자루그물 입구는 1~2m 크고, 뒤끝은 2~3m 작았다. 2. 축소형 개량어구는 오비기의 수직방향 전개성능이 개선되어 수비에 이르기까지의 예망수층이 완만하게 형성되었으며, 예망수층의 변화폭이 기존어구에 비해 적게 나타났다. 나발 그물이 포켓형상을 개선시켜 그물코의 날림현상 감소와 수비에서 자루그물까지의 어구형상이 완만하게 이루어졌으며, 예망속도가 느린 경우에도 어구의 형상이 안정되었다. 3. 축소형 개량어구 B형은 자루그물의 변화폭이 적었고, 이중깔대기의 부착으로 인해 입망된 어군의 도피율이 감소하였다.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.147-155
• /
• 2005

This study was conducted in order to improve the automatic fishing operation system for anchovy boat seine by comparison with the fishing gear geometry and efficiency using the labor saving nets and the combined type net with midwater trawl. Field experiments were carried out to observe the geometry of nets and improve the fishing operation system by catcher boats. The vertical net opening of fore wing net, square, fore bag net and after bag net of the combined type net were varied in the range of 9.9~12.9. 16.2~28.2, 6.8~12.1 and 9.5~15.2m respectively, when the towing speed was 1.0m/sec and the distance between boats were 100m, 200m, 300m. The vertical net opening of the combined type nets was gradually decreased as function of with increasing the distance between catcher boats. Labor saving net which was maintained the net opening and towing depth stable was more suitable for the automatic hauling operation system by improvement of bag net rather than the combined type nets which was impossible in swallow depth and near to anchovy school. 3 boats hauling operation system of the labor saving net was carried out by crane with power block in 2 catcher boats for improvement of hauling operation and pushing equipment of anchovy cooking system in the processing boat for maintain more anchovy in dry frame. From the results of field experiments, 3 boats hauling operation system with power block and improved cooking system was very 3 boats hauling operation system with power block and improved cooking system was very useful and more practical as hauling time 20~35min and No. of fishermen 12~13 in comparison with the traditional system such as hauling time 30~50 min and No. of fishmen 28~38.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.277-283
• /
• 1999

For the purpose of leading horse mackerel Trachurus japonicus schools, mackerel Scomber japonicus schools and arrow squid Todarodes pacificus schools, which migrate to the Cheju coast and are caught by the set-net, to the set-net by attracting lamps, we made five attracting lamps and took a practical experiment in the Gwiduk and Dongbuk set-net fishing ground. In the set-net with two bag-nets, we compared the amount of catch of both bag-nets by the means of switching on and off the each attracting lamps in order, switching off the attracting lamps in order which had been switched on and moving an attracting lamp.In the bag-net with an attracting lamp, horse mackerel, mackerel and arrow squid were caught the most, on the other hand, yellow tail Seriola quinqueradiata, striped mullet Mugil cephalus were caught in large quantities in the bag-net without attracting lamp. File fish Stephanolepis cirrhifer, Dusky spinefoot Siganus fuscescens were caught evenly in both bag-nets regardless of an attracting lamp.This result indicates that the amount of horse mackerel, mackerel, arrow squid can be increased by the use of attracting lamps in the set-net fishing method.

• 수산해양기술연구
• /
• 제33권2호
• /
• pp.109-117
• /
• 1997

우리나라 남해안의 거제도 도장포와 남해군 미조면에 설치되어 있는 수심 20m해역의 중형 정치망어구를 대상으로 길그물 및 통그물의 어군수도기능과 원통그물의 어군체유효과 등을 현장 실험을 통해 검토, 분석하였다. 어류에 Tag를 부착하고 통그물의 각부와 길그물의 주변에 방류 시켜 다음 양망과정에서 재포하였으며, 본 실험을 통해 얻은 결과를 요약해 보면, 다음과 같다. 1. 정치망의 헛통에서 방류하여 양쪽 원통 안으로 들어가 재포된 입망률은 소형 고등어가 20.3%, 소형 전갱이는 16.2%, 감성돔은 10.3%, 꼬치고기는 19.1%, 학공치는 16.3%, 전어는 20.0%였으며, 전체 방류미수 667마리 중에서 115마리로 17.2%였다. 2. 양쪽 원통에서 방류하여 다시 그 원통그물내에서 재포된 잔류율은 소형 고등어가 21.7%, 소형 전갱이는 21.5% 감성돔은 6.7%, 꼬치고기는 17.8% 학공치는 16.8% 전어는 19.1%를 나타냈으며, 전체 방류이수 1,513마리 중에서 284마리로 18.8%였다. 그리고 81.2%는 원통그물로부터 빠져나갔다. 3. 창문으로부터 25m거리의 길그물 양측 지점에서 방류하여 헛통으로 들어간 비율, 즉 길그물의 수도율은 소형 고등어가 58.9%, 소형 전갱이는 74.6%, 감성돔은 38.0%, 꼬치고기는 54.7% 학꽁치는 58.6%, 전어는 54.5%였으며, 총방류미수 1,086마리 중에서 627.4마리로 평균 57.8%를 나타내었다. 따라서 소형 고등어, 소형 전갱이, 꼬치고기, 학공치 및 전어는 길그물의 차단수도교과가 크게 작용하는 어종으로 나타났다. 4. 꼬치고기, 학공치, 전어는 조상측의 원통그물에 많이 입망되었고, 소형 전갱이와 감성돔은 조하측 원통그물에서 많이 입망되었다. 5. 소형 고등어와 소형 전갱이는 조하측 원통그물에서 잔류율이 높았고, 감성돔, 꼬치고기 및 학공치는 조상측 원통그물에서 잔류율이 높았다.

