• The Journal of Korean Physical Therapy
• /
• v.3 no.1
• /
• pp.123-149
• /
• 1991

This study has been attempted to be helpful for the back rehabilization of Korean workers by analyzing the general, occupational, social aspects of low back pain and to identify possible risk factors for back pain in White and Blue collar workers. The primary data were collected from 380 workers in Seoul city by means of a Questionnaire with random which was distributed from March 10 to 31, 1990. For the test of statistical significance, chi-square analysis was used to compare the back pain characteristics between above two groups. The results were as follows : 1. The incidence of low back pain in all walkers studied was $79.7\%$. The incidence of Blue collar with low back pain $(87.2\%)$ was higher than that of White collars $(75.0\%)$. 2. With regard to the relationship of back pain to the occupational characteristics, statistically significant differences were observed between workers with and without back pain concerning the job factors on work-time, job satisfaction, mental stress, chair fittness, work posture, work rotation, weight lifting, monotonous repetitive movements, vibration, and heavy noise (p<0.05). 3. With regard to the relationship of back pain to the social characteristics, there were no differences with respect to having car, personality types, drinking habits, and leisure-time activities. However, significant differences were showed between no pain and pain groups for the using bed, sleeping posture, traffic time amount, walking health state, smoking habits, and physical exercise (p<0.05). 4. The comparative analysis of back pain related to work factors showed highly significant differences with respect to mental stress, chair fittness, work posture, trunk rotation, weight lifting, monotonous repetitive work in White collar group (p<0.01) ; and job satisfaction, mental stress, trunk rotation, weight lifting, monotonus repetitive work, exposure to vibration and heavy noise in Blue collar group(p<0.01). 5. The comparative analysis of social factors in two groups showed differences with respect to the using bed, sleeping posture, walking amount, health state, physical exercise, smoking habits in White cellar group (p<0.05) ; and walking amount, traffic time amount, health state, smoking habits, physical exercise in Blue cellar group (p<0.05). 6. In regard to the general aspects of back pain between two groups, there were differences concerning etiolgy of back pain, counselling partners, treatment types, and sick-leaves(p<0.05), except pain duration, and awareness of back pain.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.357-366
• /
• 2004

The purpose of this study is to classify the types of men's back and chest through the criteria which represent the characteristic of men's back and chest. We have the following conclusions based on our sample size of 291 men's back and chest. The result of factor analysis concerned with men's back indicates that six factors are extracted and they are consist of 80.6% of total variance. We divide the shape of back into three categories: bent, protrusion of the scapula, and breadth. Each category is divided into subcategories. According to the frequency based on our data entries of 291 men's back, we introduce five new types of men's back. 83.8% of examined men's back belong to one of these five types: (i) 15.5% of protrudent and lordotic type; (ii) 6.5% of flat and lordotic type; (iii) 22.7% of protrudent and normal type; (iv) 34.4% of flat and normal type; (v) 4.8% of flat and bent type. The result of factor analysis related to with men's chest shows that six factors are extracted and they are consist of 76.0% of total variance. We divide the shape of chest into three categories: thickness, breadth, and protrusion of the breast. Each category is divided into subcategories. According to the frequency based on our data entries of 291 men's chest, we introduce four new types of men's chest. 65.0% of examined men's chest belong to one of these four types: (i) 7.2% of full and well-developed type; (ii) 24.1% of full and developed type; (iii) 25.8% of flat and developed type; (iv) 7.9% of flat and under-developed type. In order to consider the shape of the upper body as a whole, the back and the chest types should be corresponded.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.355.2-355
• /
• 1999

The spnng back phenomena occurring in the coiling process of a steam generator tube induces the dimensional inaccuracy and makes the coiling procedure difficult. In this research, an analytical model was developed to evaluate the amount of the spring back for SMART steam generator tubes. The model was developed on the basis of beam theory and elastic-perfectly plastic material property. This model was extended to consider the effect of plastic hardening and the effect of the tensile force on the spring back phenomena. Parametric studies were performed for various design variables of steam generator tubes in order to minimize the spring back in the design stage. A sensitivity analysis has shown that the low yield strength, the high elastic modulus, the small helix diameter, and the large tube diameter result in a small amount of the spring back. The amount of the spring back can be controlled by the selection of adequate design values in the basic design stage and reduced to an allowable limit by the application of the tensile force to the tube during the coiling process.rocess.

