• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.441-446
• /
• 2000

Wigner functions and density matrices are computer simulated for various quantum mechanical states of light. Wigner function and density matrices are evaluated by filtered back projection which includes inverse Radon transform from the distribution function of the photocurrents, which are calculated in the balanced homodyne detection scheme. The density matrix is also directly obtained by using the pattern function from the simulated phase independent photocurrent distribution function. ction.

• Journal of Veterinary Clinics
• /
• v.21 no.2
• /
• pp.187-190
• /
• 2004

A mixed case of multiple sebaceous gland adenoma and perianal gland adenoma was found in a 11-year-old male Shih Tzu dog. Grossly, many masses less than 1 cm in diameter of back skin and single red-brown mass about 0.5 cm in diameter of inner ear were noted. In addition one of light-pink mass 5 cm in diameter was presented in the anus. All of the masses were well demarcated and dome-shaped or papillated nodules. Histologically, the mass from back and ear were composed with multiple irregular shaped or sized lobules of sebaceous glands. Masses were containing mostly mature sebaceous cells and multifocal cystic degeneration with acellular and bright eosinophilic materials. And the mass from peri-anal area was well-circumscribed and composed of broad, anastomosing trabeculae of well-differentiated hepatoid cells. There were very low mitotic figures in all masses. Based on these results, this case was diagnosed as the multiple sebaceous gland adenoma and perianal gland adenoma.

• Journal of Power System Engineering
• /
• v.7 no.2
• /
• pp.51-55
• /
• 2003

Recently the requirements for light weight and high performance of the automobile have increased. Especially, the plastic fuel tube makers have made their efforts to dove]op the various plastic fuel tube module with not only dimensional accuracy but also cost competitiveness. The experiment is performed to investigate spring backs for PA12 plastic fuel tubes in case of compound bending. In the experiment, steam bending process is adopted as bending method. In this study, the results we obtained are used to design the bending fixtures and the compound bending system.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.368-375
• /
• 1995

A computer vision system was built to generate images of a stationary egg. This system includes a. CCD camera, a frame grabber, and an incandescent back lighting system An image processing algorithm was developed to accurately detect surface holes and surface cracks on eggs. With 20W of incandescent back light, the detection rate was shown to be the highest. The Sobel operator was found to be the best among various enhancing filters examined. The threshold value to distinguish between the crack and the translucent spots was found to be linear with the average gray level of a whole egg image. Those values of both gray level and area were used as criteria to detect holes in egg and those values of both area and roundness were used to detect cracks in egg. For a sample of 300 eggs, this system was able to correctly analyze an egg for the presence of a defect 97.5% of the time. On the average, it took 59.5 seconds to analyze an egg image and determine whether or not it was defected.

• Steel and Composite Structures
• /
• v.24 no.3
• /
• pp.351-358
• /
• 2017

Due to the increasing competition, automotive manufacturers have to manufacture highly safe and light vehicles. The parts which make up the body of the vehicle and absorb the energy in case of a crash, are usually manufactured with sheet metal forming methods such as deep drawing, bending, trimming and spinning. The part may get thinner, thicker, folded, teared, wrinkled and spring back based on the manufacturing conditions during manufacturing and the type of application methods. Transferring these effects which originate from the forming process to the crash simulations that are performed for vehicle safety simulations, makes accurate and reliable results possible. As a part of this study, firstly, the one-step and incremental sheet metal forming analysis (deep drawing + trimming + spring back) of vehicle front bumper beam and crash boxes were conducted. Then, crash performances for cases with and without the effects of sheet metal forming were assessed in the crash analysis of vehicle front bumper beam and crash box. It was detected that the parts absorbed 12.89% more energy in total in cases where the effect of the forming process was included. It was revealed that forming history has a significant effect on the crash performance of the vehicle parts.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.162-166
• /
• 1993

Spodumene$(LiAlLi_2O_6)$ single crystal was grown by Floating Zone process using the image furnace having the halogen lamp as heat sources. The crystal had the dimension of 50~60mm length and 6~8mm diameter. The colors of as-grown crystals were green, black and pale green respectively. The composition of the crystal was analized by XRD and FUR measurement. Growth orientation was examined by Laue back reflection pattern and for measuring the light transmittance, OPtical transmittance was measured.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.110-115
• /
• 2008

In this paper, we have designated a 42-inch RGB LED BLU, 80 % above illuminance. A desirable brightness performance was attained, by doing anti-parallel configuration, a fitting of LED's strip distance and a height of the top of LED to the back of the LCD. We get the 85.81 % of the brightness uniformity which has 12.8 mm away from LED's top and LCD's back and 51.41 mm of the same spacing between LED's strip in simulation and 82.24 % in experiment.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.682-686
• /
• 2005

Recently the study is being addressed on the energy economy as greatly as possible. The researches on light source that have higher efficiency than the exiting are performing. The high-power LED is the representative one among those. There are two fields in the research on the high-power LED, the ordinary illuminating apparatus and the night illuminating apparatus using wind and solar energy. In this paper, we validated the probability of using high-power LED as illuminating apparatus and proposed the novel LED power equipment that has more stability and better efficiency than the exiting method. By using the propose method the -R-E-A-C-T is reduced and the efficiency improved.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.3
• /
• pp.27-31
• /
• 2012

This paper presents a study on the design of photovoltaic system with reversal tracking reflector. The reversal tracking reflector is conceptually designed by using TRIZ. The 20 to 30% of incident rays cannot produce the current and reflected back to the glass surface because of high refractive index of solar cell which are produced from Si, GaAs. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The reflector which has the actuator can be trackback the sun. Reversal tracking reflector which mounted on the top of the system prevents the shadowing loss and improve the efficiency of track back function. The anti-glare reflector prevents the heat due to the concentrated reflected light rays.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.124-133
• /
• 1994

Many of non-contact measuring systems are used to estimate surface characteristics owing to their advantages of high speed and undanaged test. In this paper, a new measuring system is proposed to acquire image from CCD camera through back light illumination. Lowpass filter is very useful in view of noise removal and optimum binary image can be made through histogram equalization which is one of the histogram technique to maximize brightness intensity between workpiece and background. Laplacian operator is used to detect workpiece edge from binary image. In case of image treatment applying Laplacian operator, surface roughness is calculated by introducing conversion coefficient for coordinate of pixel which edge is composed of. In summary, the work is concerned with the development of a new technique for roughness measurement by the image processing in turning.