• 대한전자공학회논문지
• /
• 제19권3호
• /
• pp.28-36
• /
• 1982

페트리넷은 컴퓨터에서 사회 문제에 이르기까지 시스템을 모텔링하는데 다양하고 광범위하게 사용하였다. 이 논문은 백(bag)이론을 이용하여 궤트리넷의 성질을 수학적으로 정의한다. 사건-조건 컴퓨터프로그램 컴퓨터 조작 및 공정권에 대한 궤트리넷 모델링법을 설명한다. 그리고 터널다이오드 발진회로를 페트리넷으로 표시하고 프로그램과 시뮬레이숀을 한 다음 결과를 제시한다.

• 한국수산과학회지
• /
• 제28권2호
• /
• pp.194-201
• /
• 1995

본 실험에서는 자루그물의 구조와 형상 및 사용 그 물감의 규격의 변화에 따른 저항의 변화를 조사하고, 그 저항이 전보에서 구한 저항식에 의해 정도 높게 해석되는가를 확인하기 위하여, 유연도가 큰 Nylon 그물감으로 자루그물을 사각추형으로 설계하고 상기 각 요소들을 변화시켜 회류수조(관측부 길이 : 7.00m, 수로 폭 : 1.45m, 수심 : 1.20m)에서 유속 v에서 받는 저항 R을 측정한 후, $R=kSv^2$(S: 그물 벽의 면적)에 의해 저항계수 $k(kg\;\cdot\;sec^2/m^4)$를 구하고 k로써 각각의 경우를 비교하였다. 실험에서 얻어진 결과를 요약하면 대략 다음과 같다. 1) 정사각추형으로 설계된 자루그물의 입구를 둘레가 서로 같은 원형 틀과 정사각형 틀에 교대로 부착하면, 수중 형상은 원형 틀에서는 매끈한 원추형이 되고 정각각형 틀에서는 입구 주변만을 제외한 나머지 모든 부분이 원추형이 되었기 때문에, k값에는 별다른 차리가 생기지 않았다 또한, 직편각추형으로 설계된 자루그물을 직체각형 틀에 부착하면 입구 주변만을 제외한 나머지 모든 部分이 타원추형이 되었는데, 그 때의 k값은 정사각추형으로 설계된 그물이 수중에서 원추형을 이루는 경우와 거의 같았다. 2) 정사각추형으로 설계된 자루그물에 대해 발의 길이 1에 대한 지름 d의 비 d/1를 변화시키면 k는 d/1가 큰 그물일수록 커지는 경향이었고, 입구 면적 $S_m$ 및 그물감의 재료는 일정하게 하고 $S/S_m$ 또는 흐름에 대한 그물의 영각 $\theta$를 변화시키면 k는 $S/S_m$가 커질수록 작아지는 경향이었다. 그러나, $kS/Sm$는 $S/S_m=1-4$ 또는 $\theta=15-90^{\circ}$의 범위에서는 거의 일정하였고, $S/S_m>4$ 또는 $\theta<15^{\circ}$ 직선적으로 증가하였다. 3) 본 실험에서 얻은 결과를 전보에서 구한 그물 저항식에 의해 해석하면, 자루그물에 있어 그물코의 면적에 대한 발의 체적의 비 $\lambda$ 즉 $$\lambda={\frac{\pi d^2}{21\;sin\;2\varphi}$$를 대표치수로 하는 레이놀즈수를 $R_e$라 하고($2\varphi$: 그물코의 전개각), 흐름에 수직인 평면에 대한 그물의 총 투영면적을 $S_n$이라 할 때, $R_e<100$의 영역에서는 $$k=160R_e\;^{-01}(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$으로 주어졌고 $R_e\geq100$ 영역에서는 $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$으로 주어졌다. 이러한 결과는 전보에서 구한 k와 일치하는 것이므로, 전보에서 구한 k는 자루그물에 대한 책험의 결과와 잘 일치한다는 것을 알 수 있었다.

