• Title/Summary/Keyword: Bactericidal effect

Search Result 306, Processing Time 0.029 seconds

Synergistic effect of lysozyme on bactericidal activity of magnolol and honokiol against a cariogenic bacterium, streptococcus mutans OMZ 176

  • Bae, Ki-Hwan;Oh, Hong-Rock
    • Archives of Pharmacal Research
    • /
    • v.13 no.1
    • /
    • pp.117-119
    • /
    • 1990
  • A combination of magnolol or honokiol with lysozyme isolated from the egg white of the Korean Ogol fowl (Korean natural monument No.265) exhibited synergistic effect of bactericidal activity against a typical cariogenic bacterium, Streptococcus mutans OMZ 176. The synergistic ratio increased with time dependence.

  • PDF

Additional Effect of Zeolite Based on Bactericidal Activated Carbon Spheres with Enhanced Adsorption Effect and Higher Ignition Temperature

  • Zhu, Lei;Ye, Shu;Asghar, Ali;Bang, Seong-Ho;Oh, Won-Chun
    • Journal of the Korean Ceramic Society
    • /
    • v.53 no.1
    • /
    • pp.68-74
    • /
    • 2016
  • In this study, the fabrication of zeolite combined activated carbon spherical samples was carried out as follows. Briefly, ZSM-5 zeolite and activated carbon were composed as main absorbent materials; by controlling the weight percentage of zeolite and binder materials, a series of spherical samples (AZP 4, 6, 8) were prepared. These spherical samples were characterized by BET, XRD, SEM, EDX, and pressure drop; benzene and iodine adsorption tests, bactericidal effect test, and ignition temperature test were also performed. The adsorption capability was found to depend on the BET surface area; the spherical samples AZP6 with high BET surface area of $1011m^2/g$ not only exhibited excellent removal effects for benzene (24.9%) and iodine (920mg/g) but also a good bactericidal effect. The enhanced ignition temperature may be attributed to the homogeneous dispersion conditions and the proper weight percentage ratio between zeolite and activated carbon.

Analysis of the mechano-bactericidal effects of nanopatterned surfaces on implant-derived bacteria using the FEM

  • Ecren Uzun Yaylaci;Mehmet Emin Ozdemir;Yilmaz Guvercin;Sevval Ozturk;Murat Yaylaci
    • Advances in nano research
    • /
    • v.15 no.6
    • /
    • pp.567-577
    • /
    • 2023
  • The killing of bacteria by mechanical forces on nanopatterned surfaces has been defined as a mechano-bactericidal effect. Inspired by nature, this method is a new-generation technology that does not cause toxic effects and antibiotic resistance. This study aimed to simulate the mechano-bactericidal effect of nanopatterned surfaces' geometric parameters and material properties against three implant-derived bacterial species. Here, in silico models were developed to explain the interactions between the bacterial cell and the nanopatterned surface. Numerical solutions were performed based on the finite element method. Elastic and creep deformation models of bacterial cells were created. Maximum deformation, maximum stress, maximum strain, as well as mortality of the cells were calculated. The results showed that increasing the peak sharpness and decreasing the width of the nanopatterns increased the maximum deformation, stress, and strain in the walls of the three bacterial cells. The increase in spacing between nanopatterns increased the maximum deformation, stress, and strain in E. coli and P. aeruginosa cell walls it decreased in S. aureus. The decrease in width with the increase in sharpness and spacing increased the mortality of E. coli and P. aeruginosa cells, the same values did not cause mortality in S. aureus cells. In addition, it was determined that using different materials for nanopatterns did not cause a significant change in stress, strain, and deformation. This study will accelerate and promote the production of more efficient mechano-bactericidal implant surfaces by modeling the geometric structures and material properties of nanopatterned surfaces together.

Preparation and Characterization of Water-Soluble Phosphate Glasses Containing Cu by Sol-Gel Method (졸-겔법에 의한 Cugkadb 인산염계 수용성 유리의 제조 및 특성)

  • 오승환;최세영;김경남
    • Journal of the Korean Ceramic Society
    • /
    • v.35 no.4
    • /
    • pp.319-324
    • /
    • 1998
  • Sol-gel derived phosphate water-sioluble glasses containing Cu were prepared. Powder-shape of glasses were added in D.I water used polyethylene bottle. After solution contained glass powder were submerged in water bath on 25$^{\circ}C$ their dissolution behavior/characteristics bactericidal effect and cytotoxicity test were evaluated. The maximum amount of Cu(35 mol%) via sol-gel method was more 5 mol% increased than that with melting process. The stage of total dissolution was more dominant than that of selective leaching dur-ing dissolution due to dissolved amount of glasses increased linearly with time. The ratio of Cu+ to {{{{ {Cu }^{2+ } }} was 3:7 so that the structure of glasses is more predominant 2-dimension chain structure than 3-dimenshion po-lymeric structue. The stage of total dissolution was more dominant than that of selective leaching during dissolution. Bactericidal effect against all bacteria showed that solutions which contained 40 ppm and 100 ppm of Cu killed 80 percentages of bacteria within 2 hours and 100 percentages of those within 12 hours. The results of cytotoxicity test for L929 cells showed no cytotoxicity were observed within 96 hours for dis-solved solution that contains 40 ppm and 100 ppm of Cu.