• Geotechnical Engineering
• /
• v.9 no.1
• /
• pp.21-30
• /
• 1993

To know the importance of soil paramters which are used to estimate the deformation and porepressure of soil, the sensitivity for soil parameters in elastic analysis is analyzed. Using the consolidation teat results of several cohesive soils, soil parameters are estimated by back analysis method, and from the parameters the deformations and porepressures of the soil are estimated by elastic analysis, In elastic analysis for soil-deformation and porepressure, the sensitivity for the Young's modulus is large, and the esimation of Young's modulus is more important in pro- portion to the size of stress. Using the measured results during initial short period in small stress, the soil parameters can be correctly estimated by back analysis method. To decrease the iteration number in back analysis and to get the better paramters, the initial measurements in more nodes are required and the more accurate initial measurements are required.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.1-10
• /
• 2007

In general, the tension forces of hanger cable in suspension bridges play an important role in evaluating the bridge conditions. The vibration method, as a conventional one, has been widely applied to estimate the tension forces by using the measured frequencies on hanger cables. However, the vibration method is not applicable to short hanger cables because the fiequencies of short cables are severely sensitive to flexural rigidity. Thus, in this study, the tension forces of short hanger cables, of which the length is shorter than 10 meters, were estimated through back analysis of the cable fiequencies measured from Gwang-An suspension bridge in Korea. Direct approach to back analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method is able to search the optimal tension forces without regard to the initial ones and has a rapid convergence rate. To verify the feasibility of back analysis, the results from back analysis and vibration method are compared with the design tension forces. From the comparison, it can be inferred that back analysis results are more reasonable agreement with the design tension forces of short hanger cable. Therefore, it is concluded that back analysis applied in this study is an appropriate tool for estimating tension forces of short hanger cables.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.5
• /
• pp.418-426
• /
• 2016

This paper analyzes the effect of resistance error to the performance of sensorless drive system of surface-mounted permanent magnet synchronous machine (SMPMSM) based on the back-EMF observer. The analysis shows that the bandwidth of the entire sensorless drive system decreased in the low-speed region when using smaller resistance value than the actual one in the back-EMF observer. Even if the back-EMF observer invokes estimation error, the entire sensorless drive system does not make any steady-state position error. These characteristics may have positive effects such as extension of the low speed limit that goes further down in the sensorless drive. The validity of the analysis is verified by the experimental setup comprising the MG set.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.61-66
• /
• 2010

This paper is concerned with an analysis of the back scattering of electromagnetic waves from a target moving along random rough surfaces such as the desert, and sea. First, the discrete ray tracing method(DRTM) is introduced, and then, this method is applied to the back scattering problem in order to investigate the effect of the back scattering from random rough surfaces on the electric field intensities. Finally, numerical examples of various height deviations of the Gaussian type of rough surfaces are shown. It is numerically demonstrated that the back scattering is dominated by the diffractions related to the reflections from the random rough surfaces.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.5
• /
• pp.660-665
• /
• 2014

This paper presents the improved back-EMF of Interior Permanent Magnet Synchronous Generator(IPMSM) for small hydropower generator. To improve back-EMF characteristics, the size and position of notch are applied to the rotor. In addition, parametric analysis of the notch size and position was performed. Finally, the back-EMF characteristic analysis are confirmed by the experimental results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.16-24
• /
• 2007

The high-frequency analysis method of back-scattering cross section spectrum of rotating targets is established. The time history of the back-scattering cross section is calculated using a quasi-stationary approach, based on a physical optics and a physical theory of diffraction, combining an adaptive triangular beam method to consider the shadow effect. And the spectra of back-scattering cross section by the Doppler effect are analyzed applying a simple fast Fourier transform method to its time history. The numerical calculation for rotating targets, such as rotating metal plates and underwater propeller, are carried out. The time history appears to be periodic with respect to the number of wings. The backscattering cross section spectrum level and its frequency shift are dependent on the rotating speed, direction, and the shape of the targets.

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.