• 수산해양기술연구
• /
• 제54권1호
• /
• pp.12-24
• /
• 2018

This study was conducted in order to improve opening efficiency of the miniaturized large-scale net for anchovy boat seine gear to reduce the fleet size. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 150, 300 and 450 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the miniaturized large-scale net was as follows: the front part of the wing net, 8.7-13.3 m, 51-78%; the middle part of the wing net, 28.1-34.2 m, 55-67%; the entrance of the inside wing net, 31.3-38.5 m, 60-73%; the square and bosom, 22.7-29.6 m, 47-62%; the entrance of the body net, 20.9-26.4 m, 42-52%; the entrance of the bag net, 17.2-21 m, 72-89%; the flapper, 13.2-15.3 m, 78-83%; and the end of the bag net, 13.2-15.7 m, 72-75%. By connecting the net pendants with the front part of the wing net, the opening of the front part of the wing net was significantly improved compared to the traditional gear, which ensured both the wing net and the inside wing net with a normal net height. This, in turn, increased the efficiency of herding. The height of the body and bag nets was also higher than that of the tradition gear. In particular, the body net attached to the gear significantly improved the pocket shape of the gear and reduced the number of fish that were caught and escaped from the bag net, which increased the rate of fishing. The tension of towing nets was measured approximately between 2,958 and 7,110 kg, which indicates that the fleet can tow nets with 350 ps, the standard engine horse power. The fishing operation time was shortened compared with of the existent net, and the large-scale buoy attachment operation was also possible to operate the ship without fish detecting boat.

• 수산해양기술연구
• /
• 제54권1호
• /
• pp.1-11
• /
• 2018

This study was conducted in order to improve fishing gear for existent net of the anchovy boat seine. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 100, 300, and 500 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the existent net was as follows: the middle part of the wing net, 12.9-26.6 m, 19-39%; the entrance of the inside wing net, 23.3-35.3 m, 40-60%; the square and bosom, 18.4-24.2 m, 37-49%; the entrance of the bag net, 19.0-23.3 m, 79-96%; the flapper, 13.2-15.3 m, 142-161%; and the end of the bag net, 13.2-15.7 m, 51-61%. The actual net opening of each part of the existent nets used in this study was lower than that of the design net height, due to the low net height of the wing net and the inside wing net, it limited a range of the net height of the square and bosom. The opening of the entrance of the bag net caused the net pocket shape and inflated some parts of the nets. The tension of towing nets was measured between 4.4 and 11.0 tons, and it is necessary to reduce the structure and improve the structure of the bag net.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.281-289
• /
• 2011

The purpose of this study is to identify the flow resistance of the bottom trawl net. The bottom trawl net being used in the training ship of Chonnam National University was selected as a full-scale net, and model nets such as 1/10, 1/25 and 1/50 of the actual net were made. Total resistance of the net part, the height of the net mouth and the flow resistance of components of the net such as wing, bag and cod-end part was measured, converted into full-scale and compared. Additionally, the model rule of Tauti (1934), which has been most frequently used in fishing net modeling experiments, was applied to interpret flow resistance and scale effect of model experiment was investigated. Presumed that the flow resistance R is $R=kS{\upsilon}^2$ against the flow velocity of each net ${\upsilon}$, resistance coefficient k was calculated by substituting R, ${\upsilon}$ and S of the net. From the result, it was found that k decreases exponentially when u increases which makes $k=c{\upsilon}^{-m}$. Whereas m of each net is ranged between 0.13-0.16 and there was not significant difference between nets. c does not show big difference in 1/10 and 1/25 model and the value itself was relatively bigger than in 1/50 model. The height of the net mouth of 1/25 and 1/50 model net h decreases exponentially according as ${\upsilon}$ increases to make $h=d{\upsilon}^{-n}$. Whereas d and n values were almost same in two nets. Additionally, when resistance of cod-end, wing and bag part in 1/25 and 1/50 model nets, both nets showed big resistance in bag part when flow is 1m/s as more than 60%. Wing and cod-end part showed almost same value or wing part had little bit larger value. On the other hand, when reviewing the reasons why both models showed difference in 1/50 model while c value against the resistance coefficient k did not show big difference in 1/10 and 1/25 model, it is inferred that the difference occurred not from material difference but from the difference in net size according to scale. It was judged that they are the scale effects concomitant to the model experiments.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.203-211
• /
• 2015

The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti's modeling rule and Kim's modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net ${\upsilon}$. Because resistant coefficient k decreases exponentially according as flow velocity ${\upsilon}$ increases to make $k=c{\upsilon}^{-m}$, c and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti's modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given $c=4.9(kgf{\cdot}s^2/m^4)$ and m=0.45, R (kgf) of bottom pair trawl net could show $R=4.9S{\upsilon}^{1.55}$ using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.