  • PDF

TiO$_2$ 광촉매를 이용한 중형 살균장치제작 및 최적살균조건 확립

  • Kim, Jung-Gon;Kim, Yong-Ho;Lee, Yeong-Sang;Lee, Jeong-Seop;Park, Don-Hui;Kim, Si-Uk
    • 한국생물공학회:학술대회논문집
    • /
    • 2001.11a
    • /
    • pp.564-567
    • /
    • 2001
  • Optimal bactericidal conditions of pilot scale UV-$TiO_2$ photoreractor were studied. As the inner diameter of reactor increased. the bactedcidal efficiency decreased. Similarly bactedcidal effect was elevated according to the higher concentration of $TiO_2$. however. the effect was not repressed by the highest concentration(6.000 $mg/{\ell}$)of $TiO_2$ Bactericidal effect of muscovite bead was higher than that of glass bead. When bacterial cells were applied to the photoreacter for 1. 5. and 15 min, bactericidal effects were 62, 94.3. and 99.8%, respectively. When 30 $mg/{\ell}$ of $H_2O_2$ was added to the reaction mixture and sterilized for 5 min, the bactericidal efficiency was 99.8%.

  • PDF

In vitro investigation of the antibacterial and anti-inflammatory effects of LED irradiation

  • Jungwon Lee;Hyun-Yong Song;Sun-Hee Ahn;Woosub Song;Yang-Jo Seol;Yong-Moo Lee;Ki-Tae Koo
    • Journal of Periodontal and Implant Science
    • /
    • v.53 no.2
    • /
    • pp.110-119
    • /
    • 2023
  • Purpose: This study aimed to investigate the proper wavelengths for safe levels of light-emitting diode (LED) irradiation with bactericidal and photobiomodulation effects in vitro. Methods: Cell viability tests of fibroblasts and osteoblasts after LED irradiation at 470, 525, 590, 630, and 850 nm were performed using the thiazolyl blue tetrazolium bromide assay. The bactericidal effect of 470-nm LED irradiation was analyzed with Streptococcus gordonii, Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum, Porphyromonas gingivalis, and Tannerella forsythia. Levels of nitric oxide, a proinflammatory mediator, were measured to identify the anti-inflammatory effect of LED irradiation on lipopolysaccharide-stimulated inflammation in RAW 264.7 macrophages. Results: LED irradiation at wavelengths of 470, 525, 590, 630, and 850 nm showed no cytotoxic effect on fibroblasts and osteoblasts. LED irradiation at 630 and 850 nm led to fibroblast proliferation compared to no LED irradiation. LED irradiation at 470 nm resulted in bactericidal effects on S. gordonii, A. actinomycetemcomitans, F. nucleatum, P. gingivalis, and T. forsythia. Lipopolysaccharide (LPS)-induced RAW 264.7 inflammation was reduced by irradiation with 525-nm LED before LPS treatment and irradiation with 630-nm LED after LPS treatment; however, the effects were limited. Conclusions: LED irradiation at 470 nm showed bactericidal effects, while LED irradiation at 525 and 630 nm showed preventive and treatment effects on LPS-induced RAW 264.7 inflammation. The application of LED irradiation has potential as an adjuvant in periodontal therapy, although further investigations should be performed in vivo.

Synergistic Effect in Combination of Danshen (Salvia miltiorrhiza) Extracts with Antibiotics against Methicillin-resistant Staphylococcus aureus

  • Cha, Jeong-Dan
    • Food Science and Biotechnology
    • /
    • v.18 no.5
    • /
    • pp.1263-1272
    • /
    • 2009
  • Danshen (Salvia miltiorrhiza Bunge) is a traditional Korean medicine that is commonly used for the treatment of inflammatory diseases such as edema, arthritis, hepatitis, and endangitis. The several extracts of danshen were tested for antimicrobial activity against methicillin-resistant Staphylococcus aureus (MRSA) isolated in clinic by broth microdilution method, the checkerboard, and time-kill methods to evaluate the synergistic effects of the combination of the extracts with antibiotics. The chloroform ($CHCl_3$) and n-hexane (HEX) extracts [minimum inhibitory concentration (MIC), 0.0078-0.3125${\mu}g/mL$; minimum bactericidal concentration (MBC), 0.019-0.625${\mu}g/mL$] were found to have strong antibacterial activity against MRSA. Additionally, when the $CHCl_3$ and HEX extracts were co-administered with ampicillin or oxacillin, a synergistic effect against MRSA was observed. Furthermore, a time-kill study evaluating the effects of the extracts against MRSA indicated that treatment with the $CHCl_3$ extract in combination with ampicillin or oxacillin produced rapid bactericidal activity. These results suggest that danshen extracts may have potently antimicrobial activity and thus, it can be a suitable phytotherapeutic agent for treating MRSA infections.

Preparation of MWCNT/TiO2 Composites by Using MWCNTs and Titanium(IV) Alkoxide Precursors in Benzene and their Photocatalytic Effect and Bactericidal Activity

  • Oh, Won-Chun;Zhang, Feng-Jun;Chen, Ming-Liang
    • Bulletin of the Korean Chemical Society
    • /
    • v.30 no.11
    • /
    • pp.2637-2642
    • /
    • 2009
  • In this present paper, we prepared $MWCNT/TiO_2$ composites by using pre-oxidized multi-walled carbon nanotubes (MWCNTs) with different titanium alkoxide precursors in benzene solvent. The composites were comprehensively characterized by BET surface area, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and UV-Vis absorption spectroscopy. The photoactivity of the prepared materials, under UV irradiation, was tested using methylene blue (MB) in aqueous solution. Finally, according to the results of MB removal experiment, it can be considered that the MB degradation infect mainly caused by photocatalytic effect of $TiO_2$. Furthermore, the bactericidal test of the composites was also determined. It was indicated that $MWCNT/TiO_2$ composites with sunlight had greater effectiveness for B. cereus, S. aureus and E. coli than any other experimental conditions.

Bactericidal Effect of Osmotic Shock Against Vibrio vulnificus (Osmotic Shock에 의한 Vibrio vulnificus 사멸에 관한 연구)

  • Rhee, Joon-Haeng;Cho, Soon-Heum;Chung, Sun-Sik
    • The Journal of the Korean Society for Microbiology
    • /
    • v.22 no.2
    • /
    • pp.109-116
    • /
    • 1987
  • As a process to establish an effective preventive measure of V. vulnificus septicemia, bactericidal effect of distilled water against V. vulnificus was studied. When about $2.0{\times}10^7\;CFU/ml$ of V. vulnificus was inoculated in distilled water, a dramatic decrease in the number of viable bacteria by 5 to $6LOG_{10}$ was observed in 5 minutes. Bactericidal kinetic curves could be divided into the first rapid killing phase until 1 minute and the later slow killing phase after then, showing the heterogeneity of the bacterial population inoculated. When V. vulnificus was inoculated in saline solutions having various salinities, significant decrease in the number of viable bacteria was noted only at salinities under 0.2%. The higher was the concentration of NaCl, the greater was the degree of protection against osmotic shock. When glucose, NaCl, $MgCl_2$, and $CaCl_2$ were diluted with deionized water to give same osmolarities and V. vulnificus was inoculated in each of them to compare the bactericidal curves plotted during the first 5 minutes after inoculation, the protection efficiencies were in the order of $MgCl_2>CaCl_2{\gg}NaCl{\gg}glucose$. Above results indicate that treatment(or thorough washing) of contaminated sea animals or other products with distilled water can be used as a preventive measure of V. vulnificus septicemia, and divalent cations can protect V. vulnifcus to osmotic shock with high efficiency.

  • PDF

Bactericidal Effects of Nano-silver Liquid Against Various Plant Pathogenic Bacteria (은 나노 용액의 식물병원성 세균에 대한 살균활성)

  • Kim, Sang-Woo;Min, Ji-Seon;Lee, Youn-Su
    • Research in Plant Disease
    • /
    • v.15 no.2
    • /
    • pp.130-133
    • /
    • 2009
  • We have conducted in vitro experiments with nano-silver liquid for their effect against various plant pathogenic bacteria. Different types of nano-silver liquid WA-CV-WA13B, WA-AT-WB13R and WA-PR-WB13R were used. These are classified based on different manufacturing processes. The tested bacteria were provided by KACC. We experimented ten bacterial isolates in Clavibacter, Erwinia, Pseudomonas, Ralstonia, and Xanthomonas genera. In order to determine the level of concentrations of control effects, different concentrations (10, 25, 50, and 100 ppm) of each different nano-silver liquid were added in the culture media. As a result, WA-CV-WA13B showed high inhibition effect against C-1 at 10 ppm, and showed minor inhibition effects against P-6, X-1, and X-2. WA-AT-WB13R showed bactericidal effect against P-6 at 10 ppm. At 10 ppm, WA-AT-WB13R showed relatively high inhibition effects against C-1, X-1, and X-2. WA-PR-WB13R showed bactericidal effects against P-5, P-6 and X-2 at 10 ppm or higher concentrations. All the tested three nano-silver liquid showed bactericidal effects against all the tested plant pathogenic bacteria at concentrations of 25 ppm or higher. These results indicated the possible use of nano-silver liquid for the control of plant pathogenic bacteria.